Several Geotechnical Design and Construction Issues with Akashi Strait Bridge

The Akashi Kaikyo (Strait) Bridge, one of the major bridges of the Honshu-Shikoku bridge network connecting the main island and the Shikoku island, is the world's longest suspension bridge with a center span of about 2,000 m. The bridge was constructed over the Akashi Strait and opened to traffic in 1998 after a construction period of about 10 years. The granite stratum in the Akashi Strait was very deep, while the granite stratum provides the foundations for the other long span bridges which have been constructed in Japan. Three of the four foundations had to be constructed on either a weakly cemented gravelly soil deposit or a sedimentary soft rock layer. The geological structure was carefully investigated and the geotechnical properties, in particular the strength and deformation characteristics of these geomaterial types, were carefully evaluated. To this end, a comprehensive series of advanced triaxial compression (TC) tests were performed on rotary core tube samples of sedimentary soft rock after it was found that the due design was not possible based on unconfined compression tests. Both CD and CU TC tests and cyclic undrained triaxial tests were performed on rotary core tube samples (30 cm in dia.) of the gravelly soil. Based on the data, the long-term and seismic stabilities of the foundations were evaluated. The importance of strain- and pressure-dependent nonlinear stress-strain behaviour at small strains, as well as accurate strain measurements in the laboratory stress-strain tests, was confirmed by analyzing the full-scale behaviour of the foundation during and after construction and comparing the back-calculated stiffness values with those obtained from laboratory stress-strain tests, pressure-meter tests, plate loading tests and field shear wave velocity measurements.     

Mechanical and physical characteristics of cellulose‐fiber‐filled polyacetal composites

We investigated the mechanical and physical characteristics of composites composed of polyacetal [alternatively called polyoxymethylene (POM)] and cellulose fiber (CelF) derived from wood pulp [10–52 wt % (9.3–50.1 vol %)] without any fiber surface treatment. The modulus, deflection temperature under load, and thermal conduction coefficient of the POM/CelF composites were effectively enhanced with increasing CelF content, and the composites had an advantage of specific modulus compared to glass fiber (GF)‐filled POM. The flexural modulus of POM/CelF 40 wt % (38.2 vol %) was measured to be about 6 GPa, which was comparable to that of POM/GF 20 wt % (12.1 vol %). In the composites, the CelFs were distributed randomly as monofilaments, and the debonding of the interface between the fibers and POM matrices in the fracture faces was confirmed as less by scanning electron microscopy observation. The POM/CelF composites possessed lower specific wear rates than the POM/GF composites, and they had damping behaviors near that of neat POM. No clear dependence of the melt flow index of the base POM on these characteristics was observed, except on Charpy impact strength. The composites studied here were unique in their performance and ability to be designed in accordance with specific demands, and they could be potential replacements for mineral‐filled and GF‐filled POM composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Combined γ-ray irradiation-activated sludge treatment of humic acid solution from landfill leachate

Humic acid, which is a typical microbially refractory organic substance, was extracted from a landfill leachate. The humic acid solution (COD = 367 mg 1⁻¹; TOC = 293 mg 1⁻¹; BOD = 27 mg 1⁻¹) was applied to a batch scale activated sludge treatment after the modification of its biodegradability by γ-ray irradiation. The BOD increased to 64 mg 1⁻¹ by irradiation of 15 kGy (1.5 Mrad), while the COD and TOC decreased to 231 and 230 mg 1⁻¹, respectively. When the irradiated sample was treated with an activated sludge, the BOD decreased rapidly in 2–3 h to about 15 mg 1⁻¹ which was a similar value as the unirradiated sample was treated. The elimination efficiency of TOC by the sludge treatment was approximately equal to that obtained by irradiation of 15 kGy. These facts suggest a utility of applying microbial processes after radiation treatment of microbially refractory wastewaters.     

Environmental protection: researches in National Institute of Radiological Sciences

Some studies for radiological protection of the environment have been made at the National Institute of Radiological Sciences (NIRS). Transfer of radionuclides and related elements has been investigated for dose estimation of non-human biota. A parameter database and radionuclide transfer models have been also developed for the Japanese environments. Dose (rate)-effect relationships for survival, growth and reproduction have been investigated in conifers, Arabidopsis, fungi, earthworms, springtails, algae, duckweeds, daphnia and medaka. Also genome-wide gene expression analysis has been carried out by high coverage expression profiling (HiCEP). Effects on aquatic microbial communities have been studied in experimental ecosystem models, i.e., microcosms. Some effects were detected at a dose rate of 1 Gy day(-1) and were likely to arise from interspecies interactions. The results obtained at NIRS have been used in development of frameworks for environmental protection by some international bodies, and will contribute to environmental protection in Japan and other Asian countries.     

