Effective phase correction function for high-resolution exit wave reconstruction by a three-dimensional Fourier filtering method

The phase correction function used in the three-dimensional Fourier filtering method (3D-FFM) for compensating lens aberrations was investigated to reconstruct a high-resolution exit wave of a sample. An appropriate function, which hardly suffered from imperfect illumination conditions, was determined by comparing two types of phase correction functions with numerical calculations and experiments using through-focus images of an amorphous thin film and a [110]-oriented Si single crystal taken under tilted illumination or partially coherent illumination. Theoretical calculations indicated that a function in terms of w (an axial Fourier component), available uniquely in the 3D Fourier space, compensated for the phase shift due to the spherical aberration more precisely than did a conventional function in terms of g (the two-dimensional (2D) planar Fourier components). Experimentally, exit waves reconstructed using the w-function showed sample structures at approximately 20% higher resolution than those reconstructed using the g-function. Image contrast simulations proved that the w-function had a significant advantage over the g-function: the former canceled out the effect of illumination divergence, resulting in a high-resolution exit wave. These results demonstrated that exit waves, which are uniquely realized in the 3D-FFM, should be reconstructed using the w-type phase correction function.     

Formation of refractory ring-expanded triazine intermediates during the photocatalyzed mineralization of the endocrine disruptor amitrole and related triazole derivatives at UV-irradiated TiO2/H2O interfaces

Amitrole (ATz, 3-amino-1H-1,2,4-triazole) is a widely employed herbicide with strong estrogenic activity that can lead to abnormalities of the thyroid gland and can cause mutations. The photocatalytic transformation of ATz was carried out at the UV-irradiated TiO2/H2O interface, along with the triazole derivatives Tz (1H-1,2,4-triazole) and DaTz (3,5-diamino-1H-1,2,4-triazole) to assess the decomposition of these herbicides, to identify intermediates, and to elucidate some mechanistic details of the ATz degradation. Conversion of the nitrogens of these triazoles to NH4+ and/ or NO3- ions occurs competitively and depends on the number of amine functions on the five-membered triazole rings. Photomineralization of the substrates in terms of loss of nitrogen to NH4+/NO3- was rather low (ca. 25-40%) for each of the triazoles, whereas evolution of CO2 (loss of TOC) was more significant (60-70%), indicating considerable retention of nitrogen in the intermediate products. UV-Vis spectroscopy, TOC assays, FT-IR spectroscopy, proton NMR spectrometry, electrospray LC-MS, and molecular orbital calculations were brought to bear in assessing the temporal course of the photocatalyzed process(es). Results show that after cleavage of the triazole ring, the various intermediate fragments recombine to yield ring-expanded six-membered triazine intermediates, which slowly degrade to give the refractory cyanuric acid under the conditions used.     

The effect of cold working on creep rupture properties for helium-injected austenitic stainless steel

In order to study the effect of helium on the high temperature embrittlement of stainless steel, helium $\text{(7.5 × 10}{}^{\mathrm{?6}}\text{atomic fraction)}$ was injected into cold-worked stainless steels by using a cyclotron. At 650°C, it appeared that the reduction in creep-rupture strength due to helium was larger as cold-working was increased, but a loss of rupture elongation was less for a particular degree of cold-working. The 10% cold-worked material showed particularly good creep-rupture properties in the presence of helium. The loss of ductility was more pronounced in the creep test than in the tensile test.     

Threshold voltage of ion implanted GaAs MESFET

Threshold voltages for ion implanted GaAs MESFETs are measured and shown to have good coincidence with calculated results. The effect of implantation energy on threshold voltage is discussed. The optimum implantation energy is about 45 ~ 60 keV.     

Cryogenic STM/STS observation on oxide superconductors

The topographic and electronic properties of the surfaces of (001) and (110) oriented YBa₂Cu₃O_y, epitaxial films have been probed by atomic resolution STM/STS at 4.2 K. The STM image on the (001) surface clearly revealed the atomic corrugation of the tetragonal lattice with an average spacing of 0.4 nm. while on the (110) surface the orthorhombic atomic lattice, corresponding to the Cu atoms of both CuO₂ and CuO chain planes, was observed. The STS result on the (001) surface indicated the semiconducting nature of the terminating layer. As the tunneling tip came closer to the surface, however, the shape of the tunneling spectrum became more metallic and showed a superconducting energy gap, which seems to arise from the underlying superconducting layer. On the other hand, the tunneling spectra on the (110) surface indicated superconducting gap structures, independent of the tip-sample distance.     

