Analysis of PD-generated SF/sub 6/ decomposition gases adsorbed on carbon nanotubes

Chemical byproducts analysis has been recognized as a powerful diagnosis method for SF₆ gas-insulated switchgear (GIS). The authors have previously demonstrated that a carbon nanotube (CNT) gas sensor could detect partial discharge (PD) generated in SF₆ gas. However, PD-generated decomposition gas species, which were responsible for the CNT gas sensor response, have not been identified yet. In this paper, two kinds of experiments were conducted in order to identify the responsible decomposition gas species. At first, the decomposition gas molecules adsorbed on CNTs were analyzed by Fourier transformation infrared (FTIR) spectroscopy. FTIR absorbance was observed around 735 cm^-1 after CNTs were exposed to PD generated in SF₆. In the second experiment, the CNT gas sensor responses to typical SF₆ decomposition products (HF and SF₄) were examined. The CNT gas sensor responded to these gases in the same way as to PD generated in SF₆. SF₄ response was larger than HF response. Based on these results, SF ₄ and SOF₂ emerged as candidates for the responsible decomposition gases. Electrochemical interactions between adsorbed gas molecules and CNT were discussed based on theoretical predictions of molecular orbital calculations. The calculation results suggested that both of SOF₂ and SF₄ could increase the CNT gas sensor conductance     

Impurity effect on Kramer-Pesch core shrinkage ins-wave vortex and chiralp-wave vortex

The low-temperature shrinking of the vortex core (Kramer-Pesch effect) is studied for an isolated single vortex for chiral p-wave and s-wave superconducting phases. The effect of nonmagnetic impurities on the vortex core radius is numerically investigated in the Born limit by means of a quasiclassical approach. It is shown that in the chiral p-wave phase the Kramer-Pesch effect displays a certain robustness against impurities owing to a specific quantum effect, while the s-wave phase reacts more sensitively to impurity scattering. This suggests chiral p-wave superconductors as promising candidates for the experimental observation of the Kramer-Pesch effect.     

Work-time optimal k-merge algorithms on the PRAM

For 2⩽k⩽n, the k-merge problem is to merge a collection of ksorted sequences of total length n into a new sorted sequence. The k-merge problem is fundamental as it provides a common generalization of both merging and sorting. The main contribution of this work is to give simple and intuitive work-time optimal algorithms for the k-merge problem on three PRAM models, thus settling the status of the k-merge problem. We first prove that Ω(n log k) work is required to solve the k-merge problem on the PRAM models. We then show that the EREW-PRAM and both the CREW-PRAM and the CRCW require Ω(log n) time and Ω(log log n+log k) time, respectively, provided that the amount of work is bounded by O(n log k). Our first k-merge algorithm runs in Θ(log n) time and performs Θ(n log k) work on the EREW-PRAM. Finally, we design a work-time optimal CREW-PRAM k-merge algorithm that runs in Θ(log log n+log k) time and performs Θ(n log k) work. This latter algorithm is also work-time optimal on the CREW-PRAM model. Our algorithms completely settle the status of the k-merge problem on the three main PRAM models     

HSPF Simulation of Runoff and Sediment Loads in the Upper Changjiang River Basin, China

