Light‐Activated,Multi‐Semiconductor Hybrid Microswimmers

Using a dynamic fabrication process, hybrid, photoactivated microswimmers made from two different semiconductors, titanium dioxide (TiO₂) and cuprous oxide (Cu₂O) are developed, where each material occupies a distinct portion of the multiconstituent particles. Structured light‐activated microswimmers made from only TiO₂ or Cu₂O are observed to be driven in hydrogen peroxide and water most vigorously under UV or blue light, respectively, whereas hybrid structures made from both of these materials exhibit wavelength‐dependent modes of motion due to the disparate responses of each photocatalyst. It is also found that the hybrid particles are activated in water alone, a behavior which is not observed in those made from a single semiconductor, and thus, the system may open up a new class of fuel‐free photoactive colloids that take advantage of semiconductor heterojunctions. The TiO₂/Cu₂O hybrid microswimmer presented here is but an example of a broader method for inducing different modes of motion in a single light‐activated particle, which is not limited to the specific geometries and materials presented in this study.     

The Influence of Carbon Nitride Nanosheets Doping on the Crystalline Formation of MIL‐88B(Fe) and the Photocatalytic Activities

In this research, bulk graphitic carbon nitride (g‐C₃N₄) is exfoliated and transferred to the carbon nitride nanosheets (CNNSs), which are then coupled with MIL‐88B(Fe) to form the hybrid. From the results of the powder X‐ray diffraction, scanning electronic microscopy and thermogravimetric analysis, it is found that the doping of CNNSs on the surface of MIL‐88(Fe) could maintain the basic structure of MIL‐88B(Fe), and the smaller dimension of CNNSs might influence the crystallization process of metal‐organic frameworks (MOFs) compared to bulk g‐C₃N₄. Besides, the effects of the CNNSs incorporation on photocatalysis are also investigated. Through the photoluminescence spectra, electrochemical measurements, and photocatalytic experiments, the hybrid containing 6% CNNSs is certified to possess the highest catalytic activity to degrade methylene blue and reduce Cr(VI) under visible light. The improvement of the photocatalytic performance can be attributed to the matched energy level which favors the formation of the heterojunctions. Besides, it promotes the charge migration such that the contact between MOFs and CNNSs is more intimate, which can be inferred from the electronic microscopy images. Finally, a possible photocatalytic mechanism is put forward by the relative calculation and the employment of the scavengers to trap the active species.     

Highly Uniform Resistive Switching Properties of Solution‐Processed Silver‐Embedded Gelatin Thin Film

The silver‐embedded gelatin (AgG) thin film produced by the solution method of metal salts dissolved in gelatin is presented. Its simple fabrication method ensures the uniform distribution of Ag dots. Memory devices based on AgG exhibit good device performance, such as the ON/OFF ratio in excess of 10⁵ and the coefficient of variation in less of 50%. To further investigate the position of filament formation and the role of each element, current sensing atomic force microscopy (CSAFM) analysis as well as elemental line profiles across the two different conditions in the LRS and HRS are analyzed. The conductive and nonconductive regions in the current map of the CSAFM image show that the conductive filaments occur in the AgG layer around Ag dots. The migration of oxygen ions and the redox reaction of carbon are demonstrated to be the driving mechanism for the resistive switching of AgG memory devices. The results show that dissolving metal salts in gelatin is an effective way to achieve high‐performance organic–electronic applications.     

Green Synthesis of Hierarchically Porous Carbon Nanotubes as Advanced Materials for High‐Efficient Energy Storage

Hierarchically porous carbon nanomaterials with well‐defined architecture can afford a promising platform for effectively addressing energy and environmental concerns. Herein, a totally green and straightforward synthesis strategy for the fabrication of hierarchically porous carbon nanotubes (HPCNTs) by a simple carbonization treatment without any assistance of soft/hard templates and activation procedures is demonstrated. A high specific surface area of 1419 m² g^?1 and hierarchical micro‐/meso‐/macroporosity can be achieved for the HPCNTs. The unique porous architecture enables the HPCNTs serving as excellent electrode/host materials for high‐performance supercapacitors and Li–sulfur batteries. The design strategy may pave a new avenue for the rational synthesis of hierarchically porous carbon nanostructures for high‐efficient energy storage applications.     

Fabricating Ir/C Nanofiber Networks as Free‐Standing Air Cathodes for Rechargeable Li‐CO2 Batteries

Li‐CO₂ batteries are promising energy storage systems by utilizing CO₂ at the same time, though there are still some critical barriers before its practical applications such as high charging overpotential and poor cycling stability. In this work, iridium/carbon nanofibers (Ir/CNFs) are prepared via electrospinning and subsequent heat treatment, and are used as cathode catalysts for rechargeable Li‐CO₂ batteries. Benefitting from the unique porous network structure and the high activity of ultrasmall Ir nanoparticles, Ir/CNFs exhibit excellent CO₂ reduction and evolution activities. The Li‐CO₂ batteries present extremely large discharge capacity, high coulombic efficiency, and long cycling life. Moreover, free‐standing Ir/CNF films are used directly as air cathodes to assemble Li‐CO₂ batteries, which show high energy density and ultralong operation time, demonstrating great potential for practical applications.     

Nanoconfined Nickel@Carbon Core–Shell Cocatalyst Promoting Highly Efficient Visible‐Light Photocatalytic H2 Production

The realization of large‐scale solar hydrogen (H₂) production relies on the development of high‐performance and low‐cost photocatalysts driven by sunlight. Recently, cocatalysts have demonstrated immense potential in enhancing the activity and stability of photocatalysts. Hence, the rational design of highly active and inexpensive cocatalysts is of great significance. Here, a facile method is reported to synthesize Ni@C core–shell nanoparticles as a highly active cocatalyst. After merging Ni@C cocatalyst with CdS nanorod (NR), a tremendously enhanced visible‐light photocatalytic H₂‐production performance of 76.1 mmol g^?1 h^?1 is achieved, accompanied with an outstanding quantum efficiency of 31.2% at 420 nm. The state‐of‐art characterizations (e.g., synchrotron‐based X‐ray absorption near edge structure) and theoretical calculations strongly support the presence of pronounced nanoconfinement effect in Ni@C core–shell nanoparticles, which leads to controlled Ni core size, intimate interfacial contact and rapid charge transfer, optimized electronic structure, and protection against chemical corrosion. Hence, the combination of nanoconfined Ni@C with CdS nanorod leads to significantly improved photocatalytic activity and stability. This work not only for the first time demonstrates the great potential of using highly active and inexpensive Ni@C core–shell structure to replace expensive Pt in photocatalysis but also opens new avenues for synthesizing cocatalyst/photocatalyst hybridized systems with excellent performance by introducing nanoconfinement effect.