Effective identification of dominant fully absorbing sets for Raptor-like LDPC codes

The error-rate floor of low-density parity-check (LDPC) codes is attributed to the trapping sets of their Tanner graphs. Among them, fully absorbing sets dominantly affect the error-rate performance, especially for short blocklengths. Efficient methods to identify the dominant trapping sets of LDPC codes were thoroughly researched as exhaustively searching them is NP-hard. However, the existing methods are ineffective for Raptor-like LDPC codes, which have many types of trapping sets. An effective method to identify dominant fully absorbing sets of Raptor-like LDPC codes is proposed. The search space of the proposed algorithm is optimized into the Tanner subgraphs of the codes to afford time-efficiency and search-effectiveness. For 5G New Radio (NR) base graph (BG) 2 LDPC codes for short blocklengths, the proposed algorithm finds more dominant fully absorbing sets within one seventh of the computation time of the existing search algorithm, and its search-effectiveness is verified using importance sampling. The proposed method is also applied to 5G NR BG1 LDPC code and Advanced Television Systems Committee 3.0 type A LDPC code for large blocklengths.     

Targeting T cells against brain tumors with a bispecific ligand-antibody conjugate

Haemophilus influenzae is a bacterium of medical interest of which the entire genome has been sequenced. The proteome of the microorganism has been analyzed by two-dimensional gel electrophoresis, during which immobilized pH 3-10 gradient strips were used and approximately 300 proteins were identified. In order to detect additional, basic proteins, we analyzed the soluble protein fraction of H. influenzae and the proteins of fractions collected from affinity chromatography on heparin, by two-dimensional gel electrophoresis, using for the first-dimensional separation immobilized pH gradient strips comprising the pH region of 6-11. The protein spots were analyzed by matrix-assisted laser desorption ionization-mass spectrometry. One hundred and two proteins were identified, of which 58 were identified for the first time. A large percentage of the basic proteins represent nucleic acid binding and, in particular, ribosomal proteins. The locations of the identified basic proteins of H. influenzae are indicated in a two-dimensional map.     

Improvements of spreading codes utilisation efficiency forintegrated multimedia services in CDMA network

A wireless MAC protocol for the CDMA network is proposed which provides the various bit rates required to support the integrated multimedia services. The proposed method improves the spreading codes utilisation efficiency by sharing limited spreading codes among all mobile terminals     

Fabrication of a Continuously Oriented Porous Al2O3 Body and Its In Vitro Study

Continuously oriented porous Al₂O₃ bodies were fabricated by a multi-pass extrusion process using C powders and ethylene vinyl acetate as an agent for pore forming and as a binder, respectively. The main pore size can be easily controlled by increasing the number of extrusion passes. The edges of the pore frame showed a rough surface having many fine pores about 0.2–1 μm in size. In the continuously porous Al₂O₃ bodies having 150 μm pore size, the values of the relative density and bending strength were about 63% and 90 MPa, respectively. These values were higher than those of an Al₂O₃ porous body made by a common process. From the in vitro study using human osteoblast-like MG-63 cells, it was confirmed that the cells grew well and adhered to the top surface and inside pores, as well as the outside wall of the continuously porous Al₂O₃ body. Without the directionality, the cells showed some spindle-shaped, three-dimensional, and network-type structures.     

Spectral analysis of malfunction mode in endmilling

For the investigation of the chatter modes, the power spectrum of the parametric time series model was adopted and analyzed at several mixed conditions of different revolution. This paper describes a methodology for an application of several time series such asAR (forward-backward, burg, least square, Yule Walker, geometric lattice, instrumental variable),ARX (least square, instrumental variable),ARMAX, ARMA, Box Jenkins, Output Error. To estimate the chatter mode using their spectral analysis their results were compared with one another. As a result, it was proven that several time series methods can be used for chatter mode estimation. Among them, theARX, ARMAX and instrumental variable methods (iv4) are more desirable and reliable than the other algorithm for the exact calculation of the chatter mode in endmilling. Among three cutting forces, the z direction cutting force,Fz, has more powerful characteristics of chatter occurring than the cutting forces,Fx andFy, in the sense that weak mode is calculated exactly and there is no shifted or pseudo mode in the estimated power spectra of endmilling forces.     