To evaluate the performance of a computer model simulating runoff and sediment load in the upper region of the Changjiang (Yangtze River) basin over a relatively short time interval, including examining the applicability of the input precipitation data generated from global circulation models and satellite data, we used a spatially distributed model, HSPF with the International Satellite Land Surface Climatology Project (ISLSCP) precipitation data for 1987 and 1988 as input data. The Nash–Sutcliffe coefficient (R2) for 5-day average streamflow was 0.94 in the calibration period and 0.95 in the verification period for the whole upper region. Moreover, the model simulated the 5-day average streamflow well in each main tributary, as shown by R2 values of 0.46–0.96, except that it underestimated the peak flow rates during the flood season over 2 years by up to 71% in Tuojiang and 61% in Jialingjiang. The model simulated the 5-day concentrations of suspended solids (SS) fairly well in the headwaters and upper regions of the Jinshajiang, Yalongjiang, and Minjiang watersheds, as shown by R2 values of 0.31–0.65. In the other regions, however, the model underestimated the SS load by up to 72%, and rarely simulated the fluctuation of SS concentration in each river channel during the flood season. These errors led to the underestimation of sediment runoff volume from the whole upper region during the flood season, as shown by the ratio of the simulated sediment load to the observed data at Yichang: 0.69 in the calibration period and 0.68 in the verification period. The ISLSCP precipitation tended to be more frequent and less intense than the measured precipitation. This was probably the main reason why the HSPF did not perform well in all regions at all times.     

Expression of fibrogenic cytokines in desmoplastic malignant melanoma

OBJECTIVE: Research has confirmed substantial links between OCD and AN. Not only are there psychopathological similarities between the two syndromes, but a marked neurochemical correspondence. Extensive exercising is a common feature of AN and also has relevance in its links with OCD. There is evidence from the exercise-induced weight-loss syndrome in animals that exercise and caloric restriction, in combination, tend to increase serotonergic activity in a synergistic manner. This syndrome has been proposed as a valid model of OCD as well as for AN. To date, little research has directly tested this theory in the human condition. METHOD: Fifty-three AN patients were categorized as high-level exercisers (N = 22) or moderate/nonexercisers (N = 31) based on the frequency of their physical activity over the year before assessment. RESULTS: Exercisers scored significantly higher on a measure of OC personality characteristics, OC symptomatology, and perfectionism--a personality factor associated with the development of Obsessive-Compulsive Personality Disorder. On the other hand, there were no group differences on other salient eating disorder characteristics such as body esteem, self-esteem, or weight preoccupation. There were also no differences in degree of emaciation as indicated by Body Mass Index. CONCLUSIONS: Findings suggest that among AN patients obsessional personality characteristics are linked to high-level exercising, and that exercising is associated with a greater degree of OC symptomatology. Results are discussed in the context of current theories of AN, OCD, and some biological mechanisms.     

Bone Tissue Engineering in Rat Calvarial Defects Using Induced Bone-like Tissue by rhBMPs from Immature Muscular Tissues In Vitro

This study aimed to induce bone-like tissue from immature muscular tissue (IMT) in vitro using commercially available recombinant human bone morphogenetic protein (rhBMP)-2, rhBMP-4, and rhBMP-7, and then implanting this tissue into a calvarial defect in rats to assess healing. IMTs were extracted from 20-day-old Sprague-Dawley (SD) fetal rats, placed on expanded polytetrafluoroethylene (ePTFE) with 10 ng/μL each of rhBMP-2, BMP-4, and BMP-7, and cultured for two weeks. The specimens were implanted into calvarial defects in 3-week-old SD rats for up to three weeks. Relatively strong radiopacity was observed on micro-CT two weeks after culture, and bone-like tissue, comprising osteoblastic cells and osteoids, was partially observed by H&E staining. Calcium, phosphorus, and oxygen were detected in the extracellular matrix using an electron probe micro analyzer, and X-ray diffraction patterns and Fourier transform infrared spectroscopy spectra of the specimen were found to have typical apatite crystal peaks and spectra, respectively. Furthermore, partial strong radiopacity and ossification were confirmed one week after implantation, and a dominant novel bone was observed after two weeks in the defect site. Thus, rhBMP-2, BMP-4, and BMP-7 differentiated IMT into bone-like tissue in vitro, and this induced bone-like tissue has ossification potential and promotes the healing of calvarial defects. Our results suggest that IMT is an effective tissue source for bone tissue engineering.     

