Explaining the Formation of Online News Startups in France and the United States: A Field Analysis

This article examines the differential formation of online news startups in Toulouse, France, and Seattle, United States. While Seattle is home to many startups, in Toulouse there have been just 4—and only 1 continues publishing. Drawing on Bourdieu's field theory, we argue that amount and types of capital held by journalists in the 2 cities varied as a result of differences in journalism's position in the field of power. These differences shaped the extent of startup formation in each city and structured journalists' capacities to convert their capital into the resources needed to form startups (e.g., funding, credentials, partnerships). These findings are positioned in relation to literatures on journalism innovation and comparative media.     

Sintering and Microwave Properties of Zirconium Tin Titanate Doped with Select Oxides

Zirconium tin titanate (ZST) is often used as a dielectric resonator for the fabrication of microwave devices. Pure compositions do not sinter easily by solid state sintering; therefore, sintering ZST requires sintering aids capable of creating defects that could improve diffusion processes and/or promote liquid phase sintering. The mechanisms by which the additives influence the microstructure and, consequently, the ZSTs dielectric properties are not very clear. The effects of ZnO, Bi₂O₃, and La₂O₃, on the stoichiometry and dielectric properties of ZST sintered at different temperatures were investigated in this study.     

Increases in nitrogen use efficiency decrease nitrous oxide emissions but can penalize yield in sugarcane

Nutrient Cycling in Agroecosystems - Nitrogen (N) fertilization strategies focused on increasing nitrogen use efficiency (NUE) and decreasing nitrous oxide (N2O) emissions are important for...     

Methodology for WEEE assessment in Algeria

Waste electrical and electronic equipment (WEEE) generated in emerging countries is increasing. This study presents a methodology to improve assessment and monitoring WEEE in Algeria. The proposed methodology is a two-step approach. The first step is the collection and collation of existing data from different national and international sources. In the second step, different assessment and forecasting methods are applied. Forecasting methods were selected from those models which provided minimum error indices. The paper considers also the availability and reliability of data in order to provide a future reliable assessment of WEEE in Algeria. The study revealed that the forecasting methods do not have a big influence on the results contrary to the inputs of the model.     

Gold nanoshell density variation with laser power for induced hyperthermia

The thermal profile effects of nanoshell density, laser power, and laser arrangement are presented for ideal cases of nanoshell-assisted photothermal therapy. A one-dimensional thermal model utilizing the P₁ approximation is used to simulate the penetration of laser radiation and subsequent heating of 1-cm slabs of nanoshell-embedded tissue exposed to a 633-nm collimated light source. It is shown that adding too many nanoshells or increasing power can cause overheating in the entry region while leaving the rear region heated only by conduction, producing an undesirable temperature differential. An opposing dual-laser approach is presented that mitigates this issue.     

Modelling diffusion and adsorption of As species in Fe/GAC adsorbent beds

BACKGROUND: Arsenic decontamination of drinking water by adsorption is a simple and robust operation. When designing packed bed adsorbers for arsenic, the main problems are the slow diffusion kinetics of As in microporous media and the lack of simple equations for predicting the performance of the equipment. Commercial iron‐doped granular activated carbon adsorbents (Fe/GAC) for groundwater arsenic abatement were studied in this work. Basic parameters for arsenate (As^V) adsorption were measured and their performance at larger scale was simulated with an approximate analytical model. RESULTS: In the 0–300 µg_As L^?1 range, the As^V adsorption isotherm on Fe/GAC was found to be approximately linear. Assuming Henry's law for adsorption and homogeneous surface diffusion with constant diffusivity for intrapellet mass transfer, an approximate model for flow and adsorption of arsenate inside packed bed adsorbers was developed, and reduced to an analytic compact solution using the quasi‐lognormal distribution (Q‐LND) approximation. The use of this model with fitted and reported parameters enabled the approximate simulation of industrial adsorbers and home point‐of‐use filters. Results show that industrial adsorbers meet the breakthrough condition with incomplete utilization of the adsorbent unless convenient process configurations are used. In point‐of‐use systems with short residence times intraparticle diffusion would drastically reduce the adsorbent performance. CONCLUSION: Assuming linear adsorption of As^V over Fe/GAC, an analytical approximate solution for flow and adsorption in packed beds can be obtained. The model seems to represent correctly the main features of industrial and home filters, however, more experimental data is necessary for scale‐up purposes. Copyright © 2011 Society of Chemical Industry     

Neural approach for temperature‐dependent modeling of GaN HEMTs

Gallium nitride high electron‐mobility transistors have gained much interest for high‐power and high‐temperature applications at high frequencies. Therefore, there is a need to have the dependence on the temperature included in their models. To meet this challenge, the present study presents a neural approach for extracting a multi‐bias model of a gallium nitride high electron‐mobility transistors including the dependence on the ambient temperature. Accuracy of the developed model is verified by comparing modeling results with measurements. Copyright © 2014 John Wiley & Sons, Ltd.     

Polyurethanes based on 2,2‐Dinitropropane‐1,3‐diol and 2,2‐bis(azidomethyl)propane‐1,3‐diol as potential energetic binders

On the base of 2,2‐bis(azidomethyl)propane‐1,3‐diol (BAMP) and 2,2‐dinitropropane‐1,3‐diol (DNPD) four different polyurethanes were synthesized in a polyaddition reaction using hexamethylene diisocyanate (HMDI) and diisocyanato ethane (DIE). The obtained prepolymers were mainly characterized using vibrational spectroscopy (IR) and elemental analysis. For determination of low and high temperature behavior, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used. Investigations concerning friction and impact sensitivities were carried out using a BAM drop hammer and friction tester. The energetic properties of the polymers were determined using bomb calorimetric measurements and calculated with the EXPLO5 V6.02 computer code. The obtained values were compared with the glycidyl azide polymer (GAP). The compounds turned out to be insensitive toward friction (>360 N) and less sensitive toward impact (40 J). The good physical stabilities, along with their sufficient thermal stability (170–210 °C) and moderate energetic properties renders these polymers into potential compounds for applications as binders in energetic formul;ations. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43991.