A Liquid Metal Based Multimodal Sensor and Haptic Feedback Device for Thermal and Tactile Sensation Generation in Virtual Reality

Virtual reality (VR) has been widely used for training, gaming, and entertainment, and the value of VR is continually increasing as a contact-free technology. For an immersive VR experience, measuring finger movements and providing appropriate feedback to the hand are as important as visual information, given the necessity of the hands for activities in daily life. Thus, a hand-worn VR device with motion sensors and haptic feedback is desirable. In this paper, a multimodal sensing and feedback glove is developed with soft, stretchable, lightweight, and compact sensor and heater sheets manufactured by direct ink writing (DIW) of liquid metal, eutectic gallium-indium (eGaIn). In the sensor sheet, ten sensors and three vibrators are embedded to measure finger movements and provide vibro-haptic feedback. The other heater sheet provides thermo-haptic sensation in accurate and rapid manner via model-based feedback control even under stretched conditions. The multimodal sensing and feedback glove allows users to feel the contact status and discriminate materials with different temperature. Performance of the proposed multimodal glove is verified under VR environments including touching and pushing two blocks of different materials and grabbing a heated metal ball submerged in hot water.     

Low-Complexity Symbol Detector for MIMO-OFDM-Based Wireless LANs

In this brief, a low-complexity hardware architecture for multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) symbol detectors with two transmit and two receive antennas is proposed. The detectors support two MIMO-OFDM schemes of space-frequency block coded OFDM and space-division multiplexing OFDM in order to achieve higher performance and throughput. However, symbol detection processes for these two schemes have high computational complexity, which is a burden to hardware implementation of MIMO-OFDM symbol detectors. In order to reduce complexity, the proposed symbol detector is designed with shared architecture, where similar functional blocks are merged and share the hardware resources, and results in the reduction of logic gates by 34% over a conventional architecture employing two individual detectors     

Systematic Study of Widely Applicable N‐Doping Strategy for High‐Performance Solution‐Processed Field‐Effect Transistors

A specific design for solution‐processed doping of active semiconducting materials would be a powerful strategy in order to improve device performance in flexible and/or printed electronics. Tetrabutylammonium fluoride and tetrabutylammonium hydroxide contain Lewis base anions, F^? and OH^?, respectively, which are considered as organic dopants for efficient and cost‐effective n‐doping processes both in n‐type organic and nanocarbon‐based semiconductors, such as poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)] (P(NDI2OD‐T2)) and selectively dispersed semiconducting single‐walled carbon nanotubes by π‐conjugated polymers. The dramatic enhancement of electron transport properties in field‐effect transistors is confirmed by the effective electron transfer from the dopants to the semiconductors as well as controllable onset and threshold voltages, convertible charge‐transport polarity, and simultaneously showing excellent device stabilities under ambient air and bias stress conditions. This simple solution‐processed chemical doping approach could facilitate the understanding of both intrinsic and extrinsic charge transport characteristics in organic semiconductors and nanocarbon‐based materials, and is thus widely applicable for developing high‐performance organic and printed electronics and optoelectronics devices.     

Dissolution Behaviors and Applications of Silicon Oxides and Nitrides in Transient Electronics

Silicon oxides and nitrides are key materials for dielectrics and encapsulation layers in a class of silicon‐based high performance electronics that has ability to completely dissolve in a controlled fashion with programmable rates, when submerged in bio‐fluids and/or relevant solutions. This type of technology, referred to as “transient electronics”, has potential applications in biomedical implants, environmental sensors, and other envisioned areas. The results presented here provide comprehensive studies of transient behaviors of thin films of silicon oxides and nitrides in diverse aqueous solutions at different pH scales and temperatures. The kinetics of hydrolysis of these materials depends not only on pH levels/ion concentrations of solutions and temperatures, but also on the morphology and chemistry of the films, as determined by the deposition methods and conditions. Encapsulation strategies with a combination of layers demonstrate enhancement of the lifetime of transient electronic devices, by reducing water/vapor permeation through the defects.     

Chemically Recyclable Conjugated Polymer and One-Shot Preparation of Thermally Stable and Efficient Bulk-Heterojunction from Recycled Monomer

Recyclable conjugated polymers are important for realizing eco-friendly electronics with advantages of solution processability and flexibility. A recyclable conjugated polymer, PY-TIP is developed, of which a key monomer is successfully extracted via a mild depolymerization process and is reused for the synthesis of novel conjugated polymers. One-shot preparation of polymer acceptor and its bulk-heterojunction (BHJ) is demonstrated from the recycled monomer, Y5-TA, for the first time and the resulting BHJ film shows optimal nanoscale morphology for efficient charge generation and transport. As a result, the solar cells prepared using the BHJ film show a higher efficiency of 13.08% and much improved thermal and mechanical stability compared with those based on the small molecular acceptor. These results are important in that the various polymers can be prepared from the recycled monomer in a solid state without organic solvents and purification step and this strategy is effective for improving the thermal and mechanical stability of the BHJ film as well as achieving high photovoltaic performance. PY-TIP is exemplary in that it can reproduce its monomer which can be used to synthesize conjugated polymers with novel chemical structures and physical properties. This work provides a design guideline for developing recyclable conjugated polymers with dynamic covalent bonds.     

