A kinetic study on the reduction of manganese III in presence of citric acid

The rate of reduction of manganese III stabilised by citric acid under variable conditions of Mn(III) concentration, ionic strength, pH and temperature in buffered media was found to obey a second order rate equation, first order with respect to Mn(III) autocatalysed by Mn(II). The reduction was found to proceed to an equilibrium value. The observed rate constants were found to follow a linear relationship with hydrogen ion concentration. Interpretation of results is based on the assumption that there are two reducible species in equilibrium; the aquocomplex and its hydrolysed form. A reaction mechanism is proposed to account for the experimental results. The overall energy (ΔE) and entropy (ΔS) of activation are compared with those for the reduction of Mn(III) in presence of other organic substrates.     

Equilibrium adsorption isotherm and controlled release of antibiotic drug chloroamphenicol from poly(2‐vinyl pyridine/acrylic acid) hydrogels prepared by gamma radiation

High water sorption of 2‐vinyl pyridine (2‐VP)/acrylic acid (AAc) hydrogel were prepared by free‐radical polymerization in aqueous solution of 2‐VP with AAc as comonomer. The amount of ionic monomer (AAc), the irradiation dose of prepared hydrogel, the pH, and the concentration of drug play an important factor on loading, adsorption, and releasing of water‐soluble chloroamphenicol drug. As a result of dynamic swilling tests, the effect of relative content of AAc on the swelling showed that it allowed a non‐Fickian type of water diffusion. The adsorption of the drug onto (2‐VP/AAc) hydrogels was studied by Freundlish adsorption isotherm. The drug concentrations showed an influence on the adsorption of drug which increased with increasing AAc content. From Freundlish adsorption isotherm, the empirical constants, k and n, can be evaluated and showed the ability of hydrogel to be loaded by the drug and the affinity of the drug to be uptake onto the hydrogel respectively. FTIR, TGA, and SEM techniques were used to study the characterization of hydrogel (2‐VP/AAc). Additionally, the release of the drug loaded from hydrogel discs was studied microbiologically to show that hydrophilic structure of the hydrogel has an antimicrobial effect as a dehydration of cytoplasm and unbalance of the cell wall functions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The paradoxical effects of legal intervention over unethical information technology use: A rational choice theory perspective

While the IS literature offers rich insights into the kinds, causes and consequences of unethical information technology use (UITU), we know little about the degree to which legal intervention may mitigate UITU. Our research aims at understanding how legal intervention could mitigate UITU by influencing the cost-benefit analysis in determining the decision to commit such unethical use of IT. Our contributions are twofold. First, we provide testable propositions on the role of legal intervention. Second, we offer an innovative take on intervention – conceived as a multi-mechanism process that adapts to UITU as well as to the way IT users negotiate the IT artifact.     

Variation of the specific surface area and porosity of zinc oxide prepared in various atmospheres

Specific surface area and pore structure studies were carried out on zinc oxide samples prepared from zinc oxalate dihydrate by heating at 330 and 370°C and in various atmospheres of water vapour, oxygen and hydrogen. The variation of S_BET with water vapour pressure for the samples heated at 330°C was found to show a behaviour which can be compared with the Smith-Topley effect. For the samples prepared at 370°C, rapid sintering occurred, and the Smith-Topley effect was not followed in this case. Zinc oxide prepared in an oxygen atmosphere gave higher surface area values than that prepared in a hydrogen atmosphere, which is thought to be due to the oxidation of the carbon impurities on the surface. Analysis of nitrogen adsorption isotherms by the t-method revealed the existence of micropores in the sample prepared at 330°C in vacuo. The rest of the samples have wide pores.     

