Anodic Dissolution of Uranium Mononitride in Lithium Chloride-Potassium Chloride Eutectic Melt

Uranium-plutonium nitride is a candidate fuel for fast reactors, but its major drawback is ¹⁴C formation from natural nitrogen. One would probably have to use highly ¹⁵N-enriched nitrogen. A pyrochemical process with molten-salt electroreflning has been proposed as a means to increase the nuclear proliferation resistance of the fuel cycle. Molten-salt electroreflning could also be applied to nitride fuels to make possible the recycling of ¹⁵N. The anodic dissolution behavior of UN in LiCI-KCI melt was studied to provide the basis for a feasibility study of electroreflning of irradiated nitride fuels.     

Influence of tetraalkylammonium cations on the electroreduction of nickel(II) in thiocyanate solutions

Influence of tetrabutyl-, tetrapentyl- and tetraisopentylammonium ions on the reduction of nickel(II) in thiocyanate solutions at the dropping mercury electrode has been investigated. These tetraalkylammonium ions, at their low concentrations, inhibit the reduction of nickel(II). However, at their high concentrations, the strong inhibiting effect disappers with the formation of a new wave corresponding to the reduction of a negatively charged nickel(II) thiocyanate complex, which is stabilized by the formation of ion pair with tetraalkylammonium cation. The variation of the reduction current with tetraalkalylammonium concentration was explained by taking into consideration both the change of the total charge of nickel(II) thocyanate complex involved in the reduction process and the simultaneous adsorption of tetraalkylammonium and thiocyanate ions on the mercury electrode.     

Change of polypropylene film surface by chromic acid mixture treatment

Polypropylene films were treated with chromic acid mixture. The change in the treated films was investigated by comparing change in amount of 2,4-dinitrophenylhydrazones formed in the treated films with their change in wettability with water. Oxidation of the film surface zone, partial breakdown of polymer in the film surface zone, and oxidation of surface zone bared from the film inner zone seemed to occur with increase in treatment time or with increase in treatment temperature.     

Preparation of Silicon Carbide and Aluminum Silicon Carbide from a Montmorillonite–Polyacrylonitrile Intercalation Compound by Carbothermal Reduction

Both silicon carbide and aluminum silicon carbide have simultaneously been obtained directly from naturally occurring aluminosilicate by carbothermal reduction for the first time. A precursor of a montmorillonite–polyacrylonitrile (PAN) intercalation compound was heated at 1700°C in Ar. For comparison, montmorillonite–carbon mixtures were similarly heated. α-SiC, β-SiC, and Al₄Si₂C₅ formed from the montmorillonite–PAN intercalation compound. Mainly α-Al₄SiC₄ was obtained with ternary carbides from the montmorillonite–carbon mixtures in addition to a large amount of β-SiC. Hence, aluminum silicon carbide formation was affected by the mixing condition of the starting materials.     

Guinea pig bone marrow cells treated with platelet-activating factor generate factor(s) which affects their DNA synthesis and microbicidal activity

We have previously reported that platelet-activating factor (PAF) induces proliferation and microbicidal activity of guinea pig bone marrow cells. In the present study, we have found that the conditioned medium of PAF- or nonmetabolizable PAF agonist-treated guinea pig bone marrow cells augmented DNA synthesis and induced microbicial activity of bone marrow cells. A PAF specific antagonist, CV-6209, inhibited generation of the active conditioned medium by PAF. Addition of the PAF antagonist only partially suppressed the augmentative effect of the active conditioned medium on DNA synthesis; this is consistent with the fact that, because of the rapid breakdown, no appreciable amount of PAF remained in the conditioned medium of PAF-treated cells. Although mouse bone marrow cells did not respond to PAF unlike guinea pig cells, their DNA synthesis was significantly enhanced by the conditioned medium of PAF-treated guinea pig bone marrow cells. Thus, some newly generated factor(s) distinct from the originally inoculated PAF seemed to modulate the bioactions of PAF on bone marrow cells. An appreciable amount of PAF was produced by calcium ionophore-treated guinea pig bone marrow cells. These findings indicate that PAF synthesized in guinea pig bone marrow cells induces generation in the cells of some factor(s) which affects proliferation or microbicidal activity. Presented at The Third International Conference on Platelet-Activating Factor and Structurally Related Ether Lipids, Tokyo, Japan, May 1989.     

