Synthesis and properties of cross‐linked polymers from epoxidized rubber seed oil and triethylenetetramine

A series of epoxidized oils were prepared from rubber seed, soybean, jatropha, palm, and coconut oils. The epoxy content varied from 0.03 to 7.4 wt %, in accordance with the degree of unsaturation of the oils (lowest for coconut, highest for rubber seed oil). Bulk polymerization/curing of the epoxidized oils with triethylenetetramine (in the absence of a catalyst) was carried out in a batch setup (1 : 1 molar ratio of epoxide to primary amine groups, 100°C, 100 rpm, 30 min) followed by casting of the mixture in a steel mold (180°C, 200 bar, 21 h) and this resulted in cross‐linked resins. The effect of relevant pressing conditions such as time, temperature, pressure, and molar ratio of the epoxide and primary amine groups was investigated and modeled using multivariable nonlinear regression. Good agreement between experimental data and model were obtained. The rubber seed oil‐derived polymer has a T_g of 11.1°C, a tensile strength of 1.72 MPa, and strain at break of 182%. These values are slightly higher than for commercial epoxidized soybean oil (T_g of 6.9°C, tensile strength of 1.11 MPa, and strain at break of 145.7%). However, the comparison highlights the potential for these novel resins to be used at industrial/commercial level. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42591.     

Tuning the interlaminar shear strength and thermo-mechanical properties of glass fiber composites by incorporation of (3-mercaptopropyl) trimethoxysilane-functionalized carbon black

The incorporation of functionalized nanoscale fillers into traditional glass fiber/unsaturated polyester (GF/UPE) composites provides a more robust mechanical attributes. The current study demonstrates the potential of 3-mercaptopropyl trimethoxysilane (MPTS)-functionalized carbon black (f-CB) for enhancing the thermo-mechanical properties of GF composites. The composites infused with 1, 3 and 5 wt% of pristine and MPTS-functionalized CB were fabricated by hand lay-up and hot press processing. Tensile testing, interlaminar shear strength (ILSS) testing and dynamic mechanical analysis were used to evaluate the performance of nanocomposites. Fourier transform infrared spectroscopy validated the MPTS functionalization of CB. Pristine CB-loaded nanocomposites exhibited marginal improvement in ultimate tensile strength (UTS), ILSS and thermo-mechanical properties. However, with the addition of f-CB, the improvement in all the studied properties was more substantial. The inclusion of 5 wt% f-CB increased the elastic modulus and UTS by 16 and 22%, respectively, whereas the ILSS was enhanced by 36%, in comparison to the neat GF composite. The scanning electron microscope analysis of fractured ILSS samples revealed better fiber-matrix adhesion and compatibility in f-CB-loaded nanocomposites. At the same filler weight percentage, the storage modulus at 25 °C was ~ 19% higher than that of neat composite. The f-CB inclusion resulted in increment of T _g by ~ 13 °C over the T _g of neat GF/UPE composite (~ 109 °C). These improvements were due to the chemical connection of f-CB to the UPE matrix and GF surface. With such improvements in thermal and mechanical properties, these nanocomposites can replace the conventional GF composites with prominent improvements in performance.     

Effect on Mechanical Performance of UHMWPE/HDPE-Blend Reinforced with Kenaf,Basalt and Hybrid Kenaf/Basalt Fiber

The aim of this study was to investigate the performance of UHMWPE/HDPE-reinforced kenaf, basalt and hybrid kenaf/basalt composites. Mechanical testing of these samples was carried out such as tensile, flexural (three-point bending) and an impact test (Charpy). Pure resin (UHMWPE/HDPE) samples were tested and compare with reinforced 10% weight fraction of kenaf, basalt and hybrid kenaf/basalt samples to identifying their contribution and potential in this new composite material. UHMWPE/ HDPE sample was produced in constant ratio 60:40 respectively via extrusion process. Basalt reinforced UHMWPE/HDPE generates the highest elastic modulus result compared to kenaf and hybrid kenaf/basalt as a reinforcement material. The tensile results of kenaf reinforcement UHMWPE/HDPE samples are significantly higher (20%) than pure blend resin, which is an indication for good performance of kenaf, basalt and hybrid kenaf/basalt to be used in UHMWPE/HDPE-blend polymers. The flexural and Charpy strengths show the drawback results, where performance of polymer is reduced 5% with the absence of kenaf. It can be concluded that kenaf, basalt and hybrid kenaf/basalt fiber successfully increase the UHMWPE/HDPE blends performance especially under tensile loading.     

