Effect of Hot Band Annealing on Magnetic Properties in 3% Si Grain‐oriented Electrical Steels

Hot band annealing is known to be a prerequisite for good magnetic properties irrespective of manufacturing methods in grain‐oriented Fe‐3 wt.% Si electrical steels. In this study, the effects of hot band annealing on magnetic properties were investigated in 3% grain‐oriented electrical steels of low soluble AI contents and one‐stage cold rolling. Microstructure and precipitate distribution were compared with hot band annealing conditions. Secondary recrystallization behaviour with hot band annealing condition was also discussed.     

Second-order asymmetric BAM design with a maximal basin of attraction

Bidirectional associative memory (BAM) generalizes the associative memory (AM) to be capable of performing two-way recalling of pattern pairs. Asymmetric bidirectional associative memory (ABAM) is a variant of BAM relaxed with connection weight symmetry restriction and enjoys a much better performance than a conventional BAM structure. Higher-order associative memories (HOAMs) are reputed for their higher memory capacity than the first-order counterparts. The paper concerns the design of a second-order asymmetric bidirectional associative memory (SOABAM) with a maximal basin of attraction, whose extension to a HOABAM is possible and straightforward. First, a necessary and sufficient condition is derived for the connection weight matrix of SOABAM that can guarantee the recall of all prototype pattern pairs. A local training rule which is adaptive in the learning step size is formulated. Then derived is a theorem, designing a SOABAM further enlarging the quantities required to meet the complete recall theorem will enhance the capability of evolving a noisy pattern to converge to its association pattern vector without error. Based on this theorem, our algorithm is also modified to ensure each training pattern is stored with a basin of attraction as large as possible.     

Self-balanced navigation-grade capacitive microaccelerometers using branched finger electrodes and their performance for varying sense voltage and pressure

Presents a navigation-grade capacitive microaccelerometer, whose low-noise high-resolution detection capability is achieved by a new electrode design based on a high-amplitude anti-phase sense voltage. We reduce the mechanical noise of the microaccelerometer to the level of 5.5 /spl mu/g//spl radic/Hz by increasing the proof-mass based on deep RIE process of an SOI wafer. We reduce the electrical noise as low as 0.6 /spl mu/g//spl radic/Hz by using an anti-phase high-amplitude square-wave sense voltage of 19 V. The nonlinearity problem caused by the high-amplitude sense voltage is solved by a new electrode design of branched finger type. Combined use of the branched finger electrode and high-amplitude sense voltage generates self force-balancing effects, resulting in an 140% increase of the bandwidth from 726Hz to 1734 Hz. For a fixed sense voltage of 10 V, the total noise is measured as 2.6 /spl mu/g//spl radic/Hz at the air pressure of 3.9torr, which is the 51% of the total noise of 5.1 /spl mu/g//spl radic/Hz at the atmospheric pressure.     

Complete and Rapid Regrasp Planning with Look-up Table

A pick-and-place operation in a 3-dimensional environment is a basic operation for humans and multi-purpose manipulators. However, there may be a difficult problem for such manipulators. Especially, if the object cannot be moved with a single grasp, regrasping, which can be a time-consuming process, should be carried out. Regrasping, given initial and final poses of the target object, is a construction of sequential transition of object poses that are compatible with two poses in the point of grasp configuration. This paper presents a novel approach for solving the regrasp problem. The approach consists of a preprocessing and a planning stage. Preprocessing, which is done only once for a given robot, generates a look-up table which has information on kinematically feasible task space of the end-effector throughout the entire workspace. Then, using this table, the planning automatically determines a possible intermediate location, pose and regrasp sequence leading from the pick-up to put-down grasp. With a redundant robot, it is shown experimentally that the presented method is complete in the entire workspace and can be implemented in real-time applications due to rapid regrasp planning time. The regrasp planner was combined with an existing path.     

Performance evaluation of soft handoff for multimedia services in intelligent transportation systems based on CDMA

To support multimedia services in intelligent transportation systems (ITS), CDMA based radio-on-fiber road-vehicle communication systems were proposed. Soft handoff should be provided for multimedia services because these services are required to guarantee real-time property and quality of service (QoS). The performance evaluation of soft handoff is important in view of system management such as determination of optimal resource allocation, cell configuration, and admission strategy. But, the performance evaluation of soft handoff when multimedia services are serviced has not been previously researched, even though there have been some previous works for voice-call service. In this paper, we develop a new analytical model of soft handoff when multimedia services are served in CDMA based ITS. We evaluate the performance of soft handoff scheme by analytical and simulational method. Blocking probability, handoff failure probability and carried traffic are obtained.     