The influence of feed supply time on the fatty acid profile of Nile tilapia (Oreochromis niloticus) fed on a diet enriched with n-3 fatty acids

The purpose of the study was to examine the fatty acid profiles of Nile tilapia (Oreochromis niloticus) submitted to different feeding times (0, 10, 20 and 30 days) on a diet enriched with n-3 fatty acids, by addition of flaxseed oil in substitution for sunflower oil. The main fatty acids detected were palmitic (C16:0), stearic (C18:0), oleic (C18:1n9), linoleic (C18:2n6) and -linolenic (C18:3n3) in all the treatments. The 30 day-fed fish presented the best values for total n-3 fatty acids, with a prominence of -linolenic acids, showing that the flaxseed oil as well as the feed supply time influenced the fatty acid profiles.     

Calculation of the uniform breakdown field strength of SF6 gas

We calculated the uniform dielectric breakdown field strength of SF₆ gas over the temperature range of 300 to 3000 K. The local thermal equilibrium (ITE) composition of the dissociated gas is connected to the electron impact collision cross sections of the species SF₆, F₂, F and S. The critical reduced electric field strength of the composition is determined by a balancing electron generation and loss modeled by chemical reactions evaluated by the electron energy distribution function (EEDF) derived from the Boltzmann transport equation. At room temperature, pure SF₆ has a critical reduced electric field strength of 362 Td. With increasing temperature and decreasing density we found a small decrease of this value, whereas at temperatures higher than 1500 K, dissociation starts to decrease the dielectric strength of the composition. Furthermore, we found that generation of electrons by (associative) detachment from F ^- starts to play an important role at temperatures >2500 K, where the critical field strength still has a value of 118 Td. This value is found to decrease rapidly afterwards with increasing temperature to the value of 38 Td at 3000 K. The calculated results agree very well with independently predicted values and measured data     

Coupled simulation of BES-CFD and performance assessment of energy recovery ventilation system for office model

Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recovery ventilator and to investigate the effect of the air supply arrangement. Three types of mixing ventilation are chosen for the analysis of coupling ANSYS/FLUENT (a computational fluid dynamics (CFD) program) with TRNSYS (a building energy simulation (BES) software). The adoption of mutual complementary boundary conditions for CFD and BES provides more accurate and complete information of indoor air distribution and thermal performance in buildings. A typical office-space situated in a middle storey is chosen for the analysis. The office-space is equipped with air-conditioners on the ceiling. A heat recovery ventilation system directly supplies fresh air to the office space. Its thermal performance and indoor air distribution predicted by the coupled method are compared under three types of ventilation system. When the supply and return openings for ventilation are arranged on the ceiling, there is no critical difference between the predictions of the coupled method and BES on the energy consumption of HVAC because PID control is adopted for the supply air temperature of the occupied zone. On the other hand, approximately 21% discrepancy for the heat recovery estimation in the maximum between the simulated results of coupled method and BES-only can be obviously found in the floor air supply ventilation case. The discrepancy emphasizes the necessity of coupling CFD with BES when vertical air temperature gradient exists. Our future target is to estimate the optimum design of heat recovery ventilation system to control CO₂ concentration by adjusting flow rate of fresh air.     

A new approach to calculating core losses in the SRM

In switched reluctance motors (SRM), the flux waveforms are nonsinusoidal and different parts of the magnetic circuit have different waveforms. This paper presents a new approach of taking account of these flux waveforms in the calculation of core losses. Relations between the fluxes of different parts of the magnetic circuits are given in the form of matrix equations, where the fluxes are expressed in terms of normalized flux pulses. Rewriting the eddy-current loss term in the Steinmetz equation in terms of the square of dB/dt and combining it with the matrix equations, eddy-current losses for the complicated flux waveforms of the stator and rotor yokes are calculated. The effect of PWM is taken into account by considering the PWM voltage waveform as dB/dt. From the matrices, it is easy to count how many times full and minor hysteresis loops occur at each pole and yoke segment. The effect of the minor loop is taken into account based on experimental results. The proposed approach gives a systematic procedure for core loss calculation. The derived equations are simple and useful in the design of SRM