(1-x)KNN-xNKBT无铅压电陶瓷的结构及其电性能研究

采用传统固相法制备了(1-x)K0.5Na0.5NbO3-x(Na0.8K0.2)0.5Bi0.5TiO3(x=0-5%)无铅压电陶瓷,研究了(Na0.8K0.2)0.5Bi0.5TiO3的不同引入量对其物相结构、显微形貌、介电性能以及压电性能的影响。结果表明:所有样品都具有钙钛矿结构;随着x的增加,室温下样品从正交相逐渐向四方相过渡并且居里温度向低温方向移动,样品的压电常数d33与机电耦合系数kp均先升高后降低。该体系多晶型转变PPT位于2%≤x≤3%,当x=3%时,样品的压电性能达到最佳,其中:d33=189pC/N,kp=41%,Qm=96,tanδ=0.028。     

Controllable ring‐opening polymerization of trimethylene carbonate catalyzed by aliphatic tertiary amines in the presence of benzyl alcohol or F127

With the increased awareness of avoiding residue metals, the field of organocatalysts is attracting more attention. Aliphatic tertiary amines, such as triethylamine (TEA), N, N, N, N‐tetramethylethylenediamine (TMEDA) and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDTA), have low boiling points which allow their easy elimination after a chemical reaction. Here, we used these aliphatic tertiary amines to catalyze ring‐opening polymerizations (ROPs) of trimethylene carbonate (TMC). In the presence of benzyl alcohol, the catalytic activities of the tertiary amines were in the order of TEA < TMEDA < PMDTA. Correlation between the molecular weight of polycarbonates and monomer conversions was linear, suggesting the polymerization was controlled. The polymerization pathway was presumed to follow an alcohol‐activated mechanism according to the end‐group fidelity determined using ¹H NMR spectroscopy. The ROP of TMC was also successfully initiated by PEO₉₉‐PPO₆₅‐PEO₉₉ (F127) under the catalysis of the tertiary amines, producing well‐defined PTMC_n‐F127‐PTMC_n copolymers with narrow dispersity ( ca 1.2) and with thermosensitive properties in aqueous solution. Furthermore, copolymerizations of TMC with acryloyl‐containing cyclic carbonate were catalyzed by the tertiary amines in the presence of F127. No crosslinking reactions were detected. Our results demonstrate that the aliphatic tertiary amines have the potential to catalyze TMC homo‐ or copolymerization featuring controllable structure and composition under mild conditions. Copyright © 2012 Society of Chemical Industry     

Selection of weak VARMA models by modified Akaike's information criteria

This article considers the problem of order selection of the vector autoregressive moving‐average (VARMA) models under the assumption that the errors are uncorrelated but not necessarily independent. These models are called weak VARMA by opposition to the standard VARMA models, also called strong VARMA models, in which the error terms are supposed to be i.i.d. We relax the standard independence assumption to extend the range of application of the VARMA models, allowing us to treat linear representations of general nonlinear processes. We propose a modified version of the Akaike information criterion for identifying the orders of weak VARMA models.     

Intumescent flame retardant TPO composites: Flame retardant properties and morphology of the charred layer

Intumescent flame retardant thermoplastic polyolefin (TPO) composites were prepared to study the relationships between their structure of charred layer (including of the multicellular intumescent layer and the charry layer) and flame retardant properties. They were characterized using the LOI and UL‐94 test, which indicated that the best fire retardant behavior (V‐0 rating and LOI reach to 28.1%) was obtained at the formulation of TPO/ammonium dihydrogen phosphate/starch (100/60/20). Thermal gravimetric analysis demonstrated that the presence of ammonium dihydrogen phosphate/starch promoted the esterification and carbonization process in lower temperature range while enhancing the thermal stability of intumescent flame retardant TPO in high‐temperature range. Scanning electron microscope and optical microscope were shown that, with combustion time prolonged, the intumescent layers obtained greater number of cells, and the charry layer became more compact while the size of the carbon granules became smaller on the surface. Introduction of starch had an obvious effect on the structure of the intumescent and charry layers. The charry layer of the composites with the content of 20 phr starch was more compact and uniform than that of the composites with 50 phr. The weight ratio of ammonium dihydrogen phosphate to starch in the intumescent flame retardant was fixed as 3 : 1 which cooperated with each other well to promote a compact charry layer and to obtain the better flame retardancy performance. Therefore, the better the charred layers produced, and the better flame retardant properties they obtained. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

In vitro skin permeation and cellular protective effects of flavonoids isolated from Suaeda asparagoides extracts

The objective of this study was to compare astragalin (kaempferol-3-O-glucoside) isolated from Suaeda asparagoides extract with kaempferol, an aglycone of astragalin showing the anti-oxidative activity, the cellular protective effect, and skin permeability. Kaempferol was superior to (+)-α-tocopherol and l-ascorbic acid known as strong antioxidants in the antioxidative activity by DPPH method and chemiluminescence assay. Astragalin and kaempferol exhibited more prominent cellular protective effect than the lipid peroxidation chain blocker, (+)-α-tocopherol. In this in vitro permeation experiment of astragalin and kaempferol through the ICR mouse skin, kaempferol permeated deeper into the skin than astragalin. These results indicate that kaempferol and astragalin can function as antioxidants in biological systems, particularly skin exposed to solar radiation, and protect cellular membranes against reactive oxygen species.     

