Touch sensor and photovoltaic characteristics of CuSbS2 thin films

Spin-coated chalcostibite CuSbS₂ thin films (≈500 nm thick) were fabricated and the influence of the drying temperature on the structural, morphological, optical and thermoelectric properties of the films was investigated. Crystalline phase-pure chalcostibite has been obtained for the films dried at 180 °C and 210 °C, while below 180 °C these films are partially amorphous. Surprisingly, at drying temperature of 240 °C, a Cu_xS secondary phase appeared. The increase of the drying temperature leads to the increase of the particle size and the decrease of the optical band gap, which is interesting for optoelectronic applications. The highest power factor value was achieved for the film dried at 210 °C, due to the inexistence of secondary phases, which allowed realizing a stable thermoelectric touch sensor with a V_signal/_noise of 5. In addition, this film was tested as a photovoltaic (PV) device and a power conversion efficiency (PCE) of 0.030% with an open-circuit voltage (V_OC) of 0.36 V, a short-circuit current density (J_SC) of 0.278 mAcm^?2 and a fill factor (FF) of 0.27 were obtained. Therefore, this work evidences a pathway toward developing bi-functional devices with simultaneously thermoelectric touch sensor and photovoltaic functions.     

Apron design for protecting double‐skin façade fires

Although double‐skin façade (DSF) is an environmental‐friendly architectural feature, its fire behaviour is a deep concern. The interior glass system including the glass pane, metal frame and associated accessories will be hotter than the exterior glass system as demonstrated by earlier studies. The glass pane above the fire room will be broken to spread flame into the upper compartment. Aprons are proposed to protect the air cavity of DSF in a way similar to those outside a single‐skin façade. In this paper, the effect of aprons in protecting against fire spread from an underlying compartment to the compartments above by preventing glass breakage of the inner glass pane was studied. Fire and smoke from a post‐flashover room fire adjacent to the DSF would be trapped in the air cavity between the two glass panes. Spreading of hot gases with different apron widths was studied by numerical simulations with CFD first. Fire environment with and without breaking the apron immediately above the fire room was studied. Full‐scale burning tests on part of an experimental DSF rig were then carried out to demonstrate the performance of horizontal apron in the DSF rig of 6 m tall and air cavity depth of 2 m with different apron widths. All demonstrated that providing apron is appropriate in protecting DSF fires. Copyright © 2014 John Wiley & Sons, Ltd.     

Facile green synthesis, optical and photocatalytic properties of zinc oxide nanosheets via microwave assisted hydrothermal technique

Novel hexagonal two dimensional ZnO nanosheets were successfully and economically synthesized using zinc acetate and urea based on a facile microwave hydrothermal method. The structure, morphology and size of the ZnO nanosheets were investigated by X-ray diffraction (X-ray), field emission scanning electron microscopy (FESEM), energy dispersive analysis of x-ray (EDS), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and Fourier transform infrared spectroscopy (FTIR). X-ray analysis showed that the obtained ZnO nanosheets are crystalline corresponding to the pure ZnO phase with an average particle size of 12 nm. Optical properties of ZnO nanosheets were investigated by UV-Vis absorption and photoluminescence (PL) techniques. The band gap energy of ZnO nanosheets was found to be 3.29 eV. The photoluminescence (PL) measurement shows a strong UV emission, blue emission and blue-green emission bands. ZnO nano sheets possess a higher photocatalytic activity leading to the degradation of methylene blue (MB). The ZnO nanosheets are expected to have new opportunities in vast research areas and for application in catalysts and optoelectronic devices.     

Structure identification of Boolean relations and plain bases for co-clones

We give a quadratic algorithm for the following structure identification problem: given a Boolean relation R and a finite set S of Boolean relations, can the relation R be expressed as a conjunctive query over the relations in the set S? Our algorithm is derived by first introducing the concept of a plain basis for a co-clone and then identifying natural plain bases for every co-clone in Post's lattice. In the process, we also give a quadratic algorithm for the problem of finding the smallest co-clone containing a Boolean relation.     

Microbial conversion of androst‐1,4‐dien‐3,17‐dione by Mucor racemosus to hydroxysteroid‐1,4‐dien‐3‐one derivatives

BACKGROUND: A large number of bacterial, fungal and microalgal species are able to bio‐transform steroid compounds. Among them, fungi from the Mucor genus have been shown to mediate hydroxylation, oxidation, and desaturation by the double bond formation and epoxidation of various steroid substances. Mucor racemocus has not been studied for its ability to modify androst‐1,4‐dien‐3,17‐dione, a pharmaceutically important steroid precursor. RESULTS: The filamentous fungus M. racemosus was applied for bioconversion of androst‐1,4‐dien‐3,17‐dione (ADD, I ) in a 5‐day fermentation. Microbial metabolites were purified chromatographically and identified on the basis of their spectral data as 17β‐hydroxyandrost‐1,4‐dien‐3‐one ( II ), 14α‐hydroxyandrost‐1,4‐dien‐3,17‐dione ( III ), 15α‐hydroxyandrost‐1,4‐dien‐3,17‐dione ( IV ), 15α,17β‐dihydroxyandrost‐1,4‐dien‐3‐one ( V ), 14α,17β‐dihydroxyandrost‐1,4‐dien‐3‐one ( VI ), and 6β,17β‐dihydroxyandrost‐1,4‐dien‐3‐one ( VII ). CONCLUSION: Observed modifications included hydroxylation at C‐6β, C‐14α, C‐15α positions and 17‐carbonyl reduction. The best fermentation conditions for production of hydroxysteroid‐1,4‐dien‐3‐one derivatives were found to be 25 °C at 150 rpm for 5 days with a substrate concentration of 0.5 g L^?1. Copyright © 2009 Society of Chemical Industry