Kinetics of CO2 reforming of methane by catalytically activated metallic foam absorber for solar receiver-reactors

Ni–Cr–Al metallic foam absorber with high porosity was catalytically activated using a Ru/γ-Al₂O₃ catalyst, and was subsequently tested with respect to CO₂ reforming of methane in a small-scale volumetric receiver-reactor by using a sun-simulator. A chemical storage efficiency of 37% was obtained for a mean light flux of 325 kW m⁻². Furthermore, the activity and the stability of the metallic foam absorber were compared with those of a SiC foam absorber activated with the same Ru/γ-Al₂O₃ catalyst for 50 h of light irradiation, and it was found that the metallic foam absorber has superior catalytic stability in comparison to the SiC form absorber. In addition, unlike ceramic foams such as SiC, metallic foams feature superior plasticity, which prevents the emergence of cracks caused by mechanical or thermal shock.     

An optoelectronic self-oscillatory circuit with an optical fiber delayed feedback and its injection locking technique

An optoelectronic self-oscillatory circuit with a constant time delay and its injection locking have been theoretically and experimentally described. The oscillation circuit incorporates a delayed feedback path by utilizing an optical fiber and is characterized by a differential-difference equation. The oscillation waveform and amplitude have been investigated by computing the equation. It is also shown that a stable frequency locking region exists and expands with an increase in the injection amplitude. By employing a carrier signal, two methods for optoelectronic oscillation, an AM and an FM type, are proposed and have been demonstrated to obtain more stable oscillation.     

Finite element incremental contact analysis with various frictional conditions

The use of contacting components such as gear teeth in mesh and shrink-fitted shafts is very common in engineering practice. This paper deals with the development of a theoretical method which gives a solution for non-linear contact problems with irreversibility resulting from stick-slip phenomenon. The method is based on the finite element method and load incremental theory. The geometrical and the statical boundary conditions on contact surfaces are treated as additional conditions being independent of stiffness equations. As a result, the algorithm of calculation is simplified and only a part of the simultaneous equations related to the contact surfaces is required to be solved instead of the overall stiffness equations at each step. Furthermore, the magnitude of load causing a change in a contact condition of one contact nodepair is taken as a load increment, in analogy with the incremental iterative procedure for elastic-plastic problems. Therefore, the method provides a general and efficient method for analysis and design of such problems. As illustrative examples, the stick-slip behaviour of turbo-alternator end-bells and other problems are discussed. The calculated results show a reasonable agreement with experimental data and other solutions.     

A note on upwinding and anisotropic balancing dissipation in finite element approximations to convective diffusion problems

In one dimension, Petrov—Galerkin nonsymmetric weighting for the convective diffusion equation can be interpreted as an added dissipation. The addition of an appropriate amount of dissipation can therefore give the same oscillation-free solutions as the ‘unwinding’, Petrov—Galerkin, finite element methods. The ‘balancing dissipation’ is optimally chosen so that excessive dissipation does not occur. A scheme is presented for extending this approach to two-dimensional problems, and numerical examples show that the new method can be used with improved computational efficiency.     

Cloning of a cDNA encoding the human transforming growth factor-beta type II receptor: heterogeneity of the mRNA

A combined study of anterograde axonal degeneration and Golgi electron microscopic technique was designed to examine the distribution and density of axon terminals from the mediodorsal thalamic nucleus (MD) over layer III pyramidal cells in the prelimbic cortex of the rat. The reconstructive analysis of serial ultrathin sections of gold-toned apical and basal dendrites of layer III pyramidal cells showed that degenerating thalamocortical axon terminals from MD formed asymmetrical synaptic contacts predominantly with dendritic spines of the identified basal dendrites as well as apical dendrites. There was little difference in the numerical density of thalamocortical synapses from MD per unit length of both apical and basal dendrites.     

Calibration of multiple kinects with little overlap regions

When using multiple Kinects, there must be enough distances among neighboring Kinects to avoid spoiled range data caused by the interference of their infrared speckle patterns. In the arrangement, their overlapped regions are too small to apply existing calibration methods using correspondences between their observations straightforwardly. Therefore, we propose a method to calibrate Kinects without large overlapped regions. In our method, first, we add extra RGB cameras in an environment to compensate overlapped regions. Thanks to them, we can estimate their camera parameters by obtaining correspondences between color images. Next, for accurate calibration, which considers range data as well as color images of Kinects, we optimize the estimated parameters by minimizing both the errors of correspondences between color images and those of range data of planar regions, which exist in a general environment such as walls and floors. Although our method consists of conventional techniques, its combination is optimized to achieve the calibration. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Ex Vivo Expanded and Activated Natural Killer Cells Prolong the Overall Survival of Mice with Glioblastoma-like Cell-Derived Tumors

Glioblastoma (GBM) is the leading malignant intracranial tumor and is associated with a poor prognosis. Highly purified, activated natural killer (NK) cells, designated as genuine induced NK cells (GiNKs), represent a promising immunotherapy for GBM. We evaluated the anti-tumor effect of GiNKs in association with the programmed death 1(PD-1)/PD-ligand 1 (PD-L1) immune checkpoint pathway. We determined the level of PD-1 expression, a receptor known to down-regulate the immune response against malignancy, on GiNKs. PD-L1 expression on glioma cell lines (GBM-like cell line U87MG, and GBM cell line T98G) was also determined. To evaluate the anti-tumor activity of GiNKs in vivo, we used a xenograft model of subcutaneously implanted U87MG cells in immunocompromised NOG mice. The GiNKs expressed very low levels of PD-1. Although PD-L1 was expressed on U87MG and T98G cells, the expression levels were highly variable. Our xenograft model revealed that the retro-orbital administration of GiNKs and interleukin-2 (IL-2) prolonged the survival of NOG mice bearing subcutaneous U87MG-derived tumors. PD-1 blocking antibodies did not have an additive effect with GiNKs for prolonging survival. GiNKs may represent a promising cell-based immunotherapy for patients with GBM and are minimally affected by the PD-1/PD-L1 immune evasion axis in GBM.     

Determination of bisphenol A in canned vegetables and fruit by high performance liquid chromatography

A high performance liquid chromatograph y (HPLC) method was developed for the determination of bisphenol A (BPA) that had migrated into canned fruit and vegetables. BPA was extracted with acetonitrile from the solid portion of canned food, and with an OASIS HLB cartridge from the aqueous portion, respectively. Both extracts were cleaned up on a Florisil cartridge. The HPLC separation was carried out on a Wakosil II 3C18 RS column (4.6 × 150mm) with acetonitrile-water (40:60, v/v) as a mobile phase with a flow rate of 0.8 ml/min. BPA was detectable by UV detector at 228 nm and determined with the similarity of chromatographic peak spectrum by multiwavelength detector (similarity index was 0.99 or above). The quantification limits were 10 ng/g for the solid portion and 5 ng/ml for the aqueous portion, respectively. BPA was mainly detected in the solid portion of canned food and found at the maximum level of 11 μg per can. To verify migration into the solid portion of canned food, a partitioning experiment was carried out.