Competitive Contribution of Catalyst and Adsorption Roles of TiO2 on the Degradation of AO7 Dye During Plasma Treatment

In order to investigate the role of TiO2 during plasma treatment,the degradation of the dye AO7 has been studied by gliding arc discharge in the presence of a TiO2 catalyst(CGAD).The results revealed that the adsorption of the dye on TiO2 is a physical adsorption in accordance with Langmuir isotherm,with a constant of adsorption KL=0.52 mg/L and a maximum adsorption capacity b=18.1 mg/g.The temperature variation of the reaction medium made it possible to consider thermodynamic parameters.Indeed,the adsorption is exothermic(enthalpy:△H 0),and spontaneous(free enthalpy:△G 0).The negative entropy(△S0) confirms the afnity of the dye molecules for TiO2.20 min of CGAD treatment in the presence of an optimal quantity of TiO2(2 g/L enabled us to bleach the solution of AO7(100 μM) completely.The discoloration rate with and without the addition of TiO2 was 100% and 28%,respectively.40 additional minutes of treatment allowed a total abatement of the chemical oxygen demand.The elimination of AO7 molecules during the plasma-catalytic treatment follows Langmuir-Hinshelwood(L-H) model kinetics.According to this model,the speed constant is kr=14.97 mg · L 1· min 1and the adsorption coefcient is KL-H = 0.010 L/mg.The latter being negligible compared to kr,adsorption is therefore weakly performed during the plasma treatment.     

Advances in Polymer-based Nanostructured Membranes for Water Treatment

Water pollution has become the most severe dilemma in the entire world. In this review, we have discussed the advancement in preparation and properties, plus background and challenges regarding polymer-based nanocomposite membranes. Nanofiltration thin film composite membranes have been given tremendous attention over last two decades relative to conventional systems in desalination of sea water, waste water from industries and ultra pure water production etc. In recent years, significant research efforts have been devoted towards the development of high-performance membranes through surface modification of polymers and nanoparticles, nanotubes, etc. to achieve appreciable salt rejection, water flux and antifouling properties.     

Investigation of the candesartan cilexetil antihypertensive drug microencapsulation by PLA-PVP K30 biodegradable polymers: Experimental optimization and release kinetics modelling

Candesartan is an angiotensin receptor blocker (ARB) used to treat hypertension. However, its poor aqueous solubility and oral bioavailability have limited its therapeutic applications. In order to increase bioavailability and control the release of candesartan condensation, microspheres containing biodegradable polymers (polyvinylpyrrolidone [PVP K30] and polylactic acid [PLA]) in different ratios were prepared by the o/o solvent evaporation method using Span 80 as a surfactant. In addition, the impact of encapsulation parameters (i.e., PVP K30 and PLA concentrations) on the encapsulation ratio and release percentage was investigated by the mixed factorial design method. The release kinetics of the microspheres was simulated by combining two methods, the Dragonfly algorithm and a support vector machine (DA-SVM). The experimental data were in good agreement with the predicted data, with a coefficient of determination close to unity and a mean square error close to zero. Fourier-transfer infrared spectrometry (FTIR) analysis revealed the presence of condensation in all formulations without reporting distortion in the spectra. Scanning electron microscopy (SEM) confirmed the successful synthesis of microspheres, whose sizes were between 12 and 26 μm. Formulations with a PLA-drug ratio of 6:1 (N15, N17, and N18) showed the highest encapsulation efficiency (68%, 71%, and 70%, respectively), while formulations that do contain PVP K30, such as N5, N4, and N3, showed a higher release (83%, 84%, and 89%, respectively), indicating that the agent (PVP K30) enhanced the bioavailability and release of candesartan. Overall, N3 showed a higher drug release rate at 12 h and important encapsulation efficiency, making it the optimal formulation obtained in this study.     

Variation of the specific surface area and porosity of zinc oxide prepared in various atmospheres

Specific surface area and pore structure studies were carried out on zinc oxide samples prepared from zinc oxalate dihydrate by heating at 330 and 370°C and in various atmospheres of water vapour, oxygen and hydrogen. The variation of S_BET with water vapour pressure for the samples heated at 330°C was found to show a behaviour which can be compared with the Smith-Topley effect. For the samples prepared at 370°C, rapid sintering occurred, and the Smith-Topley effect was not followed in this case. Zinc oxide prepared in an oxygen atmosphere gave higher surface area values than that prepared in a hydrogen atmosphere, which is thought to be due to the oxidation of the carbon impurities on the surface. Analysis of nitrogen adsorption isotherms by the t-method revealed the existence of micropores in the sample prepared at 330°C in vacuo. The rest of the samples have wide pores.