Prediction of spinal cord ischemia with a retrievable stent graft on endovascular treatment for a case of thoracic aortic aneurysm

OBJECTIVE: To determine the pharmacokinetics and absolute bioavailability of ciprofloxacin in 12 critically ill patients receiving continuous enteral feeding. Design: a prospective, cross-over study. SETTING: 12-bed surgical intensive care unit in a University Hospital. PATIENTS: 12 stable critically ill patients on mechanical ventilation and receiving continuous enteral feeding (Normoreal fibres) without diarrhea or excessive residual gastric contents ( < 200 ml/4 h). None had gastro-intestinal disease, renal insufficiency (estimated creatinine clearance > or = 50 ml/min) or was receiving medications that could interfere with ciprofloxacin absorption or metabolism. MEASUREMENTS AND MAIN RESULTS: The study was carried out after the fourth (steady state) b. i. d. intravenous (i. v.) 1-h infusion of 400 mg and the second b. i. d. nasogastric (NG) dose of 750 mg (crushed tablet in suspension). Plasma concentrations were measured by high-performance liquid chromatography. The median (range) peak concentration after i. v. infusion was 4.1 (1.5-7.4) mg/l, and that after NG administration was 2.3 (0.7-5.8) mg/l, occurring 1.25 (0.75-3.33) h after dosing. The median [range] areas under plasma concentration-time curves were similar for the two administration routes (10.3 [3.3-34.6] and 8.4 [3.6-53.4] for i.v. infusion and NG administration, respectively). Ciprofloxacin bioavailability ranges from 31 to 82 % (median, 44%). CONCLUSIONS: In tube-fed critically ill patients, a switch to the NG ciprofloxacin after initial i. v. therapy to simplify the treatment of severe infections is restricted to those for whom serial assessments of ciprofloxacin levels are routinely available.     

The Effects of Conventional Stabilizers and Phenol Compounds Used as Antioxidants on the Stabilization of Nitrocellulose

The thermal behavior of nitrocellulose (NC) containing diphenylamine (DPA), 2‐nitrodiphenylamine (2‐NO₂‐DPA), N‐nitrosodiphenylamine (N‐NO‐DPA), ethyl centralite (EC), akardite II (AKII), 1,1,3‐tri‐(2‐methyl‐4‐hydroxy‐5‐tert‐butyl‐phenyl)‐butane (BP_less), 3‐(3,5‐di‐tert‐butyl‐4‐hydroxy‐phenyl)‐propionic acid octadecyl ester (BP_hin), and 3‐(3‐tert‐butyl‐4‐hydroxy‐5‐methyl‐phenyl)‐propionic acid 2‐(9‐{2‐[3‐(3‐tert‐butyl‐4‐hydroxy‐5‐methyl‐phenyl)‐propionyloxy]‐1,1‐dimethyl‐ethyl}‐2,4,8,10‐tetraoxa‐spiro [5.5] undec‐3‐yl)‐2‐methyl‐propyl ester (BP_semi) was observed during isothermal storage at 393 K using a C80 microcalorimeter. The results indicate that each stabilizer decreased NC's maximum heat release rate and increased the induction period of heat release. We also observed that the maximum heat release rate and the induction period were dependent on the amount of stabilizer. DPA decreased the maximum heat release rate to the greatest extent, with the other stabilizers having similar effects on the decrease of maximum heat release rate. AKII prolonged the induction period of heat release most. The order of prolongation of the induction period was AKII>2‐NO₂‐DPA≈DPA>N‐NO‐DPA≈EC>BP_less≈BP_semi≈BP_hin.     

Premixed flame propagating into a narrow channel at a high speed, part 2: Transient behavior of the properties of the flowing gas inside the channel

The behavior of a premixed flame propagating from a chamber into a narrow channel at a high speed was examined using high speed and instantaneous schlieren photography, ion current measurement with electrostatic probes, and temperature measurement with an optical method. From detailed measurements of flames passing through the channel, flame extinguishment in the channel, no matter whether transient or not, was found to occur due to quenching of the reacting gas by rapid turbulent mixing with cold fresh mixture at the downstream of the contraction region and by heat transfer to the cold channel walls. Extinguishment must occur when these heat losses exceed the heat released by the chemical reaction of the flowing mixture.     

The heat transfer and pressure drop characteristics of finned tube banks in forced convection (effects of fin height on pressure drop characteristics)

In recent years the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. For example, in the power generation field, as thermal power generation occupied 60% of the power generation demand, considerable improvement of the thermal efficiency is required. This paper describes the pressure drop characteristics of finned tube banks used for heat exchangers in thermal power generation that were clarified by testing serrated finned tube banks with different fin heights for improved heat transfer and conventional spiral finned tube banks with different fin heights, and an equation to predict pressure drop which is necessary for the heat exchanger design is proposed. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(3): 179–193, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20112     

Enhancing heat transfer ability of drag reducing surfactant solutions with static mixers and honeycombs

Solutions containing drag reducing additives also show reduced heat transfer which limits their use in district heating and cooling recirculation systems where heat exchange is critical. In this study, static mixers A and B and honeycombs were installed at the entrance to a heat exchanger to break the solution microstructure temporarily and thereby enhancing their heat transfer ability when passing through the heat exchanger. The effectiveness of the destructive devices in enhancing the heat transfer ability of drag reducing cationic and mixed zwitterionic/anionic surfactant solutions was investigated together with the microstructure recovery time and pressure drop penalty paid for the heat transfer enhancement.