益阳橡机整体搬迁技改建设项目加快推进

正2020年4月4日,益阳橡胶塑料机械集团有限公司(简称益阳橡机)朝阳产业园厂区的一台加工平板硫化机热板和框板的超大型专用设备—22m×4m的数控双龙门铣(磨)机床由沈阳制造厂家人员拆机,运回沈阳返厂大修,拉开了益阳橡机整体搬迁技改项目—"智能型橡胶机械数字化制造基地建设项目"中搬迁设备升级改造的序幕。     

胎体骨架材料对轿车子午线轮胎性能的影响

研究胎体采用聚酯帘布和钢丝帘线对轿车子午线轮胎性能的影响,探讨轿车子午线轮胎胎体采用钢丝帘线的优缺点。结果表明:与聚酯帘布轮胎相比,钢丝帘线轮胎强度性能、高速性能和低气压耐久性能提高;硬度因数减小,在相同轮胎质量下滚动阻力更低;横向刚性和纵向刚性均减小,驾乘舒适性更好;接地印痕面积更大,单位面积平均压力更小,轮胎的耐磨性能更好,制动性能更佳;在充气压力增大至350 kPa时,负荷性能更好,更有利于安全驾驶;采用1层钢丝帘布替代2层聚酯帘布可以降低成本。目前,轿车轮胎胎体骨架材料采用钢丝帘线仍存在许多问题需要解决。     

An economic and sensitive method for extracting chromium speciation in airborne inhalable dust,using a green sample treatment coupled with electrothermal atomic absorption

ABSTRACT

A new approach of cloud point extraction CPE procedure is optimized for hexavalent chromium determination in airborne dusts. Triton X-114 is used as a surfactant and 1-(2-pyridylazo)-2-naphthol as a specific complexing agent for the trivalent chromium’s removal from the aqueous phase to isolate hexavalent chromium compounds. The parameters influencing the extraction protocol (pH, surfactant concentration, and temperature are optimized. The obtained detection and quantification limits are 0.1 and 0.4 μg/L, respectively. The linearity is verified, with a regression coefficient close to 0.999 and the extraction recovery exceeds 99%. The method was successfully applied to analyze airborne samples collected from workplaces.     

铁尾矿砂力学特性及再生利用研究进展

铁尾矿砂的储量日趋增加,要减小铁尾矿坝的风险、提高铁尾矿砂的利用率,须明确铁尾矿砂的力学特性.通过对铁尾矿砂静力特性及动力特性的分析发现,尾矿砂的粒径分布是决定尾矿坝稳定及铁尾矿砂再生利用的主要因素之一,细粒含量、干密度、含水率等因素对铁尾矿砂动力特性有一定影响.再生利用铁尾矿砂的主要方式是将铁尾矿砂混凝土、改性铁尾矿砂用作工程材料,水泥、石灰、纤维是改性铁尾矿砂的主要材料.最后指出需进一步研究新型材料取代传统改性材料改善铁尾矿砂的力学特性,从而提高资源利用率.     

Effect of the plant waste onto the properties of use and the microstructure of phyllosilicates based ceramics

The present study aimed at using plant waste (Musa Paradisiaca) for manufacturing clay-based ceramics in order to promote lower sintering temperature while preserving the properties of use. Two kaolinic-illitic clays (NZ1 and KO) from Central African Republic were used mixed with 1 to 10 mass% of the plant waste (MP). The clays and the waste exhibited accessory phases: quartz and iron oxides, and K₂O respectively. MP was collected, dried and sieved (<100 μm) previously to its mixture with clays. According to the sintering behavior of KO and NZ1 derived from thermodilatometry, the densification was obtained after firing at 1200°C. Results showed that open porosity decreased from 35% to 17% with increasing temperature in the range 900 to 1200°C for KO and NZ1. This porosity remained in the range 30%-40% while increasing the MP content (firing at 1000°C for 1h.). The optimized MP content was 3 and 5 mass% for KO and NZ1 clay materials respectively. The compressive strength and thermal conductivities were improved compared to clay samples without MP fired at 1200°C. Moreover a significant decrease in the sintering temperature was achieved, leading to energy saving in line with sustainability issues.