Extraction of iridium(III) by ion-pair formation with 2-octylaminopyridine in weak organic acid media

To extract iridium(III), various physicochemical parameters were studied. 2-Octylaminopyridine was used for the extraction of iridium(III) from acetate medium at 8.5 pH. Quantitative extraction of iridium(III) was achieved via ion-pair formation of cation [2-OAPH⁺] and anion [Ir(CH₃COO)₄]^?. The stripping of iridium(III)-laden organic phase was carried out 2 M HCl (3 × 10 mL) . The stoichiometry of the extracted ion–pair complex was found to be 1:4:1 (metal: acetate: extractant). The extracted species [2-OAPH⁺. Ir(CH₃COO)₄^?] is assumed to be an ion association product of [Ir(CH₃COO)₄] ^? and [2-OAPH]⁺. The proposed method was successfully used in the separation of iridium(III) from binary and ternary mixtures. Analysis of various alloy samples was also carried out.     

Eight mole percent yttria stabilized zirconia powders by organic precursor route

An organic precursor-mixing route has been developed for preparation of 8 mol% yttria stabilized zirconia (8YSZ) ceramics. Polymeric salt of succinic acid with yttrium and zirconium has been prepared separately by treating sodium succinate with yttrium chloride and zirconyl chloride followed by washing with water and drying at 120 °C. Thorough mixing of the two salts in stoichiometric proportions by planetary ball milling followed by calcination at 850 °C resulted in a precursor powder containing nanocrystalline (∼40 nm) monoclinic zirconia, tetragonal YSZ, cubic YSZ and yttria. Compacts prepared after deagglomeration of powder by planetary ball milling produce 8YSZ ceramics having density 99.3% TD on sintering at 1550 °C for 2 h.     

Influence of shear in the crystallization of polyethylene in the presence of SWCNTs

It is well accepted that due to epitaxy matching, carbon nanotubes are good nucleating agent for linear polyethylene. We demonstrate that not only in the quiescent conditions but also at the relatively low shear rates the presence of single-walled carbon nanotube (SWCNT) accelerates the crystallization kinetics of polyethylene (PE). The influence of SWCNTs on the crystallization kinetics in the quiescent condition is followed with the help of rheological and differential scanning calorimetry studies. The influence of flow on the stretch of the polymer chain is probed using time-resolved small-angle X-ray scattering (SAXS) and is verified with the Deborah number. SAXS data indicates that the strong shearing conditions (shear rate > 50/s for 1 s) are requisite to form shish-kebab structure in the neat polymer. However, for the low shear (shear rate < 50/s for 1 s), the shish-kebab structure that arises due to chain orientation is enhanced in the presence of SWCNTs. The development of oriented structures in SWCNT/PE composites and their absence in the neat polymer under low shear rate indicates that the presence of SWCNTs plays a significant role in the chain orientation. Overall, the results manifest the influence of SWCNTs on chain relaxation of the polymer.     

Agro-Waste Generated Pd/CAP-Ash Catalyzed Ligand-Free Approach for Suzuki–Miyaura Coupling Reaction

Catalysis Letters - We converted agro-waste Custard Apple Peels (CAP) to ash via thermal treatment, on which Pd(OAc)2 was immobilized easily that produced a low-cost, highly efficient Pd/CAP-ash...     

Electrochromic characteristics of fibrous reticulated WO3 thin films prepared by pulsed spray pyrolysis technique

The electrochromic (EC) behavior of fibrous reticulated WO₃ films prepared from ammonium tungstate precursor by pulsed spray pyrolysis method was investigated. All the films were prepared using identical technological parameters and a thorough investigation of the electrochromic properties of the films deposited at 300 °C is reported. The structural properties were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The electrochromic and optical properties were measured using cyclic voltammetry and ultraviolet (UV)-visible spectrophotometry. The films are amorphous and have a fibrous reticulate-like morphology having micron-size circular rings. The films show high transparency in the visible range and the optical band gap energy is about 3.1 eV. Electrical measurements show that the resistivity monotonically decreases as temperature increases, which indicates thermal hopping transport. The activation energy for hopping transport is of the order 4×10⁻⁴ eV. The electrochromic coloration efficiency (CE) is found to be 34 cm²/C at 630 nm.     

Geochemical evidences of trace metal anomalies for finding hydrocarbon microseepage in the petroliferous regions of the Tatipaka and Pasarlapudi areas of Krishna Godavari Basin, India

