Phase-error-free quadrature sampling technique in the ultrasonic B-scan imaging system and its application to the synthetic focusing system

The quadrature sampling technique as a means of detecting the envelope of RF waveform in the baseband is well known. If this technique is applied to a focused ultrasound imaging system using an array transducer, whether it is a synthetic or nonsynthetic focusing system, unwanted phase terms appear in the expressions of the inphase and quadrature components of the baseband signal when an appropriate delay time is introduced to each channel signal for the purpose of focusing. The expressions of the inphase and quadrature components from the point of focusing are derived and analyzed in detail, and a scheme to eliminate the unwanted phase terms is proposed. The resulting phase-error-free quadrature sampling technique is applied to the synthetic focusing system; a system block diagram together with the simulation and experimental results are presented.     

Preparation of bao-pbo-nd2o3-tio2 powders by hydrothermal synthesis

Homogeneous and nano-sized BPNT [(Ba_1-xPb_x)Nd₂Ti₅O₁₄] powders were prepared under various hydrothermal conditions. Crystallinity and homogeneity of the synthetic powders were investigated. The microwave dielectric properties of the filters prepared with hydrothermal powders were compared with those of the filters prepared with conventional powders. The microwave dielectric properties of the filter prepared with the hydrothermal powders were also better than those of the filter manufactured with the conventional powders. The dielectric constant, quality constant and temperature coefficient of resonance frequency of hydrothermally prepared filter under optimum condition and measured at 3.5 GHz around were about 93, 6067 and 0 ppm/°C, respectively.     

Removal of paraquat in aqueous suspension of TiO<Subscript>2</Subscript> in an immersed UV photoreactor

Experiments were performed to investigate the effect of operating parameters on the photodegradation efficiency of paraquat in a TiO₂-suspended photoreactor with immersed UV lamps. TiO₂ particles were prepared by a hydrothermal method. The removal rate of paraquat in the reactor was 0.54 mg/l/h with only air-sparging. The removal rate in 24 h with both the UV radiation and air-sparging was 50% higher than that with only the UV radiation. Variations of the paraquat concentration at the UV intensities of 4 and 8 W/m₂ decreased slowly with time, but that at 12 W/m₂ decreased more rapidly. The removal efficiency at the air-sparging flow rate of 1 //min increased as a UV light intensity increased. pH value in the reactor at the UV intensity of 12 W/m₂ decreased with time until 12 h and then increased with time over 12 h.     

Enhanced electrochemical properties of SnO2 anode by AlPO4 coating

A SnO₂ anode material undergoes severe capacity loss, which is mainly associated with cracking/crumbling of the material by the large volume change between the Li_xSn and Sn phases, and the intensive reactions with the electrolyte solution. However, AlPO₄ nanoparticle coating showed drastically improved electrochemical properties with decreased surface cracks. The AlPO₄-coated SnO₂ exhibited a capacity of 781 mAh/g, approaching its theoretical capacity at the first cycle, with 44% capacity retention after 15 cycles between 2.5 and 0 V at a relatively high C rate of 105 mA/g. In contrast, the bare SnO₂ showed an initial capacity of 680 mAh/g, with only 8% capacity retention after 15 cycles.     

Sol-Gel Processing and Pyroelectric Properties of Highly Oriented Pb(Mg,Zn)1/3Nb2/3O3 Thin Films

Thin films of Pb(Mg,Zn)_1/3Nb_2/3O₃ (PMZN) were fabricated by spin casting the partially hydrolyzed Pb-Mg-Zn-Nb-O complex alkoxide sols on (111)Pt-coated MgO (100) planes. A strong preferential orientation of (100) perovskite was observed in the thin film derived from the sol exhibiting pseudoplastic behavior. A small-angle X-ray scattering experiment in the Porod region was performed to correlate the observed preferential orientation with the network structure of precursor in the PMZN sol. It was shown that weakly branched precursor systems led to highly oriented perovskite grains after thin-film formation. The highly (100) oriented PMZN film exhibited a larger pyroelectric coefficient (>2 μC/(cm²-K)) and pyroelectric figure-of-merit ( F _D > 4 × 10^1–4 Pa^−1/2) than the PMZN thin film having randomly oriented grains.     