Nanoarchitectonics: Porous Hydrogel as Bio-sorbent for Effective Remediation of Hazardous Contaminants

The increasing use of heavy metals, dyes, and other metallic or chemical elements causes crucial environmental pollution. Sewage that contains these heavy metals and dyes is discharged into the atmosphere and goes directly into the food cycle, causing cancerous diseases and health deterioration in living organisms. The supreme concern of today’s research is to treat wastewater and effectively remove the hazardous dye molecules from aqueous media and other environmental matrices. Nowadays, technologies are applied to rectify organic and inorganic pollutants from sewage. Among them, adsorption is a fascinating way because it is environmentally friendly, feasible, and economical biomaterials. Chitosan (CS) as bio-sorbent is endowed with valuable characteristics, such as biodegradability, biocompatibility, high reactivity, low-cost, and functional groups (–OH and NH₂) on its surface. CS is used for many applications, either as a single component or composite form. The use of CS as bio-adsorbents is beneficial over regular adsorbents. Chitosan-based hydrogel is one of the very important bio-adsorbents. All these bio-adsorbents are highly used to eradicate toxic dyes, digest harmful industrial sewage, and eliminate pesticides, climatic hazardous waste, and contaminated materials from the environment.

     

Inhibition of Bruton Tyrosine Kinase Reduces Neuroimmune Cascade and Promotes Recovery after Spinal Cord Injury

Microglia/astrocyte and B cell neuroimmune responses are major contributors to the neurological deficits after traumatic spinal cord injury (SCI). Bruton tyrosine kinase (BTK) activation mechanistically links these neuroimmune mechanisms. Our objective is to use Ibrutinib, an FDA-approved BTK inhibitor, to inhibit the neuroimmune cascade thereby improving locomotor recovery after SCI. Rat models of contusive SCI, Western blot, immunofluorescence staining imaging, flow cytometry analysis, histological staining, and behavioral assessment were used to evaluate BTK activity, neuroimmune cascades, and functional outcomes. Both BTK expression and phosphorylation were increased at the lesion site at 2, 7, 14, and 28 days after SCI. Ibrutinib treatment (6 mg/kg/day, IP, starting 3 h post-injury for 7 or 14 days) reduced BTK activation and total BTK levels, attenuated the injury-induced elevations in Iba1, GFAP, CD138, and IgG at 7 or 14 days post-injury without reduction in CD45RA B cells, improved locomotor function (BBB scores), and resulted in a significant reduction in lesion volume and significant improvement in tissue-sparing 11 weeks post-injury. These results indicate that Ibrutinib exhibits neuroprotective effects by blocking excessive neuroimmune responses through BTK-mediated microglia/astroglial activation and B cell/antibody response in rat models of SCI. These data identify BTK as a potential therapeutic target for SCI.     

BaTiO3–Bi(Mg2/3Nb1/3)O3 Ceramics for High‐Temperature Capacitor Applications

Solid solutions of (1?x)BaTiO₃–xBi(Mg_2/3Nb_1/3)O₃ (0 ≤ x ≤ 0.6) were prepared via a standard mixed‐oxide solid‐state sintering route and investigated for potential use in high‐temperature capacitor applications. Samples with 0.4 ≤ x ≤ 0.6 showed a temperature independent plateau in permittivity (ε_r). Optimum properties were obtained for x = 0.5 which exhibited a broad and stable relative ε_r ~940 ± 15% from ~25°C to 550°C with a loss tangent <0.025 from 74°C to 455°C. The resistivity of samples increased with increasing Bi(Mg_2/3Nb_1/3)O₃ concentration. The activation energies of the bulk were observed to increase from 1.18 to 2.25 eV with an increase in x from 0 to 0.6. These ceramics exhibited excellent temperature stable dielectric properties and are promising candidates for high‐temperature multilayer ceramic capacitors for automotive applications.     

