Motion artifact reduction in photoplethysmography using independent component analysis

Removing the motion artifacts from measured photoplethysmography (PPG) signals is one of the important issues to be tackled for the accurate measurement of arterial oxygen saturation during movement. In this paper, the motion artifacts were reduced by exploiting the quasi-periodicity of the PPG signal and the independence between the PPG and the motion artifact signals. The combination of independent component analysis and block interleaving with low-pass filtering can reduce the motion artifacts under the condition of general dual-wavelength measurement. Experiments with synthetic and real data were performed to demonstrate the efficacy of the proposed algorithm.     

Reflective SOA-Based Bidirectional WDM-PON Sharing Optical Source for Up/Downlink Data and Broadcasting Transmission

We proposed and experimentally demonstrated the reflective semiconductor optical amplifier (RSOA)-based wavelength-division-multiplexed passive optical network (WDM-PON) scheme where not only up/downlink data services but also broadcasting service could be provided using a single optical source. In the proposed scheme, the digital signal and subcarrier multiplexing (SCM) signal for downstream were simultaneously modulated by a single distributed feedback laser diode and RSOA in optical network unit remodulated downstream source as an upstream. Without performance deterioration of digital signals both in up- and downstream, the proposed WDM-PON scheme can stably offer the SCM signal for broadcasting service. In the experiment, 1-Gb/s digital signals both for up- and downstream and 20-Mb/s SCM signal at 2.2 GHz for broadcasting were demonstrated in 10-km bidirectional link     

Low-Complexity Symbol Detector for MIMO-OFDM-Based Wireless LANs

In this brief, a low-complexity hardware architecture for multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) symbol detectors with two transmit and two receive antennas is proposed. The detectors support two MIMO-OFDM schemes of space-frequency block coded OFDM and space-division multiplexing OFDM in order to achieve higher performance and throughput. However, symbol detection processes for these two schemes have high computational complexity, which is a burden to hardware implementation of MIMO-OFDM symbol detectors. In order to reduce complexity, the proposed symbol detector is designed with shared architecture, where similar functional blocks are merged and share the hardware resources, and results in the reduction of logic gates by 34% over a conventional architecture employing two individual detectors     

A Fast Intra Skip Detection Algorithm for H.264/AVC Video Encoding

A fast intra skip detection algorithm based on the rate‐distortion (RD) cost for an inter frame (P‐slices) is proposed for H.264/AVC video encoding. In the H.264/AVC coding standard, a robust rate‐distortion optimization technique is used to select the best coding mode and reference frame for each macroblock (MB). There are three types of intra predictions according to profiles. These are 16×16 and 4×4 intra predictions for luminance and an 8×8 intra prediction for chroma. For the high profile, an 8×8 intra prediction has been added for luminance. The 4×4 prediction mode has 9 prediction directions with 4 directions for 16×16 and 8×8 luma, and 8×8 chrominance. In addition to the inter mode search procedure, an intra mode search causes a significant increase in the complexity and computational load for an inter frame. To reduce the computational load of the intra mode search at the inter frame, the RD costs of the neighborhood MBs for the current MB are used and we propose an adaptive thresholding scheme for the intra skip extraction. We verified the performance of the proposed scheme through comparative analysis of experimental results using joint model reference software. The overall encoding time was reduced up to 32% for the IPPP sequence type and 35% for the IBBPBBP sequence type.     

Selective wet etching of p-GaN for efficient GaN-based light-emitting diodes

The selective wet etching of a p-GaN layer by using a solution of KOH in ethylene glycol (KE) was studied to enhance the optical and electrical performance of the GaN-based light-emitting diodes (LEDs). The surface of the p-GaN, which was selectively etched in the KE solution, showed hexagonal-shaped etch pits. The light-output power of etched LEDs was improved by 29.4% compared to that of the nonetched LED. This improvement was attributed to the increase in the probability of photons to escape due to the increased surface area of textured surface and the reduction in contact resistance of the ohmic layer resulting from the increased contact area and hole concentration on the textured p-GaN. The reverse leakage current of the LED was also greatly decreased due to the surface passivation and the removal of defective regions from the p-GaN.     

