Safety evaluation of rechargeable cells with lithium metal anodes and amorphous V2O5 cathodes

Rechargeable cells with lithium metal anodes have a very large theoretical energy density and are a promising cell system. However, rechargeable lithium metal cells are not yet currently commercially available. One of the biggest problems with the cells is the poor safety aspect resulting from the high chemical reactivity of lithium. We have been studying a cell system consisting of an amorphous (a-)V2O5P2O5 (95:5 in molar ratio) cathode, a lithium (Li) metal anode and an organic electrolyte in fabricating an AA-size prototype. In this paper, we report recent progress on our rechargeable lithium metal cell focusing on its safety.     

Coupled simulation of BES-CFD and performance assessment of energy recovery ventilation system for office model

Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recovery ventilator and to investigate the effect of the air supply arrangement. Three types of mixing ventilation are chosen for the analysis of coupling ANSYS/FLUENT (a computational fluid dynamics (CFD) program) with TRNSYS (a building energy simulation (BES) software). The adoption of mutual complementary boundary conditions for CFD and BES provides more accurate and complete information of indoor air distribution and thermal performance in buildings. A typical office-space situated in a middle storey is chosen for the analysis. The office-space is equipped with air-conditioners on the ceiling. A heat recovery ventilation system directly supplies fresh air to the office space. Its thermal performance and indoor air distribution predicted by the coupled method are compared under three types of ventilation system. When the supply and return openings for ventilation are arranged on the ceiling, there is no critical difference between the predictions of the coupled method and BES on the energy consumption of HVAC because PID control is adopted for the supply air temperature of the occupied zone. On the other hand, approximately 21% discrepancy for the heat recovery estimation in the maximum between the simulated results of coupled method and BES-only can be obviously found in the floor air supply ventilation case. The discrepancy emphasizes the necessity of coupling CFD with BES when vertical air temperature gradient exists. Our future target is to estimate the optimum design of heat recovery ventilation system to control CO₂ concentration by adjusting flow rate of fresh air.     

Ketones from carboxylic acids over supported magnesium oxide and related catalysts

Silica-supported alkaline earth oxides revealed excellent activity to convert acetic acid selectively into acetone in a vapor-phase fixed-bed flow system. Acetone was obtained through the cyclic formation of alkaline earth acetate followed by decomposition. Magnesium oxide should be supported on the silica surface without formation of magnesium silicate, which was inactive for the present reaction. Attempted syntheses of benzophenone and acetophenone are also described.     

Effects of hydrophilicity of crosslinker on membrane properties of poly(N-hydroxyethyl-L-glutamine) hydrogels

Summary Poly(N-hydroxyethyl-L-glutamine) (PHEG) hydrogels were prepared by aminolysis of poly( -benzyl L-glutamate) with 2-aminoethanol and hydrophobic or hydrophilic crosslinkers, and the effect of the hydrophobicity of the crosslinkers was evaluated. The swelling properties, tensile properties and enzymatic degradation behavior were studied in phosphate buffered saline (PBS). The swelling ratio and degradation rate of these hydrogels were highly dependent on the hydrophobicity of the crosslinkers, while tensile properties were dependent on the swelling ratio, but not on the hydrophobicity of the crosskinkers.     

Incorporation of Dust Particles into a Growing Film During Silicon Dioxide Deposition from a TEOS/O2 Plasma

The effects of gas flow rate on particle formation and film deposition during the preparation of silica thin film using a TEOS/O₂ plasma were investigated. Particle formation and growth are suppressed with increasing gas flow rates. The film deposition rate increases with increasing gas flow rate, reaches a maximum value, and eventually decreases again. However, the uniformity of the film tends to degrade at high gas flow rates. At a high gas flow rate, some particles trapped in the sheath near the grounded electrode pass through the sheath to reach the substrate and are then embedded in the growing film. A self-consistent sheath model combined with particle force balance based on charge fluctuation was developed to explain these experimental findings qualitatively. The model reveals that charge fluctuation is a key factor for the particle to overcome the potential barrier of the negatively charged particles to pass through the sheath, eventually reaching the substrate. The model further shows that the probability of a particle being deposited on the substrate is higher for increased gas flow rates, which correctly predicts the experimentally observed trend.     

