DCS在酸相法氯化聚乙烯生产中的应用

把DCS应用于酸法生产CPE中，描述了DCS的硬件配制，生产中的控制要点及自控方案，在工业化生产中取得了良好效果。     

State space approximation for general fractional order dynamic systems

Approximations for general fractional order dynamic systems are of much theoretical and practical interest. In this paper, a new approximate method for fractional order integrator is proposed. The poles of the approximate model are unrelated to the order of integrator. This feature shows benefits on extending the algorithm to the systems containing various fractional orders. Then a unified approximate method is derived for general fractional order linear or nonlinear dynamic systems via combining the proposed new method with the distributed frequency model approach. Numerical examples are given to show the wide applicability of our method and to illustrate the acceptable accuracy for approximations as well.     

Coordinating efficiency and equity in disaster relief logistics via information updates

This paper addresses a multi-supplier, multi-affected area, multi-relief, and multi-vehicle relief allocation problem in disaster relief logistics. A multi-objective optimisation model based on disaster scenario information updates is proposed in an attempt to coordinate efficiency and equity through timely and appropriate decisions regarding issues such as vehicle routing and relief allocation. An optimal stopping rule is also proposed to determine the optimum period of delay before responding to disaster, because decision making requires accurate disaster information. The main contribution of this paper is solving relief allocation problem in a novel way by correlating operational research with statistical decision making and Bayesian sequential analysis. Finally, a case is presented based on the post-disaster rescue in Eastern China after supertyphoon Saomai to test the applicability and show the potential advantages of the proposed model.     

焦化柴油不安定因素考察

对焦化柴油的不安定因素进行了研究.通过研究发现,焦化柴油中的酸性物质、碱性物质、微量金属及可见光均是影响焦化柴油安定性的因素,空气对焦化柴油的安定性影响较小.     

Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

高支模施工安全管理问题与对策

高支模工程安全管理不仅需要很高的技术,而且安全管理本身也具有较大的随机性,这就导致相关人员在开展安全管理工作时具有一定的难度。面对这一问题,相关监理人员必须从施工方案的审批、应急预案的落实、质量安全作业的施工技术交底和施工过程中所需要的各种原材料进场前的检验等方面加强管理。     

简论电力财务预算管理与风险管理的关系

电力是现代社会生活、生产的重要能源之一。在电力行业不断发展进步的今天,由于其预算管理已无法满足时代要求,风险管理存在诸多漏洞,导致电力企业的发展受到一定的阻碍。这就需要我们充分分析电力企业的财务预算管理与风险管理的关系,并妥善处理二者间的问题,从而规避企业财务风险。     

程控多路宽电压通道切换电路设计

为克服传统校验方法的不足,简化自动化测试设备的面板设计和校验过程,基于单片机技术和RS-422通信接口,设计了一种程控多路宽电压通道切换电路。介绍了电路工作原理、元器件选择、软硬件设计过程。该电路已经在多台测试设备的校验环节得到应用,工作性能稳定。     

基于Push-Model的遥感生态产品生产监控的设计与实现

针对生态环境遥感产品生产系统的架构,结合遥感生态产品的特点,提出了以多线程方式为运行机制的Push-Model的产品生产监控系统,用以实时、有效地对产品生产过程进行进度监控和人工交互消息的控制。生产监控系统的实现与运行,证实了该方案下产品生产监控信息的实时性及人工交互消息控制的有效性。