Corrosion protection of commercial steel using stainless steel coatings deposited by Cathodic Arc Plasma Deposition technique

The commercial steel AISI 1010 was coated with AISI 316L steel using Cathodic Arc Plasma Deposition (CAPD) technique. The coatings were deposited in vacuum and in the presence of nitrogen, acetylene and mixture of the two as reactive gases. The coatings were deposited as a function of time while other parameters remained constant. The coatings 0.75 to 1.3 μm thick were adherent and amorphous. The aqueous corrosion properties of the coated samples in 3.5 wt % NaCl solution were studied by Tafel, cyclic and potentiodynamic polarization measurements. The derived corrosion parameters were then compared among the various uncoated and coated samples. The study revealed that the coated samples were more corrosion resistant than the uncoated one. Similarly, the samples coated in the nitrogen + acetylene mixture atmosphere were more corrosion resistant than the samples coated in only nitrogen and acetylene atmospheres. The corrosion parameters were also compared as a function of coating time to ascertain best coating thickness.     

Microstructure and hardness studies of the electron beam welded zone of Hastelloy C-276

Electron beam welding (EBW) technique is becoming popular in nuclear, chemical and aerospace industries due to its high penetration depth and fast cooling rate. Samples of Hastelloy C-276 have been welded by electron beam (EB). A scanning electron microscope (SEM) having the attachment of an energy dispersive system (EDS) has been employed to study the resulting microstructure and micro-eutectic phases. The microstructure of the molten zone (MZ) is found to be of fine lamellar type. The hardness of the MZ is found to be 35% higher compared to as-received alloy. The micro-eutectoids are rich in Mo and W. The X-ray diffraction patterns of the MZ show shifting of peaks towards higher angle compared to the diffraction pattern of the as-received alloy. Broadening of the peaks is also observed in the diffraction pattern of the MZ. Formation of the μ-phase was observed in the MZ after a tempering treatment at 950 °C.     

Ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes nanocomposites: An environmentally friendly approach

Reinforcement of PEEK by nanoparticles such as multiwalled carbon nanotubes (MWCNTs), is a promising technique to prepare PEEK nanocomposites with improved properties for promising biomedical applications. However, proper dispersion of MWCNTs in the polymer matrices is a primary processing challenge. The present study reports a novel and environmentally beneficial approach for homogeneous dispersion of MWCNT in PEEK by using ionic liquid (IL) 1-ethyl-3-methylimidazolium hydrogen sulfate ([EMIM][HSO₄]). Neat PEEK, PEEK-MWCNTs (using conventional organic solvent dimethylformamide), and PEEK-MWCNTs-IL (using [EMIM][HSO₄]) nanocomposites were fabricated via melt-compounding and compression molding techniques. The fabricated composites were characterized for morphological, thermal, and mechanical properties and compared to those of neat PEEK and PEEK-MWCNTs. Ionic liquid provoked proficient dispersion of the MWCNTs in PEEK, as confirmed by FESEM and optical micrographs. The thermal stability of PEEK-MWCNTs-IL composite was significantly superior to that of the neat PEEK and PEEK-MWCNTs. Analysis of tensile strength and nanoindentation depicted that the modulus of elasticity of PEEK-MWNCTs-IL was significantly increased by 76% as compared to that of neat PEEK. We believe that the present work could provide a new and green platform for the manufacturing of PEEK nanocomposites with enhanced dispersion of nanofillers for biomedical applications.