Materials and Wireless Microfluidic Systems for Electronics Capable of Chemical Dissolution on Demand

Electronics that are capable of destroying themselves, on demand and in a harmless way, might provide the ultimate form of data security. This paper presents materials and device architectures for triggered destruction of conventional microelectronic systems by means of microfluidic chemical etching of the constituent materials, including silicon, silicon dioxide, and metals (e.g., aluminum). Demonstrations in an array of home‐built metal‐oxide‐semiconductor field‐effect transistors that exploit ultrathin sheets of monocrystalline silicon and in radio‐frequency identification devices illustrate the utility of the approaches.     

Optimal resource allocation for energy efficiency in coordinated multicell OFDMA networks

Because energy efficiency (EE) is inevitable in future wireless cellular networks, in this paper, we focus on improving the number of bits delivered to users for each unit energy consumption in the downlink of orthogonal frequency‐division multiple access cellular networks with base stations (BSs) coordination. Specifically, each BS shares the channel qualities of users with others and jointly choose the set of co‐channel users and the transmit power allocated to maximize the EE of the system subject to the transmit power ceiling of each BS and minimum required data rate. We formulate the problem as a nonlinear fractional optimization problem, using nonlinear fractional programming, the original hard‐to‐solve problem is transferred to a new one that has the same optimal solution and is easier to solve, this enables two iterative algorithms that achieve nearly the same maximum EE. Numerical results are provided to show the convergence and superiority of the two proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Treefrog Toe Pad‐Inspired Micropatterning for High‐Power Triboelectric Nanogenerator

Inspired by treefrog's toe pads that show superior frictional properties, herein, an industrially compatible approach is reported to make an efficient dielectric tribosurface design using customizable nonclose‐packed microbead arrays, mimicking the friction pads of treefrogs, in order to significantly enhance electrification performance and reliability of triboelectric nanogenerator (TENG). The approach involves using an engineering polymer to prepare a highly ordered large‐area concave film, and subsequently the molding of a convex patterned triboreplica in which the concave film is exploited as a reusable master mold. A nature‐inspired TENG based on the patterned polydimethylsiloxane (PDMS) paired with flat aluminum (Al) can generate a relatively high power density of 8.1 W m^?2 even if a very small force of ≈6.5 N is applied. Moreover, the convex patterned PDMS‐based TENG possesses exceptional durability and reliability over 25 000 cycles of contact–separation. Considering the significant improvements in power generation of TENG; particularly at very small force, together with cost‐effectiveness and possibility of mass production, the present methodology may pave the way for large‐scale blue energy harvesting and commercialization of TENGs for many practical applications.     

Analysis of Single‐RF MIMO Receiver with Beam‐Switching Antenna

This paper proposes a single‐RF MIMO receiver that adopts a beam‐switching antenna (BSA) instead of a conventional array antenna. The beauty of the proposed single‐RF MIMO receiver with BSA is that it can be deployed in a very small physical space while achieving a full spatial multiplexing gain. Our analysis has revealed that the use of a BSA inevitably results in the spectrum spreading effect at the RF output, which in turn causes an SNR decrease and adjacent channel interference (ACI). Two novel receiver techniques are proposed to mitigate the issues of redundant sub‐band suppression and ACI avoidance. Numerical analysis results verify the performance improvement from the proposed receiver techniques.     

A Review of Three‐Dimensional Resistive Switching Cross‐Bar Array Memories from the Integration and Materials Property Points of View

Issues in the circuitry, integration, and material properties of the two‐dimensional (2D) and three‐dimensional (3D) crossbar array (CBA)‐type resistance switching memories are described. Two important quantitative guidelines for the memory integration are provided with respect to the required numbers of signal wires and sneak current paths. The advantage of 3D CBAs over 2D CBAs (i.e., the decrease in effect memory cell size) can be exploited only under certain limited conditions due to the increased area and layout complexity of the periphery circuits. The sneak current problem can be mitigated by the adoption of different voltage application schemes and various selection devices. These have critical correlations, however, and depend on the involved types of resistance switching memory. The problem is quantitatively dealt with using the generalized equation for the overall resistance of the parasitic current paths. Atomic layer deposition is discussed in detail as the most feasible fabrication process of 3D CBAs because it can provide the device with the necessary conformality and atomic‐level accuracy in thickness control. Other subsidiary issues related to the line resistance, maximum available current, and fabrication technologies are also reviewed. Finally, a summary and outlook on various other applications of 3D CBAs are provided.