制造业新生代产业工人满意度分析

以制造业中的新生代产业工人为研究对象，以激励理论中的赫茨伯格双因素理论为支撑，分析影响制造业中新生代产业工人满意度的影响因素。总结出影响度较大的因素，并从企业角度出发，探讨企业对这些因素的可控性，提出一些合理化建议，以期对制造业中新生代产业工人的有效管理提供帮助。     

Preparation,ablation behavior and mechanism of C/C-ZrC-SiC and C/C-SiC composites

ZrC precursor was synthesized by a solution approach using ZrOCl₂·8H₂O, acetylacetonate, glycerol and boron-modified phenolic resin. A ZrC yield of ~ 40.56 wt% was obtained at 1500 °C in the C/Zr molar ratio of 1:1. C/C-ZrC-SiC composites were fabricated by a combined processes of chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) using the synthesized ZrC precursor. For comparison, C/C-SiC composites were prepared by CVI. Thermogravimetric analysis showed that C/C-ZrC-SiC composites exhibited better oxidation resistance than C/C-SiC composites. After oxyacetylene torch ablation, the mass ablation rate of C/C-ZrC-SiC composites was 9.23% lower than that of C/C-SiC composites. The porous ZrO₂ skeleton in the ablation center was prone to be peeled off by the flame flow, resulting in the higher linear ablation rate of C/C-ZrC-SiC composites. The oxide layers of ZrO₂ and SiO₂ were formed on the transition and brim region of C/C-ZrC-SiC composites and acted as effective heat and oxygen barriers. For C/C-SiC composites, the C-SiC matrix was severely depleted in the ablation center and the formed SiO₂ layer in the brim region could protect the matrix against further ablation.     

Research on corrosion performance of 6061 aluminum alloy in salt spray environment

Salt spray corrosion test was carried out on 6061 aluminum alloy, and quasi-static tensile test at room temperature was carried out on the sample with universal testing machine. The effect of salt spray corrosion on the mechanical properties of 6061 aluminum alloy was studied by scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and electrochemistry. The corrosion rate of 6061 aluminum alloy was quantitatively characterized by different corrosion parameters. It was found that local corrosion of 6061 aluminum alloy occurred in salt spray environment, mainly pitting corrosion and intergranular corrosion. With the increase of corrosion time, the polarization resistance of 6061 aluminum alloy decreases, and the corrosion rate significantly increases. The average corrosion rate and the maximum corrosion rate of 6061 aluminum alloy were characterized by corrosion weight loss and corrosion pit depth. And they can be transformed into each other. The mechanical properties of 6061 aluminum alloy were mainly affected by the depth of corrosion pit. With the increase of corrosion time, the tensile strength and fracture strain decreased, resulting in poor plasticity of the sample. At the same time, the change of elongation of 6061 aluminum alloy can be accurately predicted by the depth of corrosion pit.     

600MW机组危急遮断装置故障分析与处理

针对漳山发电厂3号机组在汽轮机定速喷油试验时不成功的情况,分析了危急遮断装置存在的问题,提出了针对性的解决方法,从而提高了整个危急遮断装置的安全稳定性。     

Motivational,emotional, and behavioral correlates of fear of missing out

Social media utilities have made it easier than ever to know about the range of online or offline social activities one could be engaging. On the upside, these social resources provide a multitude of opportunities for interaction; on the downside, they often broadcast more options than can be pursued, given practical restrictions and limited time. This dual nature of social media has driven popular interest in the concept of Fear of Missing Out – popularly referred to as FoMO. Defined as a pervasive apprehension that others might be having rewarding experiences from which one is absent, FoMO is characterized by the desire to stay continually connected with what others are doing. The present research presents three studies conducted to advance an empirically based understanding of the fear of missing out phenomenon. The first study collected a diverse international sample of participants in order to create a robust individual differences measure of FoMO, the Fear of Missing Out scale (FoMOs); this study is the first to operationalize the construct. Study 2 recruited a nationally representative cohort to investigate how demographic, motivational and well-being factors relate to FoMO. Study 3 examined the behavioral and emotional correlates of fear of missing out in a sample of young adults. Implications of the FoMOs measure and for the future study of FoMO are discussed.     

Inverse Reconstruction of Fracture Splitting Connecting Rod and its Strength and Fatigue Life

Journal of Failure Analysis and Prevention - To investigate the strength and fatigue life of a fracture-split connecting rod, this study combines experiments on connecting rod fracture splitting,...     

Solidification microstructure characteristics of Ti–44Al–4Nb–2Cr–0.1B alloy under various cooling rates during mushy zone

Beta-solidifying TiAl alloy has great potential in the field of aero-industry as a cast alloy.In the present work,the influence of cooling rate during mushy zone on solidification behavior of Ti-44Al-4Nb-2Cr-0.1B alloy was investigated.A vacuum induction heating device combining with temperature control system was used.The Ti-44Al-4Nb-2Cr-0.1B alloy solidified from superheated was melted to β phase with the cooling rates of 10,50,100,200,400 and 700 K·min~(-1),respectively.Results show that with the increase in cooling rate from 10 to 700 K·min~(-1),the colony size of α_2/γ lamella decreases from 1513 to48 urn and the solidification segregation significantly decreases.Also the content of residual B2 phase within α_2/γlamellar colony decreases with the increase in cooling rate.In addition,the alloy in local interdendritic regions would solidify in a hypo-peritectic way,which can be attributed to the solute redistribution and enrichment of Al element in solidification.     

Soldering of Zr-based bulk metallic glass and copper by Au-12Ge eutectic alloy

Zr-based bulk metallic glass and copper with different surface roughness were soldered using low temperature eutectic Au-12 Ge(wt%) solder on a thermomechanical simulator. The cross-sectional microstructures of the brazed joints were analyzed by scanning electron microscopy(SEM) and transmission electron microscope(TEM) in detail, and the compositional distribution along the interface was analyzed by energy-dispersive spectrometer(EDS). Results show that the surface roughness of base metals plays an important role in the quality of the brazed joint because the surface roughness can enlarge the effective contact area, which can improve the brazing surface quality between two materials. A moderate roughness of treated Zr-based metallic glass of 18 μm is shown to be the best for the soldering, while the surface roughness has a weak effect on the soldering behavior of Au-12 Ge solder on copper. After soldering, long-range diffusion of atoms occurs between the base metal and solder, and five distinct regions are formed at the joint region.     

不同锰铬含量对贝氏体钢组织转变的影响

文章利用全自动相变仪对不同锰铬含量的贝氏体钢组织转变进行了试验研究,对比分析了不同锰铬元素含量对贝氏体钢过冷奥氏体相变点的影响,并研究了不同转变温度对贝氏体钢组织转变的影响,试验结果表明贝氏体钢组织转变的最佳温度为330℃,为贝氏体钢生产工艺开发提供了理论依据。     

Mechanical properties and miscibility of polyethersulfone/phenoxy blends

The blends of polyethersulfone and phenoxy were prepared by melt mixing in a Brabenderlike apparatus. The specimens for measurements were made by compression molding and then were water-quenched at room temperature under pressure. The tensile strength, tensile modulus, elongation at break and yield, density, thermal analysis, and dynamic mechanical properties were each measured. The dependence of tensile strength, tensile modulus, elongation at break and yield, and density on composition was obtained. The relationship between tensile modulus and elongation at break and yield and speed of the crosshead at different weight ratios of the blends is shown. The effects of composition and miscibility on the mechanical properties are discussed. © 1996 John Wiley & Sons, Inc.