Phosphatidylserine specific binding protein in rat brain: purification and characterization

A calcium-independent phosphatidylserine specific binding protein detected on liposome blotting analysis was purified from rat brain and revealed to be identical to myristoylated, alanine-rich C kinase substrate (MARCKS). MARCKS specifically binds to phosphatidylserine but not phosphatidylcholine. The binding of MARCKS to phosphatidylserine was abolished on protein kinase C-dependent phosphorylation. Since bacterially expressed MARCKS also specifically binds to phosphatidylserine, myristoylation of the N-terminal glycine seems not to be essential for the binding of MARCKS to phosphatidylserine. These data suggest that phosphatidylserine is a membranous target molecule of MARCKS.     

Neoadjuvant intraarterial chemotherapy for ten cases of inflammatory breast cancer by Seldinger's methods

The conventional methods (CM) of intraarterial (IA) chemotherapy for inflammatory breast cancer were catheterizations from superior epigastric and brachial artery under general anesthesia. Since 1997, we selected the Seldinger's methods (SM) for ten cases of the disease to control local effects and simplify the technique. Complications of the SM were slight, and side effects were equal to those with CM. The postoperative pathological findings of the SM showed the direct effects of chemotherapy to tumor cells (degenerative and necrotic changes) as compared with the embolism-like effects of CM. But the overall histological effects of chemotherapy by SM were almost equal to those for CM. The strong points of the SM were as follows: 1) More selective IA chemotherapy is available, 2) one can find the passage of the aim vessels and no trouble related to catheter, 3) general anesthesia is not necessary, and the techniques are simple, 4) the wounds are not remarkable. The disadvantages are as follows: 1) Patients must rest the day of IA chemotherapy, 2) in 20% of the procedures, one can not search the vessels, and 3) in 4 cases complications of stiffness of Mj or Mn pectral muscles were found. In future, we expect more effective results by dose escalation or combination chemotherapy.     

Radioactivation of structural material of the superconducting magnet for a fusion reactor

Radioactivation of five types of candidate steel alloys for the structural materials of superconducting toroidal field coils (TFC) of a D-T fusion reactor has been comparatively studied. As a result, the use of a high Mn steel in place of 316 SS is shown to reduce the dose rate at the He vessel of the TFC to ～ 1/3 the value with 316 SS at 1 day after shutdown, and to ～ 1/1000 at 10 years after shutdown. These reductions are mostly caused by the 0.28 wt% Co assumed to be included in 316 SS but none in the high Mn steel. Newly defined dose rate sensitivities of constituent elements are shown to be useful in identifying the cause of dose rate change brought on by the steel composition change. They can also be utilized in estimating the dose rate change brought on by the replacement of 316 SS with any new steel alloy with similar composition.     

Synthesis of Nanohole‐Structured Single‐Crystalline Platinum Nanosheets Using Surfactant‐Liquid‐Crystals and their Electrochemical Characterization

Nanohole‐structured single‐crystalline Pt nanosheets have been synthesized by the borohydride reduction of Na₂PtCl₆ confined to the lyotropic liquid crystals (LLCs) of polyoxyethylene (20) sorbitan monooleate (Tween 80) with or without nonaethylene‐glycol (C₁₂EO₉). The Pt nanosheets of around 4–10 nm in central thickness and up to 500 nm or above in diameter have a number of hexagonal‐shaped nanoholes ∼1.8 nm wide. High‐resolution electron microscope images of the nanosheets showed atomic fringes with a spacing of 0.22 nm indicating that the nanosheets are crystallographically continuous through the nanoholed and non‐holed areas. The inner‐angle distributions for the hexagonal nanoholes indicate that the six sides of the nanoholes are walled with each two Pt (111), Pt (1 1) and Pt (010) planes. The formation mechanism of nanoholed Pt nanosheets is discussed on the basis of structural and compositional data for the resulting solids and their precursory LLCs, with the aid of similar nanohole growth observed for a Tween 80 free but oleic acid‐incorporated system. It is also demonstrated that the nanoholed Pt nanostructures loaded on carbon exhibit fairly high electrocatalytic activity for oxygen reduction reaction and a high performance as a cathode material for polymer‐electrolyte fuel cells, along with their extremely high thermostability revealed through the effect of electron‐irradiation.