Sustainable biocarbon as an alternative of traditional fillers for poly(butylene terephthalate)-based composites: Thermo-oxidative aging and durability

Sustainable biocomposites have gained considerable interest as an alternative to conventional composites in recent years due to their cost-effectiveness and environmental friendliness. The aim of this study was to investigate the performance and durability behavior of biocomposites from sustainable biocarbon (BC) as compared to conventional established fillers. The poly(butylene terephthalate) (PBT) and its composites reinforced with BC, talc, and glass fiber (GF) were prepared and the durability performances was investigated. The study showed that BC/PBT biocomposites provided a lighter weight alternative to traditionally used fillers. After undergoes thermo-oxidative aging, the mechanical properties of BC/PBT biocomposite were deteriorated. The GF/PBT showed the most stable in retaining its mechanical properties in comparison to the talc/PBT and BC/PBT. The aging behavior and mechanism of the PBT composites were discussed. This study provides further insight on the durability-related properties progression of biocomposites as compared to traditional used fillers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47722.     

A partial Granger causality based method for analysis of parameter interactions in bioreactors

In this article, we utilize the concept of partial Granger causality to study the penicillin production process under several operating conditions. We propose a graph-theoretic template (causal network) based method for intelligent process monitoring. We validate our results with the aid of existing knowledge and available literature. The proposed method is quite general and can be extended to analyze several physical, chemical or biological systems.     

The Effects of Process Engineering on the Performance of PLA and PHBV Blends

The effects of process engineering in the fabrication of PHBV, PLA and their blends prepared by melt blending are studied. The elongation of an optimized blend can be improved by 148 and 250% over the virgin PHBV and PLA polymers, respectively. DSC shows that the two polymers are immiscible in blends of any composition. The crystallinity of PHBV is hindered by the presence of PLA. UV‐Vis demonstrates the opacity of the blend with incorporation of PHBV to the PLA phase. The observed tensile modulus of the optimized sample is compared with theoretical values from the rule of mixtures. Gordon‐Taylor's equation is applied on the glass transition temperatures for theoretical modeling to explain the miscibility of the polymers.

     

Mechanical Performance of Soy‐Hull‐Reinforced Bioplastic Green Composites: A Comparison with Polypropylene Composites

A blend composition of poly(3‐hydroxybutyrate‐co‐valerate) and polylactide is used as a bioplastic matrix and reinforced with soy hull to engineer novel green composites. A comparative study with soy‐hull‐reinforced polypropylene composite system is performed. A compatibilizer is used to engineer the novel class of green composites with a balanced stiffness and toughness performance with the target to substitute PP‐based composites. The flexural and impact strength along with hydrophobicity of compatibilized composites are improved significantly over the noncompatibilized counterpart. The fiber/matrix interaction is investigated by SEM. These green composites have the potential to substitute PP‐based composites in some applications.

     

Mechanophysical Cues in Extracellular Matrix Regulation of Cell Behavior

The extracellular matrix (ECM) is a macromolecular network that can provide biochemical and structural support for cell adhesion and formation. It regulates cell behavior by influencing biochemical and physical cues. It is a dynamic structure whose components are modified, degraded, or deposited during connective tissue development, giving tissues strength and structural integrity. The physical properties of the natural ECM environment control the design of naturally or synthetically derived biomaterials to guide cell function in tissue engineering. Tissue engineering is an important field that explores physical cues of the ECM to produce new viable tissue for medical applications, such as in organ transplant and organ recovery. Understanding how the ECM exerts physical effects on cell behavior, when cells are seeded in synthetic ECM scaffolds, is of utmost importance. Herein we review recent findings in this area that report on cell behaviors in a variety of ECMs with different physical properties, i.e., topology, geometry, dimensionality, stiffness, and tension.     

Preface to the Special Issue on “Heterogeneous Photocatalysts: From Fundamentals to Innovative Applications”

Topics in Catalysis -     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Hydrogen peroxide sensing properties of PVA/TiO2/I2 nanocomposite‐based free standing membranes

The nanocomposite of titanium‐di‐oxide (TiO₂)/iodine (I₂) in polyvinyl alcohol (PVA) matrix has been explored to be used in hydrogen peroxide (H₂O₂) sensing applications for the first time. The proposed nanocomposite can be easily casted in the form of thin film on glass substrates as well as free standing membranes. These nanocomposite films and membranes exhibit reduced resistance values and easily observable colour changes in the presence of H₂O₂. The films also exhibit significant quenching in photoluminescence emission properties upon H₂O₂ exposure. These sensor responses have been attributed to redox reactions at nanocomposite films and H₂O₂ interface. This study indicates an easy to fabricate, flexible and environmental friendly sensing platform for H₂O₂. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42257.     

Sinterability of Forsterite Prepared via Solid‐State Reaction

In this work, the sinterability of forsterite powder synthesized via solid‐state reaction was investigated. X‐ray diffraction (XRD) analyses indicate that the synthesized powder possessed peaks that correspond to stoichiometric forsterite. Scanning electron micrographs revealed that the powders were formed agglomerates, which were made up of loosely packed fine particles. Subsequently, the forsterite powders were cold isostatically pressed into a disk shape under 200 MPa and sintered in air at temperature ranging from 1200°C to 1500°C (interval of 50°C) with ramp rate of 10°C/min and dwelling time of 2 h. The sinterability of each sintered samples was examined in terms of phase stability, relative density, Vickers hardness, fracture toughness, and microstructural examination. XRD examination on all the sintered samples exhibited pure forsterite, in which the generated peaks were found to be in a good agreement with JCPDS card no. 34‐0189. The densification of forsterite progressed to reach a maximum relative density of ~91% at 1500°C. This study also revealed that high‐strength forsterite ceramic can be synthesized via solid‐state reaction as forsterite attained favorable mechanical properties, having fracture toughness of 4.88 MPam^1/2 and hardness of 7.11 GPa at 1400°C.     

Color preferences for different topics in connection to personal characteristics

Studies on color preferences are dependent on the topic and the relationships with personal characteristics, particularly personality, but these are seldom studied in one population. Therefore a questionnaire was collected from 1095 Dutch people asking for color preferences about different topics and relating them to personal characteristics. Color preferences regarding different topics show different patterns and significant differences were found between gender, age, education and personality such as being technical, being emotional or being a team player. Also, different colors were mentioned when asked for colors that stimulate to be quiet, energetic, and able to focus or creative. Probably, due to unconsciousness of contexts, many people had no color preference, a result that in the literature seldom is mentioned. Blue was the overall favorite color; however, most males chose for blue (25%) while most females had no color preference (18%). Black was the overall favorite color for clothing, mainly chosen by females (40%), while males primarily chose blue (27%). For building interiors subjects preferred white. For moods, subjects preferred white for being quiet or being able to focus, red for being energetic and had no color preference for being creative. It is concluded that color preferences are dependent upon the topic, and personal characteristics. The findings are important for architects, interior designers, fashion designers and product designers to have a basic idea of preferred colors for different objects by different types of people. © 2013 Wiley Periodicals, Inc. Col Res Appl, 40, 62–71, 2015