Effects of surface treatment of field emitter arrays on electrical characteristics of active matrix cathode

The effects of a wet chemical surface treatment of molybdenum-tip (Mo-tip) emitters on the electrical characteristics of an active matrix cathode composed of hydrogenated amorphous silicon thin film transistors and Mo-tip emitters are described. X-Ray photoelectron spectroscopy measurements showed that the surface treatment removed MoO₃ from the surface of the e-beam evaporated Mo film. In addition, the surface roughness of the Mo film was increased as the result of the surface treatment. The surface-treated active matrix cathode showed stable emission characteristics and immunity from emitter failures during its operation. The response time of the active matrix cathode was decreased by the surface treatment of the Mo-tip emitters. A change in surface composition and surface roughness appear to be responsible for the enhancement of the active matrix cathode.     

Control of Molybdenum Emission by Sorbents: Equilibrium Analysis

Emissions from fossil fuel combustion containing various heavy metals such as molybdenum are of public concern due to their adverse effects on human health and the environment. In this study, thermodynamic analyses were applied to determine the potential of sorbent technology to control molybdenum emissions from combustion sources. The effectiveness of four sorbents (Ca, Fe, Mg and Na based) was assessed for a wide range of temperatures. The adverse effects of chlorine and sulfur were also examined. Ca and Na-based sorbents were identified to be effective.     

Spatial Variability in Soils: High Resolution Assessment with Electrical Needle Probe

The global response of a soil is affected by spatial as well as temporal scales. An electrical needle-size probe is developed to effectively assess one-dimensional spatial variability. The probe is designed for laboratory specimens (needle diameter 1.2–2.2 mm), and it can be scaled for field applications. Design considerations include the tip shape, insertion disturbance, electrochemical effects, corrosion, operating frequency, and electrical resonance. Two calibration methods are presented to determine local soil permittivity and resistivity from the measured complex impedance; the simplified calibration procedure is based on resistance measurements only. The local electrical parameters permit one to infer the soil porosity and the electrolyte conductivity. The attainable spatial resolution depends on the needle diameter; submillimetric resolution is typically achieved in laboratory applications. Reconstituted sand specimens and undisturbed clayey specimens are tested to explore the resolution potential of this probe. The electrical needle probe clearly detects the spatial variability that results from different specimen preparation methods in sands and soil layering from natural formation histories such as those in varved clays.     

Risk Assessment Methodology for Underground Construction Projects

This paper presents a risk assessment methodology for underground construction projects. A formalized procedure and associated tools were developed to assess and manage the risks involved in underground construction. The suggested risk assessment procedure is composed of four steps of identifying, analyzing, evaluating, and managing the risks inherent in construction projects. The main tool of the proposed risk assessment methodology is the risk analysis software. The risk analysis software is built upon an uncertainty model based on fuzzy concept. The fuzzy-based uncertainty model is designed to consider the uncertainty range that represents the degree of uncertainties involved in both (1) probabilistic parameter estimates and (2) subjective judgments. Other tools developed in this study include the survey sheets for collecting risk-related information and the detail check sheets for risk identification and analysis. The paper finally discusses a detailed case study of the developed risk assessment methodology performed for a subway construction project in Korea.     

Higher order eigensensitivity analysis of damped systems with repeated eigenvalues

A simplified method for the computation of first-, second- and higher-order derivatives of eigenvalues and eigenvectors associated with repeated eigenvalues is presented. Adjacent eigenvectors and orthonormal conditions are used to compose an algebraic equation. The algebraic equation which is developed can be used to compute derivatives of eigenvalues and eigenvectors simultaneously. Since the coefficient matrix in the proposed algebraic equation is non-singular, symmetric and based on N-space, it is numerically stable and very efficient compared to previous methods. To verify the efficiency of the proposed method, the finite element model of the cantilever beam and a mechanical system in the case of a non-proportionally damped system are considered.