Homogeneous Tritylation of Cellulose in A Sulfur Dioxide – Diethylamine – Dimethyl Sulfoxide Medium

The present investigation was undertaken to see if a practical method could be developed for homogeneous tritylation of cellulose in a non-aqueous solvent of cellulose. Our new procedure of tritylation of cellulose can easily be carried out under homogeneous conditions by dissolving cellulose in a sulfur dioxide(SO₂)-diethylamine (DEA)-dimethyl sulfoxide(DMSO) solvent system, one or the non-aqueous cellulose solvents, followed by addition of trityl chloride and pyridine. This new method can avoid the time consuming pretreatment for the decrystallization of cellulose which has been necessary in the traditional procedure and can lower the reaction temperature. IR spectra of the products indicated the formation of trityl cellulose. Measurements of dielectric properties of the products confirmed that trityl groups were selectively introduced at the primary hydroxyl groups in cellulose. This conclusion was also confirmed by a H-NMR study in which the tritylated products was first acetylated, detritylated and then trideuterioacetylated and H-NMR spectra were taken at each stage and examined comparatively.     

SPRAY DRYING CHARACTERISTICS BY A CENTRIFUGAL PRESSURE NOZZLE WITH LARGE ORIFICE DIAMETER

A study was made of a centrifugal pressure nozzle with large orifice diameter (8-10 nun) for producing dry milk in capacity of 2-3 tons per hour to develop some performance data on spray distribution, drop size distribution, and capacity with changing spray drying conditions such as nozzle pressure, orifice diameter and spray angle.

Experimental results were shown as follows.

(1) A centrifugal pressure nozzle of large capacity such as 5,000- 5,500 l/hr at 150 kg/cm2 spray pressure and 110°s ray angle was designed by using the nozzle parameter Si/dedi√di/di.

(2) Atomization characteristics were greatly affected by the ratio of orifice diameter (de) to the length (L) of the nozzle core. The smaller the ratio, around 0.125, the better are the atomizing effects.

(3) The large orifice can be used at least 3,000 hr in the spray drying operation for milk without any wear in the orifice although it is only made of stainless steel.

As a result, a spray dryer of large capacity for dry milk has been operated by a mono nozzle with a large orifice without any trouble for a long time     

Ozone Generator with Cylindrical Type of Rotating Electrode

An ozone generator using a rotating electrode to improve ozone generation efficiency is proposed. The ozone generator electrode unit consists of a rotating electrode and fixed electrode. The rotating electrode has the grounded 36 pieces of tungsten wires fixed in parallel to the rotation axis on the rotating cylinder surface. A dielectric electrode is used as a fixed electrode located on the inside of the tube of the electrode unit. The width of the apparent discharge gap is 1mm. Alternating current with a frequency of 50 Hz is applied to the electrode unit. The rotation speed can be adjusted from 0 rpm to 1200 rpm by a variable speed motor. Oxygen gas is used as the material gas. Higher ozone concentration and higher ozone generation efficiency are obtained compared with that when the rotation speed is 0 rpm. The gas temperature is measured at the inlet and outlet of the ozone generator, and the rotation speed for the cooling effect is most effective at about 500 rpm. The maximum generation efficiency is estimated to be 61 g/kWh at 800 rpm, and this value is twice as large as in the case of 0 rpm.     

Characterization of temporal response, spectral responsivity and its spatial uniformity in photoconductive diamond detectors

Three photoconductive diamond detectors with highly oriented diamond (HOD) films fabricated by the same process were characterized with respect to temporal response, spectral responsivity and its spatial uniformity over the wavelength range from 190 to 250 nm. Temporal measurements showed a drift in the baseline, suggesting the presence of deep level carrier traps. The responsivity of specimen No. 2 was more than twice those of the other two specimens, but it showed an unpredictable current fluctuation. It was found that the spatial uniformities of all the specimens were too low for radiometric purposes. A prominent peak, thought to be due to photoemission, was found in the responsivity spatial distribution of specimen No. 3 under a negative applied voltage.     

Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).