A study of the corrosion properties of plasma nitrocarburized and oxidized AISI 1020 steels

Plasma nitrocarburized AISI 1020 steels were oxidized for 15, 30 and 60 min to evaluate their corrosion and microstructural properties. After plasma nitrocarburizing for 3 h at 570°C in a gas mixture comprising 85 vol.% N₂, 12vol.% H₂ and 3 vol.% CH₄, the compound layer composed of ɛ-Fe_2–3(N,C) and γ’-Fe₄(N,C) phases and the diffusion layer above the matrix were observed. The top oxide layer, consisting mainly of magnetite (Fe₂O₄) and hematite (Fe₂O₃) phases, forms after post-oxidation treatment at 500°C. However, the oxide layer was severely degraded by spallation as a result of increases in post-oxidizing time. The difference in corrosion resistance should be attributed to the thickness of the top oxide layer, which was governed by post-oxidizing time.     

Numerically optimal design for the system with coupled complex transport phenomena-application to the Submerged Entry<Emphasis Type="Italic">Nozzle</Emphasis> in continuous slab caster

This study presents a simple and robust algorithm for the optimal design of the system with coupled complex transport phenomena: the transport phenomena comprise fluid flow, heat and mass transfer. The (1+1)-Evolution Strategy method is adopted as the optimization method. In order to analyze the transport phenomena in the complex geometry generated during the optimization procedure, thefinite volume method with a boundary fitted curvilinear coordinate system is used. To confirm the validity of the present method, the optimal design for the inner shape of the simplified two-dimensionalSubmerged Entry Nozzle in the continuous slab caster is conducted. It is shown that the resulting design of the nozzle is consistent with the purpose and constraints of the design.     

Control of NO x emissions from diesel engine by selective catalytic reduction (SCR) with urea

Topics in Catalysis - Among the catalysts screened, Cu-ion exchanged ZSM5 zeolite exhibited the highest NO removal activity, particularly at low reaction temperatures below 200&nbsp;°C,...     

APPLICATION OF THE CONSTANT MOLAR FLOW METHOD IN THE STUDY OF MASS TRANSFER OF GASES AND VAPORS IN BIDISPERSE STRUCTURED SOLIDS

In this paper, we provide exact analytical solutions for a new method of constant molar flow of pure gas into a reservoir containing solid adsorbents having a bidispersed structure, such as zeolite, activated carbon and alumina. Depending on the diffusion mechanism, two models are proposed under the isothermal conditions and linear isotherm. One is applicable to zeolite, and the other for alumina and activated carbon. The solutions of these two models are in the form of an infinite series, and its eigenvalues are determined from a transcendental equation. This transcendental equation is such that the eigenvalues are lumped into infinite but countable groups, and in each group there are infinite but countable eigenvalues. The dominant eigenvalues are generally the first ten to thirty eigenvalues (depending on the value of time at which the series is evaluated) in each group. The pressure response of the reservoir is a function of time as the result of the introduction of adsorbate into the reservoir, and as time is sufficiently large it asymptotes to a straight line, of which the slope is a function of the equilibrium parameters only and the intercept is found to be an explicit function of the equilibrium parameters as well as the diffusivities in the macropore and micropore.     

The structure of model coatings: latex-bound plastic pigment coatings

The immobilization and consolidation of model coatings based on monodisperse polystyrene (plastic pigment) and S/B latexes of known particle sizes were studied in terms of their packing volumes and the extent of latex shrinkage, which was found to increase with increasing pigment volume up to the critical pigment volume concentration (CPVC). The maximum latex shrinkage was estimated from the CPVC. Then, the porosity of model coatings was calculated based on three proposed latex shrinkage models: maximum, minimum, and linearly decreasing latex shrinkage. The number of pores and the average equivalent spherical pore diameters were subsequently calculated. The opacity and gloss of model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. The CPVC values determined by the opacity, gloss, and porosity versus PVC relationships, respectively, agreed very well with each other. The CPVCs determined by the opacity and porosity versus PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the linearly decreasing value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. Additionally, a minimum crack-free temperature (MCFT) of latex-bound coatings was proposed to better predict the behaviors of latexes as pigment binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

Development of bond strength model for FRP plates using back‐propagation algorithm

For the flexural reinforcement of bridge and building structure, synthetic materials whose dynamic properties are superior and those containing the merit of corrosion‐proof are widely used as the substitute for a steel plate. Since FRP plate has improved bond strength owing to the fibers externally adhering to the plate, many researches regarding the bond strength improvement have been substantially performed. To search out such bond strength improvement, previous researchers had ever examined the bond strength of FRP plate through their experiment by setting up many variables. However, since the experiment for a research on the bond strength takes much of expenditure for setting up the equipment and is time‐consuming, also is difficult to be carried out, it is limitedly conducted. The purpose of this study was to develop the most suitable artificial neural network model by application of various neural network models and algorithm to the data of the bond strength experiment conducted by previous researchers. Many variables were used as input layers against bond strength: depth, width, modulus of elasticity, tensile strength of FRP plate and the compressive strength, tensile strength, and width of concrete. The developed artificial neural network model has been applied back‐propagation, and its error was learned to be converged within the range of 0.001. Besides, the process for the over‐fitting problem has been dissolved by Bayesian technique. The verification on the developed model was executed by comparison with the test results of bond strength made by other previous researchers, which was never been utilized to the learning as yet. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 5119–5127, 2006     

New Process for the Preparation of Monodispersed, Spherical Silica Particles

A new method is presented for preparing highly monodispersed silica particles using a two-stage semibatch/batch hydrolysis reaction of Si(OC₂H₅)₄. The slower rate of hydrolysis of the tetraethylorthosilicate (TEOS) that occurred during the semibatch process resulted in larger silica particles with a higher yield and narrower size distribution. This was in direct contrast to the batch process. In addition, the ability of four different mixed processes to produce silica particles with good packing density, narrower particle-size distribution, and higher yield were evaluated. These were batch/batch (B-B), batch/semibatch (B-S), semibatch/batch (S-B), and semibatch/semibatch (S-S) processes. The S-S system produced the largest particles with the highest yields. The size of the silica particles obtained by the S-B method decreased with increasing reaction time, while the particles obtained by the B-S process had the best particle-size distribution and packing density. In conclusion, a mixed batch/semibatch system was the best way to produce an extremely narrow particle-size distribution and a good packing density.