Pressure fluctuation properties in combustion of mixture of anthracite and bituminous coal in a fluidized bed

The combustion characteristics of a mixture of anthracite and bituminous coal were studied in a 0.155 m i.d. fluidized bed combustor (FBC). The properties of the pressure fluctuation for the bed such as the standard deviation, cross-correlation function, dominant frequency and the power spectral density function were obtained through statistical analysis. To interpret the combustion characteristics in the FBC with uniform or multi-sized particles of anthracitebituminous coal mixture, the properties of pressure fluctuation were determined as a function of the particle size distribution and anthracite mixing fraction. In the present work, it is known that the combustion region could be obtained from the analysis of pressure fluctuation properties, and the mixed-firing of anthracite-bituminous coal is related to the reaction models of both coals and particle size distribution. Moreover, the relation between coal size distribution and static mean pressure, and the ignition region could be obtained from the mean pressure profile.     

Development of a Multiplex and Cost-Effective Genotype Test toward More Personalized Medicine for the Antiplatelet Drug Clopidogrel

There has been a wide range of inter-individual variations in platelet responses to clopidogrel. The variations in response to clopidogrel can be driven by genetic polymorphisms involved in the pathway of absorption, distribution, metabolism, excretion, and the target receptor P2Y12. A set of genetic variants known for causing variations in clopidogrel responses was selected, which included CYP2C19*2, *3, *17, CYP2B6*4, *6, *9, CYP3A4*18, CYP3A5*3, MDR1 2677G > T/A, 3435C > T, and P2Y12 H2 (742T > C). The simultaneous detection of these 10 variants was developed by using a multiplex PCR and single-base extension (MSSE) methodology. The newly developed genotyping test was confirmed by direct DNA sequencing in the representative positive control samples and validated in an extended set of 100 healthy Korean subjects. Genotyping results from the developed MSSE exhibited a perfect concordance with the direct DNA sequencing data and all of variants tested in 100 healthy Korean subjects were in agreement with Hardy-Weinberg equilibrium (p > 0.05). The present molecular diagnostic studies provide an accurate, convenient, and fast genotyping method for the detection of multiple variants. This would be helpful for researchers, as well as clinicians, to use genetic information toward more personalized medicine of clopidogrel and other antiplatelet drugs in the future.     

纤维/气凝胶泡沫混凝土的制备与性能研究

气凝胶因具有低导热系数、高孔隙率、轻质等优异特性而备受关注,同时还具有高疏水性及良好的吸声和减震功能.实验以气凝胶为填充材料,玻璃纤维丝为增强体,制备了一种新型超轻质纤维/气凝胶泡沫混凝土.结果 表明:玻璃纤维的掺入促进了泡沫混凝土的成型,在超轻泡沫混凝土制备过程中起到至关重要的作用.当纤维含量为0.9％时,导热系数为0.058 W/(m·K),其密度为205 kg/m3,远低于普通泡沫混凝土的导热系数(0.08～0.25 W/(m· K))与密度(300～1600 kg/m3).抗压强度为0.32 MPa,符合泡沫混凝土标准JG/T 266-2011中A03级抗压强度的要求.     

Physical properties of ethylene vinyl acetate copolymer (EVA)/natural rubber (NR) blend based foam

In this study an attempt was made to improve the rebound resilience and to decrease the density of ethylene‐vinyl acetate copolymer (EVA) foam. For this purpose, EVA was blended with natural rubber (NR), and EVA/NR blends were foamed at 155°C, 160°C, and 165°C. To investigate the correlation between crosslinking behavior and physical properties of foams, crosslinking behavior of EVA/NR blends was monitored. The physical properties of the foams were then measured as a function of foaming temperatures and blend compositions: 165°C was found to be the optimal temperature for a crosslinking of EVA/NR foam. As a result, the density of EVA/NR blend foamed at 165°C was found to be the lowest. EVA/NR (90/10) blend, foamed at 165°C, showed lower density, better rebound resilience, and greater tear strength than EVA foam. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2212–2216, 2004     