Material properties and growth control of undoped and Sn-doped In2O3 thin films prepared by using ion beam technologies

Undoped (IO) and Sn-doped In₂O₃ (ITO) films have been deposited on glass and polymer substrates by an advanced ion beam technologies including ion-assisted deposition (IAD), hybrid ion beam, ion beam sputter deposition (IBSD), and ion-assisted reaction (IAR). Physical and chemical properties of the oxide films and adhesion between films and substrates were improved significantly by these technologies. By using the IAD method, non-stoichiometry and microstructure of the films were controlled by changing assisted oxygen ion energy and arrival ratio of assisted oxygen ion to evaporated atoms. Relationships between structural and electrical properties in ITO films on glass substrates were intensively investigated by using the IBSD method with changing ion energy, reactive gas environment, and substrate temperature. Smooth-surface ITO films (R_rms ≤ 1 nm and R_p-v ≤ 10 nm) for organic light-emitting diodes were developed with a combination of deposition conditions with controlling microstructure of a seed layer on glass. IAR surface treatment enormously enhanced the adhesion of oxide films to polymer substrate. The different dependence of IO and ITO films' properties on the experimental parameters, such as ion energy and oxygen gas environment, will be intensively discussed.     

Enhanced soft-handoff scheme for real-time streaming services in intelligent transportation systems based on CDMA

Code division multiple access (CDMA)-based radio-on-fiber road-vehicle communication systems were proposed to support real-time streaming services in intelligent transportation systems (ITSs). Soft handoff should be provided for real-time streaming services because these services are required to guarantee real-time property and quality of service (QoS). However, soft handoff of real-time streaming services causes the shortage of resource in view of the system. In this paper, the double-adjustment soft-handoff (DASH) scheme is proposed to support seamless service regardless of the shortage of resource and maximize the resource efficiency when real-time streaming services are served in CDMA-based ITSs. The DASH scheme adjusts the data rate of a call when it starts and finishes soft handoff. The performance of the DASH scheme is evaluated by analytical and simulation methods. Performances are evaluated with respect to the blocking probability, the handoff failure probability, and the carried traffic. Numerical results show that the proposed scheme can give relative good maintenance of calls and good throughput.     

Improvement in the volume efficiency of multilayered ceramic capacitors (MLCCs)

An attempt was made to improve the conventional lamination process in the multilayered ceramic capacitors (MLCCs) fabrication by adapting a solvent treatment on the BaTiO₃ green sheets. During the lamination process, additional particle rearrangement in the BaTiO₃ green block was stimulated by solvent treatment. This rearrangement resulted in a more compact structure of the BaTiO₃ green sheets compared to that obtained through the conventional lamination process. The overall thickness of BaTiO₃/Ni/BaTiO₃ laminates was also reduced after solvent treatment. It is suggested that miniaturization in the fabrication of MLCCs can be improved by adapting a solvent treatment during the lamination process.     

Nanostructural and optical features of nc-Si:H films prepared by nickel-induced crystallization

A 30-nm-thick Ni layer was deposited on top of the nc-Si:H (hydrogenated nanocrystalline Si) films by rf-magnetron sputter, and then heat-treatments were carried out at temperatures of 350–500^∘C. Si nanocrystallites were formed in the Ni/nc-Si:H bilayer films during the post-deposition heat-treatments. The intensity of the photoluminescence spectra of the post-deposition heat-treated films gradually increased at wavelengths of ∼420 as well as ∼580 nm with raising the annealing temperature from 350 to 500^∘C. It is highly likely that the increase of the photoluminescence intensity is caused by the increase in the total volume of the nanocrystallites in the films. It was found that the nickel-induced crystallization processing enhanced the formation of Si cystallites with the size of ∼2 and ∼5 nm in the films.