Evaluation of the agronomic effectiveness of natural and partially acidulated phosphate rocks in several soils using32P isotopic dilution techniques

The agronomic effectiveness of two natural phosphate rocks (PRs) from North Carolina (USA) and Togo and their 50% partially acidulated products (PAPRs) was evaluated in two greenhouse experiments using³²P isotopic dilution techniques, namely L and A_L values.In the first experiment rye grass was grown in a soil from Ghana. While the proportion of P in the plant derived from the P fertilizer (Pdff) ranged on. the average from about 10% for the PRs up to 80% for the PAPRs, the P fertilizer recovery was less than 1% for a 60-day growth period. In the second experiment, average values of P in the maize plants derived from the PAPRs ranged from 35% to 75% in 3 different soils. Both PRs were ineffective with the exception of North Carolina PR in the Seibersdorf soil. The P fertilizer recovery was 0.25% for the North Carolina PR in this soil whereas the recovery values ranged from 1.2% to 1.6% for the PAPRs.Mean values of the relative fertilizer efficiency estimated from the L values of each soil were less than 1% for the PRs whereas the values for the PAPRs which were dependent on soil type ranged from 20% up to 45%. The coefficient of relative effect of partial acidulation, that was calculated from the ratio of A_L values for PR and PAPR in each soil indicated that partial acidulation increased the effectiveness of the natural PRs in all soils under study.This study showed that the use of³²P isotope dilution techniques allows an accurate measurement of the P availability from natural and modified PR products to crops. Another advantage is that quantitative comparison of the P sources under study, PRs and PAPRs in this case, can be made even in soils where there is no response to the applied P sources.     

Novel synthesis of microcrystalline titanium(IV) oxide having high thermal stability and ultra-high photocatalytic activity: thermal decomposition of titanium(IV) alkoxide in organic solvents

Thermal decomposition of titanium(IV) tetra-tert-butoxide (TTB) in inert organic solvents at 573 K yielded microcrystalline anatase (titanium(IV) oxide, TiO₂) powders with a crystallite size of ca. 9 nm and a surface area of <100 m² g^-1. Primary and secondary alkoxides of titanium(IV), however, were not decomposed under similar conditions, indicating that the thermal stability of C-O bonds in the alkoxides was a decisive factor for their decomposition. The TiO₂ prepared from TTB by this manner was thermally stable upon calcination in air and retained high surface area of ca. 100 m² g^-1 even after calcination at 823 K. The as-prepared TiO₂ powders, without calcination, exhibited much higher rate of carbon dioxide formation than any other active photocatalysts such as Degussa P-25 and Ishihara ST-01 in the photocatalytic mineralization of acetic acid in aerated aqueous solutions. The higher activity of the present TiO₂ photocatalysts is attributed to both high crystallinity and large surface of the present product. The calcination of the as-prepared TiO₂ in air reduced the photocatalytic activity, but it was still higher than the other commercially available TiO₂'s. This revised version was published online in July 2006 with corrections to the Cover Date.     

Reaction products of α-tocopherol with methyl linoleate-peroxyl radicals

α-Tocopherol was reacted with methyl linoleateperoxyl radicals at 37°C. The peroxyl radicals were generated by the reaction of methyl linoleate with a free radical initiator, 2,2′-azobis(2,4-dimethylvaleronitrile). The primary products of α-tocopherol with methyl linoleate-peroxyl radicals were isolated by reversephase and normal-phase high performance liquid chromatography (HPLC), and their structures were characterized by ultraviolet (UV), infrared (IR),¹H and¹³C nuclear magnetic resonance (NMR) and mass spectrometry (MS). There were four stereoisomers of methyl 13-(8a-peroxy-α-tocopherone)-9(Z),11(E)-octadecadienoate and four stereoisomers of methyl9-(8a-peroxy-α-tocopherone)-10(E),12(Z)-octadecadienoate.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Properties of conductive films made from fine spherical silver-palladium alloy particles

Silver-palladium alloy films were made by a thick-film technique using several metal powders prepared by the spray-pyrolysis method. Two types of powders were used: silver-palladium alloy powders (15 mol % Pd and 30 mol % Pd) and mixtures of silver and palladium powders. The fired films were about 2–3 m in thickness. The alloy particles sintered uniformly in firing, whereas, in the case of the powder mixtures, the alloying of silver and palladium particles caused uneven particle growth and large voids were formed in the fired films. For this reason the films made from the alloy powders had better conductive properties than those made from the powder mixtures. The resistivities of the films made from the alloy powders were close to the intrinsic value for silver-palladium alloys. Further, the oxidation of palladium during heating in air was significantly suppressed in the alloy powders when the palladium content was lower than 30 mol % in accordance with thermodynamic considerations.