Effect of substrate on the phase transformation of TiO2 in pearlescent pigment

The TiO₂/substrate pearlescent pigments were prepared by the hydrolysis of TiOCl₂ on the substrate followed by a calcinations process. The natural mica (muscovite), synthetic mica (fluorophlogopite) and -alumina flake were selected as the substrates for pearlescent pigments. The effect of substrate on the anatase to rutile (A–R) phase transformation of TiO₂ was studied. The A–R phase transformation of TiO₂ during the preparation of pearlescent pigments and their proportion in the TiO₂ layer have been analyzed by XRD measurements. The phase compositions of TiO₂ layer in each pearlescent pigment are quite different depending on the substrates. The TiO₂ layer deposited on -alumina has higher rutile fraction than those on the natural and synthetic mica. The XPS analysis showed that the cations originally present in the substrates diffused into the TiO₂ layer. The TiO₂ layer deposited on -alumina contains Al, while those on the natural and synthetic mica substrates contain Si and K in addition to Al. The metal cations diffusing from the substrate into TiO₂ layer might retard the A–R phase transformation of TiO₂. The suppressing effect on the A–R transformation of TiO₂ by mixed cations seems to be much stronger than that of single cation, resulting in relatively higher rutile fraction in the case of TiO₂ layer deposited on -alumina.     

光纤AM CATV外调制发射技术

就光纤AMCATV外调制发射机的关键问题，即光源的选择、调制器的选择、非线性补偿、限幅失真抑制及CSO和CTB的闭环控制进行了较全面的论述。     

High-Efficiency Power Amplifier Using Novel Dynamic Bias Switching

A novel bias-switching scheme for a high-efficiency power amplifier is proposed. Two voltage levels for the drain bias of the RF power amplifier are generated using a combination of a class E dc/ac inverter and a class E rectifier with offset voltage. When signal peaks occur, the output of the class E dc/ac inverter is rectified and the rectified dc is added to the offset voltage by the class E rectifier, which boosts the drain bias of the RF power amplifier. Except during peaks, the drain bias of the RF power amplifier is connected to the offset voltage directly. Since the efficiency when there are no peaks is very high due to the direct connection between the offset voltage and drain bias, the overall efficiency of the RF power amplifier can be improved dramatically in high peak-to-average power ratio (PAPR) systems. The measured results show that the drain bias of the RF power amplifier is boosted up to approximately 1.8 times the offset voltage when the RF peaks generate. The overall efficiency of the proposed bias-switching amplifier is improved by 62% compared to that of the fixed bias amplifier in high PAPR systems     

基于盲源分离和时频分析的漏磁信号处理

利用独立分量分析的冗余取消特性,对多维加噪声观测信号进行盲源分离,得到源观测信号,实现噪声的有效消除,文章中应用此方法处理了仿真漏磁缺陷信号,实验结果表明:该除噪方法能极大提高漏磁信号的信噪比,且其效果要优于小波变换除噪方法.漏磁缺陷信号在时域上波形非常相似,很难加以分辨,而它们的危害性却大不相同,文章对裂纹和凹坑缺陷信号进行小波包分解,根据信号特征自适应的产生一组最优基来表征信号,分析这两种缺陷的时频特性,准确识别出这两种缺陷.     

Does genre type influence choice of video platform? A study of college student use of internet and television for specific video genres

With the introduction of multichannel video programming distributors and different types of video platforms, consumers have more choices of channels and platforms than ever. Specifically, the present study focuses on television and the Internet as video platforms.     

An Auto-configuration 4M Group Management using Wireless Sensor Networks for Reconfigurable Manufacturing System

<正>The first tier of automotive manufacturers has faced to pressures about move,modify,updating tasks for manufacturing resources in production processes from demand response of production order sequence for motor company and process innovation purpose for productivity. For meets this requirements,it has to require absolutely lead time to re-wiring of physical interface for production equipment,needs for change existing program and test over again.For prepare this constraints,it needs studying an auto-configuration functions that build for both visibility and flexibility based on the 4M(Man,Machine,Material, Method)group management which is supports from WSN (Wireless Sensor Network)of the open embedded device called M2M(Machine to Machine)and major functions of middleware including point manager for real-time device communication,real-time data management,Standard API (Application Program Interface)and application template management.To be application system to RMS (Reconfigurable Manufacturing System)for rapidly response from various orders and model from motor company that is beginning to establishing the mapping of manufacturing resources of 4M using WSN.