Zero-voltage and zero-current-switching full bridge PWM converterfor high-power applications

A novel zero-voltage and zero-current-switching (ZVZCS) full-bridge (FB) pulse-width modulated (PWM) converter is proposed. The new converter overcomes the limitations of the zero-voltage-switching (ZVS)-FB-PWM converter, such as high circulating energy, loss of duty cycle, and limited ZVS load range for the lagging-leg switches. By using the DC blocking capacitor and adding a saturable inductor, the primary current during the freewheeling period is reduced to zero, allowing the lagging-leg switches to be operated with zero-current-switching (ZCS). Meanwhile, the leading-leg switches are still operated with ZVS. The new converter is attractive for high-voltage (400-800 V), high-power (2-10 kW) applications where IGBTs are predominantly used as the power switches. The principle of operation, features, and design considerations of the new converter are described and verified on a 2-kW, 100-kHz, IGBT-based experimental circuit     

Kinetics of copper drift in PECVD dielectrics

We quantified the drift of Cu ions into various PECVD dielectrics by measuring shifts in capacitance-voltage behavior after subjecting Cu-gate MOS capacitors to bias-temperature stress. At a field of 1.0 MV/cm and temperature of 100°C, Cu ions drift readily into PECVD oxide with a projected accumulation of 2.7×10¹³ ions/cm ² after 10 years. However, in PECVD oxynitride, the projected accumulation under the same conditions is only 2.3×10¹⁰ ions/cm². These findings demonstrate the necessity of integrating drift barriers, such as PECVD oxynitride layers, in Cu interconnection systems to ensure threshold stability of parasitic field n-MOS devices     

Whole-body [18F]FDG PET in the management of metastatic brain tumours

BACKGROUND: To determine its roles in the diagnosis and the systemic evaluation of metastatic brain tumours, whole-body positron emission tomography (PET) using [18F]FDG was performed in 20 consecutive patients. METHODS: All patients were thought to be suffering or needing to be differentiated from metastatic brain tumours. Nine patients had multiple brain lesions; six were older and showed a rim-enhancing lesion with surrounding oedema; seven had homogeneously enhancing periventricular lesion(s) on computed tomography (CT) and/or magnetic resonance (MR) imaging, thought to be central nervous system lymphomas. Two patients had skull mass(es) and two patients had a solid mass suspected to be, respectively, a haemorrhagic metastasis and a metastatic malignant melanoma. All of them received whole-body [18F]FDG PET and conventional systemic work-up for metastasis in order to compare the results of the two methods. RESULTS: Metastatic brain tumours were diagnosed on whole-body [18F]FDG PET in eleven patients who had extracranial and intracranial hypermetabolic lesions. In nine of these, a conventional work-up also detected primary lesions which on whole-body [18F]FDG PET were seen to be hypermetabolic foci. Systemic lymph node metastases were detected by whole-body [18F]FDG PET only in two patients and histological diagnosis was possible by biopsy of lymph nodes rather than of brain lesions. In the remaining nine patients who had only intracranial hypermetabolic foci, histological diagnosis was made by craniotomy or stereotactic biopsy. It was confirmed that seven of nine patients were suffering from a primary brain tumour and two from metastatic carcinoma. None of the nine showed evidence of systemic cancer on conventional work-up. Histological diagnoses of the primary brain tumours were four cases of primary central nervous system lymphoma and one each of multifocal glioblastoma, Ewing's sarcoma, and cavernous angioma. Patients felt no discomfort during the whole-body [18F]FDG PET procedure and there were no complications. The false negative rate in [18F]FDG PET and in conventional work-up was 15.4% and 30.7% respectively. There were no false positives on either [18F]FDG PET or conventional work-up. CONCLUSION: It is suggested that whole-body [18F]FDG PET is a safe, reliable, and convenient method for the diagnosis and systemic evaluation of patients thought to be suffering or needing to be differentiated from a metastatic brain tumour.     

Electronic step down (220/110 V) transformer using a new quantumseries resonant converter

A novel quantum series resonant converter (QSRC) topology for a pure sinewave 60 Hz AC chopper is proposed. It has three bidirectional switches and operates at high switching frequency with low switching loss. Bidirectional power flow is possible, and the switches can operate in either zero current switching (ZCS) mode or zero voltage switching (ZVS) mode by slight modification. The QSRC is thought to be suitable for such a system with fixed voltage conversion ratio. The proposed converter is applied to an electronic 220/110 V transformer. Detailed analyses and experimental results for 1 kVA are presented