Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

Valorization of Beef Tallow by Lipase-Catalyzed Interesterification with High Oleic Sunflower Oil

Although beef tallow (BT) has been considered a hard low-trans fat convenient to be used in several bakery applications, it has some undesirable characteristics like fatty acid composition, crystallization behavior, graininess formation and poor plastic range. This work studied the modification of BT by blending at different percentages with high oleic sunflower oil (HOSFO) followed by the enzyme-catalyzed interesterification of the blends. The reduction in the solid fat content achieved by the simple blending was enhanced by the interesterification process, as a result of the increase in the concentration of the diunsaturated monosaturated type triacylglycerols. Interesterification strongly impacted too on the crystallization behavior of the blends, since products showed more homogeneous and regular crystals than the starting mixture. Results show that lipase catalyzed interesterification of BT with HOSFO offers a useful tool for the design of fats with adjustable physicochemical properties, improved with respect to that of the starting fats.     

Mechanical,morphological, and thermal properties of poly(vinyl chloride)/low‐density polyethylene composites filled with date palm leaf fiber

This article investigates the mechanical, morphological, and thermal properties of poly(vinyl chloride) (PVC) and low‐density polyethylene (LDPE) blends, at three different concentrations: 20, 50, and 80 wt% of LDPE. Besides, composite samples that were prepared from PVC/LDPE blend reinforced with different date palm leaf fiber (DPLF) content, 10, 20, and 30 wt%, were also studied. The sample in which PVC/LDPE (20 wt%/80 wt%) had the greatest tensile strength, elongation at break, and modulus. The good thermal stability of this sample can be seen that T_10% and T_20% occurred at higher temperatures compared to others blends. DPLF slightly improved the tensile strength of the polymer blend matrix at 10 wt% (C10). The modulus of the composites increased significantly with increasing filler content. Ageing conditions at 80°C for 168 h slightly improved the mechanical properties of composites. Scanning electron microscopic micrographs showed that morphological properties of tensile fracture surface are in accordance with the tensile properties of these blends and composites. Thermogravimetric analysis and derivative thermogravimetry show that the thermal degradation of PVC/LDPE (20 wt%/80 wt%) blend and PVC/LDPE/DPLF (10 and 30 wt%) composites took place in two steps: in the first step, the blend was more stable than the composites. In the second step, the composites showed a slightly better stability than the PVC/LDPE (20 wt%/80 wt%) blend. Based on the above investigation, these new green composites (PVC/LDPE/DPLF) can be used in several applications. J. VINYL ADDIT. TECHNOL., 25:E88–E93, 2019. © 2018 Society of Plastics Engineers     

Observation of an Isokinetic Temperature and Compensation Effect for High-Temperature Crude Oil Fouling

The initial fouling rates of four crude oils were determined at a nominal bulk temperature of 315°C, an initial heated wall shear stress of 13 Pa, and initial surface temperatures between 375 and 445°C. These initial fouling rates ranged from 1.3(10^{? 6}) to 7.8(10^{? 5}) m² K/kJ. Corresponding Arrhenius plots were linear with the initial fouling rates passing through an isokinetic temperature of 407.5°C. A plot of the natural logarithm of the pre-exponential factors [7.6(10⁴)–5.2(10¹⁵) m² K/kJ] versus the apparent activation energies (128–269 kJ/mol) was also linear, confirming the validity of the isokinetic temperature and the presence of the compensation effect. Below the isokinetic temperature, the relative fouling rates were Crude Oil C > Crude Oil A > Crude Oil D > Crude Oil B; above the isokinetic temperature, the relative fouling rates were reversed (Crude Oil B > Crude Oil D > Crude Oil A > Crude Oil C). Chemical characterization of a fouling deposit suggested that the dominant fouling mechanism at these conditions was coking, with significant contributions from sedimentation (iron sulfide) and corrosion (～ 340 μ m/yr) of the 304 stainless steel test material.     

Trace elements in home-produced eggs in Belgium: Levels and spatiotemporal distribution

The purpose of this study was to evaluate the levels of arsenic, cadmium, lead, copper and zinc in home-produced eggs, soils and kitchen waste samples of private chicken owners in Belgium, and to determine spatiotemporal differences in trace element contents in eggs. Eggs were sampled in all provinces of Belgium in autumn 2006 and spring 2007. A total number of 59 private chicken owners participated in the study. Trace elements were determined by inductively coupled plasma-mass spectrometry except for mercury, which was determined by atomic absorption of mercury vapour. The mean fresh weight concentrations in eggs in autumn and spring respectively were < 8.0 and < 8.0 µg/kg for arsenic, 0.5 and < 0.5 µg/kg for cadmium, 116 and 74 µg/kg for lead, 0.43 and 0.52 mg/kg for copper, 20.3 and 19.2 mg/kg for zinc, and 3.15 and 4.44 µg/kg for mercury. Analysis of variance determined significant differences in some trace element concentrations in eggs among seasons and regions in Belgium. Average concentrations of arsenic, cadmium and mercury corresponded well with values measured in other countries, while copper and zinc concentrations were within the same order of magnitude as in other countries. Average lead concentrations were high compared to concentrations in eggs from other countries and correlated well with lead concentrations in soil, indicating that the soil is an important source. Other sources of trace elements in eggs might be home-grown vegetables and forage (grass and herbs), and indirectly, air pollution.     

Quantum-inspired design of resilient substitution boxes: From coding to hardware implementation

S-boxes constitute a cornerstone component in symmetric-key cryptographic algorithms, such as DES and AES encryption systems. In block ciphers, they are typically used to obscure the relationship between the plaintext and the ciphertext. Non-linear and non-correlated S-boxes are the most secure against linear and differential cryptanalysis. In this paper, we focus on a twofold objective: first, we evolve regular S-boxes with high non-linearity and low auto-correlation properties; then automatically generate evolvable hardware for the obtained S-box. Targeting the former, we use a quantum-inspired evolutionary algorithm to optimize regularity, non-linearity and auto-correlation, which constitute the three main desired properties in resilient S-boxes. Pursuing the latter, we exploit the same algorithm to automatically generate the evolvable hardware designs of substitution boxes that minimize hardware space and encryption/decryption time, which form the two main hardware characteristics. We compare our results against existing and well-known designs, which were produced by using conventional methods as well as through genetic algorithm. We will show that our approach provides higher quality S-boxes coding as well as circuits.