The long-term seepage of hydrocarbons, either as macroseepage or microseepage, can set up near-surface oxidation reduction zones that favor the development of a diverse array of chemical and mineralogical changes. The bacterial oxidation of light hydrocarbons can directly or indirectly bring about significant changes in the values of pH and Eh of the surrounding environment, thereby also changing the stability fields of the different mineral species present in that environment. The paper reports the role of hydrocarbon microseepage in surface alterations of trace metal concentrations. In this study trace metal alterations were mapped that appear to be associated with hydrocarbon microseepages in the oil/ gas fields. A total of 50 soil samples were collected near oil and gas fields of the Tatipaka and Pasarlapudi areas of the Krishna Godavari Basin, Andhra Pradesh. The soil samples were collected from a depth of 2-2.5 m. The paper reports the chemical alterations associated with trace metals in soils that are related to hydrocarbon microseepages above some of the major oil and gas fields of this petroliferous region. Trace metals, such as scandium (Sc), vanadium (V), chromium (Cr), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), barium (Ba) and strontium (Sr), in soil samples were analyzed using inductively coupled plasmamass spectrometry (ICP-MS). The concentrations of Sc (8 to 40 mg/kg), V (197 to 489 mg/kg), Cr (106 to 287 mg/kg), Co (31 to 52 mg/kg), Ni (65 to 110 mg/kg), Cu (88 to 131 mg/kg), Zn (88 to 471 mg/kg), Ba (263 to 3,091 mg/kg) and Sr (119 to 218 mg/kg) were obtained. It was observed that the concentrations of trace elements were tremendously increased when they were compared with their normal concentrations in soils. The analysis of adsorbed soil gas showed the presence of high concentrations of ΣC 2+ (C 2 H 6 , C 3 H 8 and n-C 4 H 10 ) ranging from 7 to 222 μg/kg respectively. Integrated studies of trace elements over adsorbed light gaseous hydrocarbons (ΣC 2+ ) anomalies showed good correlation with the existing oil and gas wells. The carbon isotopic composition of δ 13 C 1 of the samples ranges between -36.6‰ to -22.7‰ (Pee Dee Belemnite) values indicate thermogenic origin, which presents convincing evidence that the adsorbed soil gases collected from these sediments are of catagenetic origin. The increase in the concentrations of trace metals near oil/gas producing areas, suggests a soil chemical change to a reducing environment, presumably due to the influence of hydrocarbon microseepage, which could be applied with other geoscientific data to identify areas of future hydrocarbon exploration in frontier areas.     

A New Modified Compositional Viscosity Model for Medium-heavy Oils

Viscosity of heavy oils is a key parameter in designing potential enhanced oil recovery methods. The recently proposed semiempirical viscosity model by Lindeloff et al. (2004) Lindeloff, N., Pedersen, K. S., Rønningsen, H. P. and Milter, J. 2004. The corresponding states viscosity model applied to heavy oil systems.. J. Can. Pet. Technol., 43: 47–53. [Web of Science ®] , [Google Scholar] was studied in depth. This model is the simplest yet powerful tool for medium-heavy oil viscosities. Based on the analysis, appropriate adjustments have been suggested, with the major one being the division of the pressure-viscosity profile into three different regions. New modifications have improved the overall fit, including the saturated viscosities at low pressures. The %AAD for the data sets studied was found to be 1.37. However, with the limited geographically diverse data, it is not possible to make a comprehensive predictive model. A few limitations of the new model are also stated.     

Heat Transfer Analysis for Gas-to-Liquids Transportation Through Trans Alaska Pipeline

Gas-to-liquids (GTL) technology involves the conversion of natural gas to liquid hydrocarbons. In this article, theoretical studies have been presented to determine the feasibility of transporting GTL products through the Trans-Alaska Pipeline System (TAPS). To successfully transport GTL through TAPS, heat loss along the route must be carefully determined. This study presents heat transfer and fluid dynamic calculations to evaluate this feasibility. Because of heat loss, the fluid temperature decreases in the direction of flow and this affects the fluid properties, which in turn influence convection coefficient and pumping power requirements. The temperature and heat loss distribution along the pipeline at different locations have been calculated. Fairly good agreement with measured oil temperatures is observed. The powers required to pump crude oil and GTL individually, against various losses have been calculated. Two GTL transportation modes have been considered; one as a pure stream of GTL and the second as a commingled mixture with crude oil. These results show that the pumping power and heat loss for GTL are less than that of the crude oil for the same volumetric flow rate. Therefore, GTL can be transported through TAPS using existing equipment at pump stations.     

Analysis of Optimum Batch Size in Multistage,Multifacility and Multiproduct Manufacturing Systems

In any type of manufacturing environment the most common configuration will be a multistage, multiproduct, manufacturing inventory system. An in-process inventory is inherent in any multistage manufacturing system, when the product is manufactured through several operations and stages. To satisfy demand requirements in multistage, multiproduct manufacturing systems, it is important to specify feasible production quantities, as batch sizes for each end product, over a finite time period at every stage. This paper deals with different methods for determining batch sizes in a multiproduct, multistage situation in the presence of decision support systems for maximum capacity. The mathematical model suggested by Gunasekaren is considered as the basis for comparison. A fuzzy logic model of the above has been developed to calculate the economic batch sizes such that machine hour and labour productivity constraints are not violated. Using Promodel, a simulation technique, the model was subjected to variable analysis and cost analysis and the results were compared. Case studies were conducted for validating the models for their ability to produce reliable output. MATLAB software package is used for developing the program to solve the problem by fuzzy approximation.     

PressBase : a presentation synchronization database for distributed multimedia systems

Multimedia presentations are the basic objects of multimedia databases. Since a multimedia presentation is not an instant display of a query result, the control knowledge (or synchronization requirements) has to be incorporated into the database and necessary precautions have to be taken for a lengthy presentation. Active databases provide a mechanism for incorporation of control knowledge by using event-condition-action (ECA) rules. In this paper, we describe how multimedia synchronization can be handled within a database using ECA rules. We present a prototype presentation synchronization database, named as PressBase, for distributed multimedia systems. We have adopted one of the synchronization models, SynchRuler, and then incorporated into a relational database system.