有机试剂结构与性质的研究：Ⅻ.有机试剂的pKa与改进的Hammett方程

有机试剂的ｐＫａ是其重要物化参数，是有机试剂酸碱性的度量，直接决定配合物的稳定性。应用改进的Ｈａｍｍｅｔｔ方程处理取代基常数与ｐＫａ的关系，得到满意的结果。     

甲氨蝶呤囊泡的制备和体外释放性能研究

用非离子表面活性剂和胆固醇为原料,采用薄膜分散法制备甲氨蝶呤囊泡,通过透析法分离未包封的药物,紫外分光光度法测定包封率和体外释药性。结果显示,Span 60与胆固醇形成的囊泡(VSpan 60∶VCHOL=5∶3),在50℃超声40 m in的条件下,对0.60 g/L的甲氨蝶呤包封率可达65%以上,在模拟胃流体和模拟肠流体中均有良好的缓释作用。     

Al2O3／TiB2／SiCW陶瓷刀具加工镍基合金时的磨损机理研究

研究了Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ陶瓷刀具加工Ｉｎｃｏｎｅｌ７１８镍基合金时的切削性能和磨损机理。结果表明；在低速切削条件下，Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ和硬质合金刀具的抗后刀面磨损的能力相差不大；而在高速切削条件下，前者的抗后刀面磨能力远高于后者。     

Structural and electrochemical characterization of mechanochemically synthesized calcium zincate as rechargeable anodic materials

Hydrated calcium zincate was synthesized by mechanical ball milling of ZnO and Ca(OH)₂ in water at room temperature. The structural and electrochemical properties of this material used as rechargeable anodic material were examined by microelectrode voltammetry, charge–discharge measurements and structural analysis. The results showed that during mechanical milling, ZnO, Ca(OH)₂ and H₂O reacted rapidly to form Ca[Zn(OH)₃]₂ · 2H₂O which was subsequently transformed to a stable structure CaZn₂(OH)₆ · 2H₂O. Since this composite oxide has lower solubility in KOH solution (<35 wt %) and better electrochemical reversibility than ZnO-based negative materials, the zinc anodes using this material can overcome the problems of shape changes and dendritc formation, and therefore exhibit improved cycling life.     

对苯二胺生产工艺条件的研究

对以铁 盐酸为还原体系 ,由对硝基苯胺制取对苯二胺的工艺条件进行了研究 ,研究了各种工艺条件如反应的配料、pH、温度、升华条件等对产率和产品质量的影响 ,获得了最佳的合成工艺。实验表明 :还原反应的反应温度在 95℃～ 10 5℃、pH为 3～ 4时 ,产率在 70 %以上 ;减压升华时油浴温度在 2 4 0℃ ,真空度为0 0 5MPa ,升华气相温度为 5 5℃～ 6 5℃时 ,产品的质量和白度达标     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

铝型材加工氧化着色污水处理的工程实践

采用中和—加药混凝—沉淀—压滤除渣的方法处理铝型材加工氧化着色污水。出水pH值及悬浮物等指标满足《污水综合排放标准》GB8978—96中一级排放标准。改气浮法为沉淀法,采用竖流式沉淀池,简化工艺流程,缩短处理时间,节约投资与运行费用。     

粉煤灰内燃烧结砖内燃料发热量确定的探讨(二)

介绍燃料发热量的基本知识，阐明粉煤灰内燃砖内燃料的发热量，应以内燃料燃烧放出的实际用于砖烧成的热量为科学依据，进行科学合理的确定。     

Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries

Based on the voltammetric behaviour of a series of methyl-substituted benzenes in 1M LiPF₆/EC-DMC electrolyte, xylene was selected and tested as an electrolyte additive for overcharge protection of Li-ion batteries. From the overcharge curves, CV behaviour and SEM observations of the cells in the presence of xylene, it was found that the additive can polymerize at the overcharged voltage to form a dense layer of isolating polymer film at the cathode surface, which blocks off further oxidation of the electroactive material and electrolyte and, therefore, improves the overcharge tolerance of the Li-ion battery. In addition, the xylene additive has shown only a slight influence on the cycling behaviour.