A resource-efficient and scalable wireless mesh routing protocol

By binding logic addresses to the network topology, routing can be carried out without going through route discovery. This eliminates the initial route discovery latency, saves storage space otherwise needed for routing table, and reduces the communication overhead and energy consumption. In this paper, an adaptive block addressing (ABA) scheme is first introduced for logic address assignment as well as network auto-configuration purpose. The scheme takes into account the actual network topology and thus is fully topology-adaptive. Then a distributed link state (DLS) scheme is further proposed and put on top of the block addressing scheme to improve the quality of routes, in terms of hop count or other routing cost metrics used, robustness, and load balancing. The network topology reflected in logic addresses is used as a guideline to tell towards which direction (rather than next hop) a packet should be relayed. The next hop is derived from each relaying node’s local link state table. The routing scheme, named as topology-guided DLS (TDLS) as a whole, scales well with regard to various performance metrics. The ability of TDLS to provide multiple paths also precludes the need for explicit route repair, which is the most complicated part in many wireless routing protocols. While this paper targets low rate wireless mesh personal area networks (LR-WMPANs), including wireless mesh sensor networks (WMSNs), the TDLS itself is a general scheme and can be applied to other non-mobile wireless mesh networks.     

A Multi‐Strategic Concept‐Spotting Approach for Robust Understanding of Spoken Korean

We propose a multi‐strategic concept‐spotting approach for robust spoken language understanding of conversational Korean in a hostile recognition environment such as in‐car navigation and telebanking services. Our concept‐spotting method adopts a partial semantic understanding strategy within a given specific domain since the method tries to directly extract pre‐defined meaning representation slot values from spoken language inputs. In spite of partial understanding, we can efficiently acquire the necessary information to compose interesting applications because the meaning representation slots are properly designed for specific domain‐oriented understanding tasks. We also propose a multi‐strategic method based on this concept‐spotting approach such as a voting method. We present experiments conducted to verify the feasibility of these methods using a variety of spoken Korean data.     

Mergers and Acquisitions in the Telecommunications Industry: Myths and Reality

This paper investigates how market participants react to mergers and acquisitions (M&As) involving telecommunications companies. The empirical evidence suggests that such activities convey bad news to the market. This is consistent with the synergy trap hypothesis and extant empirical findings of value‐reducing diversification strategies in recent literature. The evidence also indicates that a cross‐border, rather than a domestic M&A deal, is the main driver of the negative market reaction. Further, our evidence of negative impacts on the bidder's business after an M&A reinforces our main finding that market participants, on average, perceive M&A activities to be detrimental to shareholder value. This suggests that value creation or synergy through an M&A deal is not warranted even though it can generate an increase in size of the firm.     

Inverted Staggered Poly-Si Thin-Film Transistor With Planarized SOG Gate Insulator

In this letter, we have studied the inverted staggered thin-film transistor (TFT) using a spin-on-glass (SOG) gate insulator and a low-temperature polycrystalline silicon (poly-Si) by Ni-mediated crystallization of amorphous silicon. The p-channel poly-Si TFT exhibited a field-effect mobility of 48.2 cm²/V ldr s, a threshold voltage of -4.2 V, a gate-voltage swing of 1.2 V/dec, and a minimum off-current of < 4 times 10^-13A/ mum at V_ds = -0.1 V. Therefore, the gate planarization technology by SOG can be applicable to low-cost large-area poly-Si active-matrix displays.     

Aptamer‐Functionalized Multidimensional Conducting‐Polymer Nanoparticles for an Ultrasensitive and Selective Field‐Effect‐Transistor Endocrine‐Disruptor Sensors

An endocrine disruptor (ED) is a type of xenobiotic compound that can cause serious diseases related to the estrous cycle, as well as various types of cancer. At low ED concentrations, estrogen receptors may respond as they would under physiological conditions. In this work, aptamer‐functionalized multidimensional conducting‐polymer (3‐carboxylate polypyrrole) nanoparticles (A_M_CPPyNPs) are fabricated for use in an FET sensor to detect bisphenol A (BPA). The multidimensional system, M_CPPyNPs, is first produced by means of dual‐nozzle electrospray of pristine CPPyNPs and vapor deposition polymerization of additional conducting polymer. The M_CPPyNPs are then immobilized on an amine‐functionalized (–NH₂) interdigitated‐array electrode substrate, through the formation of covalent bonds with amide groups (–CONH). The amine‐functionalized BPA‐binding aptamer is then introduced in the same way as that for M_CPPyNP immobilization. The resulting A_M_CPPyNP‐based FET sensors exhibit ultrasensitivity and selectivity towards BPA at unprecedentedly low concentrations (1 fm ) and among molecules with similar structures. Additionally, due to the covalent bonding involved in the immobilization processes, a longer lifetime is expected for the FET sensor.     