A novel hidden station detection mechanism in IEEE 802.11 WLAN

The popular IEEE 802.11 wireless local area network (WLAN) is based on a carrier sense multiple access with collision avoidance (CSMA/CA), where a station listens to the medium before transmission in order to avoid collision. If there exist stations which can not hear each other, i.e., hidden stations, the potential collision probability increases, thus dramatically degrading the network throughput. The RTS/CTS (request-to-send/clear-to-send) frame exchange is a solution for the hidden station problem, but the RTS/CTS exchange itself consumes the network resources by transmitting the control frames. In order to maximize the network throughput, we need to use the RTS/CTS exchange adaptively only when hidden stations exist in the network. In this letter, a simple but very effective hidden station detection mechanism is proposed. Once a station detects the hidden stations via the proposed detection mechanism, it can trigger the usage of the RTS/CTS exchange. The simulation results demonstrate that the proposed mechanism can provide the maximum system throughput performance.     

Development of intracranial brain-computer interface system using non-motor brain area for series of motor functions

An intracranial brain-computer interface (BCI) system using the neuronal activity of a non-motor brain area to fulfil a series of motor functions has been developed. The presented BCI system encodes a series of motor functions into a small number of neuronal units of the primary somatosensory cortex of a rat and generates real-time command signals to control a machine according to the animal's motor intentions. The results of this study demonstrate the practical usability of the BCI system using a non-motor brain area in the field of rehabilitation.     

A 20-GHz phase-locked loop for 40-gb/s serializing transmitter in 0.13-/spl mu/m CMOS

A 20-GHz phase-locked loop with 4.9 ps/sub pp//0.65 ps/sub rms/ jitter and -113.5 dBc/Hz phase noise at 10-MHz offset is presented. A half-duty sampled-feedforward loop filter that simply replaces the resistor with a switch and an inverter suppresses the reference spur down to -44.0 dBc. A design iteration procedure is outlined that minimizes the phase noise of a negative-g/sub m/ oscillator with a coupled microstrip resonator. Static frequency dividers made of pulsed latches operate faster than those made of flip-flops and achieve near 2:1 frequency range. The phase-locked loop fabricated in a 0.13-/spl mu/m CMOS operates from 17.6 to 19.4GHz and dissipates 480mW.     

Joint data rate and power allocation for lifetime maximization in interference limited ad hoc networks

In this paper, we consider the following problem in the wireless ad hoc network: Given a set of paths between source and destination, how to divide the data flow among the paths and how to control the transmission rates, times, and powers of the individual links in order to maximize the operation time of the worst network node. If all nodes are of equal importance, the operation time of the worst node is also the lifetime of the network. By solving the problem, our aim is to investigate how the network lifetime is affected by link conditions such as the maximum transmission power of a node and the peak data rate of a link. For the purpose, we start from a system model that incorporates the carrier to interference ratio (CIR) into a variable data rate of a link. With this, we can develop an iterative algorithm for the lifetime maximization, which resembles to the distributed power control in cellular systems. Numerical examples on the iterative algorithm are included to illustrate the network lifetime as a function of the maximum transmission power and the peak data rate.     

Near‐Optimum Blind Decision Feedback Equalization for ATSC Digital Television Receivers

This paper presents a near‐optimum blind decision feedback equalizer (DFE) for the receivers of Advanced Television Systems Committee (ATSC) digital television. By adopting a modified trellis decoder (MTD) with a trace‐ back depth of 1 for the decision device in the DFE, we obtain a hardware‐efficient, blind DFE approaching the performance of an optimum DFE which has no error propagation. In the MTD, the absolute distance is used rather than the squared Euclidean distance for the computation of the branch metrics. This results in a reduction of the computational complexity over the original trellis decoding scheme. Compared to the conventional slicer, the MTD shows an outstanding performance improvement in decision error probability and is comparable to the original trellis decoder using the Euclidean distance. Reducing error propagation by use of the MTD in the DFE leads to the improvement of convergence performance in terms of convergence speed and residual error. Simulation results show that the proposed blind DFE performs much better than the blind DFE with the slicer, and the difference is prominent at the trellis decoder following the blind DFE.