Biogenic Amine Contents in Non-alcoholic Beers: Screening and Optimization of Derivatization

A rapid, sensitive, and reproducible high-performance liquid chromatographic procedure for the determination of nine biogenic amines in non-alcoholic beers was developed by an optimized benzoylation procedure. A Plackett–Burman factorial design was used in order to screen the statistically significant variables. The significant factors of biogenic amine benzoylation, reagent volume and pH, were optimized by a complete factorial response surface design, and optimal reaction conditions were generated. The optimized method showed good linearity (correlation coefficients > 0.997) and good recoveries (from 88.6 to 104.7 %). The repeatability and reproducibility of method were >3.9 and >4.6 %, respectively. Moreover, the detection limits of biogenic amines were calculated between 0.05 and 0.15 μg/ml in wine samples. The optimized method has been applied to the determination of biogenic amine contents of non-alcoholic beers consumed in Iran. Their values ranged from 0 to 2.56 mg/l, no significant differences (p?>?0.05) were observed between the analyzed samples, and none of these samples surpass the toxic levels reported in the literature.     

La microscopie confocale: interet pour l'analyse du relief cutané. Un outil d'évaluation dermo-cosmétique

Nowadays, the determination of human skin microtopography is usually carried out by methods based on mechanical techniques (profilometry and surfometry), or founded on optical conception (shadowing method and profilometry). Negative skin replicas made of a silicone rubber material (Silflo((R))) or positive casts performed from an epoxy resin (Araldite((R))), are used to assess the skin microstructure. Skin surface microtopography is quantified by measuring furrows depths and spaces between them. An original application using confocal scanning laser microscope (CLSM) is described in this paper. The CLSM gives simultaneously images of the skin surface associated with quantitative measurements of the microtopography. With this apparatus, it is easy to achieve perfect skin replica images with assessment of its microstructure, before and after applications of topical medicines or cosmetic products to evaluate the skin surface restoration. It is worth to mention that it is indispensable to analyse the same skin surface (same plateaux and same furrows). For this reason, it is necessary to localize exactly and to replicate the same skin surface area (4 mm(2)) before and after the cosmetic use, whatever the extended period of the topical application.     

A chromium complex under water oxidation: A conversion mechanism and a comprehensive hypothesis

Water splitting toward hydrogen production is a promising method to store energy, but water oxidation is a bottleneck for water splitting. First-row transition metal complexes have been extensively used for water-oxidation reaction. However, only one chromium complex has been applied for water-oxidation reaction until now. Thus, the reinvestigation of water-oxidation reaction by this chromium complex in detail is interesting. Herein, water-oxidation reaction by the chromium complex with diphenoxy N,N′-ethylenebis(salicylimine) (SALEN) ligand is reinvestigated using scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction studies, X-ray photoelectron spectroscopy, thermal gravimetric analysis, elemental analysis, Fourier-transform infrared spectroscopy, and electrochemical methods. All the experiments showed that the chromium complex is neither a catalyst nor a precatalyst for water-oxidation reaction. During OER, a relationship between first-row transition metal complexes and the related metal oxides has been proposed.     

Eco-friendly biodiesel production from olive oil waste using solar energy

This study was carried out to produce biodiesel from olive oil waste by transesterification reaction. Several important reaction variables (the weight ratio of oil to methanol, the temperature, and reaction time) were evaluated to obtain a high quality of biodiesel fuel that meets authentic standards. Solar energy was applied for the transesterification reaction and electricity generated by photovoltaic panels was used to power a motor for mixing the reaction solution.     

Gas-phase transport and entropy generation during transient combustion of single biomass particle in varying oxygen and nitrogen atmospheres

Transient combustion of a single biomass particle in preheated oxygen and nitrogen atmospheres with varying concentration of oxygen is investigated numerically. The simulations are rigorously validated against the existing experimental data. The unsteady temperature and species concentration fields are calculated in the course of transient burning process and the subsequent diffusion of the combustion products into the surrounding gases. These numerical results are further post processed to reveal the temporal rates of unsteady entropy generation by chemical and transport mechanisms in the gaseous phase of the reactive system. The spatio-temporal evolutions of the temperature, major chemical species including CO, CO₂, O₂, H₂ and H₂O, and also the local entropy generations are presented. It is shown that the homogenous combustion of the products of devolatilisation process dominates the temperature and chemical species fields at low concentrations of oxygen. Yet, by oxygen enriching of the atmosphere the post-ignition heterogeneous reactions become increasingly more influential. Analysis of the total entropy generation shows that the chemical entropy is the most significant source of irreversibility and is generated chiefly by the ignition of volatiles. However, thermal entropy continues to be produced well after termination of the particle life time through diffusion of the hot gases. It also indicates that increasing the molar concentration of oxygen above 21% results in considerable increase in the chemical and thermal entropy generation. Nonetheless, further oxygen enrichment has only modest effects upon the thermodynamic irreversibilities of the system.     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

Transforming shortcomings into opportunities: Can market incentives solve Lebanon's energy crisis?

Over the past decades Lebanon's energy sector has been largely ignored and this has led to high economic and environmental costs. The sector is characterized by electricity poverty, an expanding and mainly unregulated transport sector and a lack of energy savings spanning through all sectors of the economy. Recently, the Government of Lebanon has committed to increase the share of renewable energy to 10% of the total energy supply by 2013 and to 12% by the year 2020; it also aims at reducing energy consumption by 6% by the year 2013. This paper aims at contributing to the formulation of a more comprehensive energy strategy for Lebanon by analyzing the recent changes in policy direction and by recommending legal, regulatory and policy measures in order to transform current shortcomings into opportunities allowing the country to become a regional ‘success story’ in the deployment of renewable energy and energy efficiency.     

Modelling of Impedance Matching Circuit with Digital Capacitor in Narrowband Power Line Communication

Power line communication technology is used in various applications, from high voltage network to the low voltage network, as it is the only wired communication technology that is comparable with wireless communication network. It works by injecting a modulated carrier wave into the electric cables from one transceiver to another. But still, the noise level and impedance mismatch are still the main concern of this technology, particularly in the low voltage network in residential area. Power line has additive non-white noise and extremely harsh environment for communication. At the same time, there is signal attenuation along the power line caused by the impedance mismatch in the power line network. Even though these problems can be controlled using a band-pass filter and an impedance matching circuit respectively, but the impedances in the power line are time and location variant and it is rather difficult to design a circuit that allows maximum power transfer in the system all the time. Thus in this paper, a new adaptive impedance matching circuits is proposed for narrowband power line communication. This methodology is derived based on the RLC band-pass filter circuit. This concept is designed to achieve simpler configuration and higher matching resolution.