Study on Characteristics of Various RF Transmission Line Structures on PES Substrate for Application to Flexible MMIC

In this work, the coplanar waveguide is fabricated on a PES (poly[ether sulfone]) substrate for application to a flexible monolithic microwave integrated circuit, and its RF characteristics were thoroughly investigated. The quality factor of the coplanar waveguide on PES is 40.3 at a resonance frequency of 46.7 GHz. A fishbone‐type transmission line (FTTL) structure is also fabricated on the PES substrate, and its RF characteristics are investigated. The wavelength of the FTTL on PES is 5.11 mm at 20 GHz, which is 55% of the conventional coplanar waveguide on PES. Using the FTTL, an impedance transformer is fabricated on PES. The size of the impedance transformer is 0.318 mm × 0.318 mm, which is 69.2% of the size of the transformer fabricated by the conventional coplanar waveguide on PES. The impedance transformer showed return loss values better than –12.9 dB from 5 GHz to 50 GHz and an insertion loss better than –1.13 dB in the same frequency range.     

Effect of plasma process-induced damage on bias temperature instability of MOSFETs

For a surface-channel n-MOSFET and a buried-channel p-MOSFET, the effect of plasma process-induced damage on bias temperature instability (BTI) was investigated. The gate oxide thickness, t_ox, of the test MOSFETs was 2.0, 3.0, or 4.5 nm. The shifts of threshold voltage V_th and of linear drain current I_dlin were measured after applying a BTI stress at a temperature of 125 °C. The measured shifts of V_th and I_dlin indicate that BTI on ultra-thin gate CMOS devices appears only in the form of SiO₂/Si interface degradation, and that the positive BTI for the n-MOSFET as well as the negative BTI for the p-MOSFET is important for the reliability evaluation of CMOS devices. Because of positive plasma charging to the gate, a protection diode was very efficient at reducing BTI for the p-MOSFET, but it was much less effective for the n-MOSFET.     

A novel hidden station detection mechanism in IEEE 802.11 WLAN

The popular IEEE 802.11 wireless local area network (WLAN) is based on a carrier sense multiple access with collision avoidance (CSMA/CA), where a station listens to the medium before transmission in order to avoid collision. If there exist stations which can not hear each other, i.e., hidden stations, the potential collision probability increases, thus dramatically degrading the network throughput. The RTS/CTS (request-to-send/clear-to-send) frame exchange is a solution for the hidden station problem, but the RTS/CTS exchange itself consumes the network resources by transmitting the control frames. In order to maximize the network throughput, we need to use the RTS/CTS exchange adaptively only when hidden stations exist in the network. In this letter, a simple but very effective hidden station detection mechanism is proposed. Once a station detects the hidden stations via the proposed detection mechanism, it can trigger the usage of the RTS/CTS exchange. The simulation results demonstrate that the proposed mechanism can provide the maximum system throughput performance.     

Latch Applicator for Efficient Delivery of Dissolving Microneedles Based on Rapid Release of Elastic Strain Energy by Thumb Force (Adv. Funct. Mater. 11/2023)

Dissolving microneedle (DMN) is an attractive alternative to parenteral and enteral drug administration owing to its painless self-administration and safety due to non-generation of medical waste. For reproducible and efficient DMN administration, various DMN application methods, such as weights, springs, and electromagnetic devices, have been studied. However, these applicators have complex structures that are complicated to use and high production costs. In this study, a latch applicator that consists of only simple plastic parts and operates via thumb force without any external complex device is developed. Protrusion-shaped latches and impact distances are designed to accumulate thumb force energy through elastic deformation and to control impact velocity. The optimized latch applicator with a pressing force of 25 N and an impact velocity of 5.9 m s⁻¹ fully inserts the drug-loaded tip of the two-layered DMN into the skin. In an ovalbumin immunization test, DMN with the latch applicator shows a significantly higher IgG antibody production rate than that of intramuscular injection. The latch applicator, which provides effective DMN insertion and a competitive price compared with conventional syringes, has great potential to improve delivery of drugs, including vaccines.     

Consideration of the Actual Current-Spreading Length of GaN-Based Light-Emitting Diodes for High-Efficiency Design

Based on the proposed experimental method, the current spreading length of GaN-based light-emitting diodes (LEDs) was measured and analyzed for practical device design. In this study, Thompson's and Guo's models, which are categorized according to vertical series resistance (in particular, p-type contact resistance), were used to extract device parameters. It was shown that the measured current spreading length strongly depends on the injected current density. For LEDs fabricated with low-resistance p-type contacts, this behavior could be explained in terms of the accelerated current crowding with higher current densities occurring as a result of the reduced voltage drop across the junction, which is in good agreement with Thompson's relation. However, for LEDs fabricated with high-resistance p-contacts, unlike Guo's prediction, the measured current spreading length also showed a strong dependence on the injected current density. This was attributed to thermal heating at the p-contact, resulting in the reduction of the voltage drop across the p-contact and so junction voltage, which is also in agreement with Thompson's model. Based on the measured parameters and the design rule, efficient p-type reflectors, namely, hybrid reflectors were designed. Compared with conventional ones, LEDs fabricated with the hybrid reflectors exhibited better output power at a reasonable forward voltage, indicating that the proposed method is effective in understanding the actual current spreading and hence the practical design of high-efficiency LEDs.