Optical CO2 sensor with the combination of colorimetric change of α-naphtholphthalein and internal reference fluorescent porphyrin dye

A new optical CO₂ sensor based on the overlay of the CO₂ induced absorbance change of pH indicator dye α-naphtholphthalein with the fluorescence of tetraphenylporphyrin (TPP) was developed. The observed luminescence intensity from TPP at 655 nm increased with increasing the CO₂ concentration. The ratio I₁₀₀/I₀ values of the sensing films consisting of α-naphtholphthalein in ethyl cellulose layer and TPP in polystyrene layer, where I₀ and I₁₀₀ represent the detected luminescence intensities from a layer exposed to 100% nitrogen and 100% CO₂, respectively, that the sensitivity of the sensor, are more than 53.9. The response and recovery times of the sensing films consisting of α-naphtholphthalein in ethyl cellulose layer and TPP in polystyrene layer were less than 5 s for switching from nitrogen to CO₂, and for switching from CO₂ to nitrogen. The signal changes were fully reversible and no hysterisis was observed during the measurements. The highly sensitive optical CO₂ sensor based on fluorescence intensity changes of TPP due to the absorption change of α-naphtholphthalein with CO₂ was achieved.     

Analysis of trichothecenes in barley tea and beer by liquid chromatography/tandem mass spectrometry

A simple method for analysis of trichothecenes [Type A: diacetoxyscirpenol, neosolaniol, HT-2 toxin, and T-2 toxin, Type B: deoxynivalenol, nivalenol, fusarenon-X, 3-acetyldeoxynivalenol, 15-acetyldeoxynivarenol] in barley tea and beer using liquid chromatography tandem mass spectrometry (LC/MS/MS) was developed. Trichothecenes were extracted with ethyl acetate-methanol (19:1). The solvent was evaporated to dryness and the residue was dissolved in water-methanol (3:1) for injection into the LC/MS/MS. The LC separation was performed with an octadecylated silica column at a flow-rate of 0.2 mL/min, using a mobile phase consisting of water, methanol and acetonitrile. MS/MS was used in multiple reaction monitoring, employing electrospray ionization (ESI-MRM). The recoveries of trichothecenes from drinks at 1 microg/L (Type A) and 10 microg/L (Type B) were 52.5-115.2% (barley tea) and 68.1-127.5% (beer). Five barley tea and ten beer samples were analyzed by this method. Trichothecenes were not detected in them. This method may have applications in quality assurance.     

Fabrication of X-rays mask with carbon membrane for diffraction gratings

We have produced diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. These diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Therefore, we decided to use the X-rays lithography technique that used synchrotron radiation of the directivity for a manufacture process. The accuracy of the completed structure depends largely on the accuracy of the X-ray mask. In our group, a resin material is conventionally used for the membrane of large X-ray masks. However, X-ray masks comprising a resin membrane have the disadvantage that, after several cycles of X-ray exposure, they crease and sag due to X-ray-derived heat. As a substitute for the conventional resin membrane, we experimentally fabricated a new X-ray mask using a carbon wafer membrane. The newly fabricated X-ray mask was subjected to X-ray exposure experiment. We succeeded in making the structure body which was almost shape. And the experimental results verified that the new mask did not deteriorate even when used repeatedly, demonstrating that it was highly durable.     

Microstructure and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials Fabricated by Interfacial Control

Carbon substrates were coated completely with a molten silicate glass, where the wettability of carbon to glass was improved by infiltration and pyrolysis of perhydropolysilazane. Microstructures of the carbon–glass interface were dependent on P n ₂ during coating. Coating at lower P n ₂ induced the formation of cristobalite at the carbon–glass interface. When the coating was performed at higher P n ₂, the glass and carbon were strongly adhered, without the formation of cristobalite. Coating at higher P n ₂ improved the thermal shock resistance of the glass layer, because crack initiation was not induced by the phase transformation of cristobalite during the cooling process. In the case of coating at higher P n ₂, an oxynitride glass layer was formed at the glass subsurface by dissolution of N₂. A porous glass subsurface layer with uniform spherical micro-pores could be produced by soaking near the glass transition temperature in a steam environment. The porous layer with fine and homogeneous microstructure acts as a thermal shock absorbing layer, so that glass-coated carbon with a porous glass layer has excellent thermal shock resistance in addition to steam oxidation resistance.     

Analysis and evaluations of logical instructions called in parallel digital optical operations based on optical array logic

The authors have analysed and evaluated a two-dimensional instruction set of parallel operation based on optical array logic (OAL), which is a digital optical computing paradigm, to clarify efficient composition of an optical computing system based on OAL. To evaluate parallel operation based on OAL, the author have introduced new indices and evaluated a logical instruction set of various parallel operations with the indices, so that a guideline for composing a simple and efficient OAL computing system is clarified. Also, the authors have proposed the reduced operation kernel set correlation technique to perform parallel operations more efficiently by a simple OAL computing system. It has been clarified that the technique can reduce the required hardware necessary for an OAL computing system for efficient general-purpose processing.     

Resistance to aerobic deterioration of total mixed ration silage: effect of ration formulation,air infiltration and storage period on fermentation characteristics and aerobic stability

BACKGROUND: High aerobic stability can be expected when wet brewers' grains are stored as a total mixed ration (TMR) silage. To understand the factors affecting the stability, the effects of ration formulation, air infiltration and storage period were studied. RESULTS: A TMR containing wet brewers' grains, hay, maize, wheat bran, beet pulp and molasses was ensiled in laboratory silos for 14 and 56 days. The effects of hay species (lucerne or sudangrass) and air infiltration (Exp. 1) and of excluding one, two or three items from the six ingredients (Exp. 2) were examined. Ethanol was the main fermentation product in all TMR silages in this study. Aerobic deterioration occurred in 14 day silages prepared with sudangrass hay along with air infiltration (Exp. 1), and with the simplest recipe where three items (hay, maize and wheat bran) were excluded (Exp. 2). No deterioration occurred in 56 day silages regardless of ration formulation and air infiltration. Yeasts receded in 56 day silages, except with the simplest recipe, to the 10² cfu g^?1 level and remained undetectable in the presence of air (Exp. 2). CONCLUSION: TMR silage can resist aerobic deterioration provided that a sufficient ensiling period has elapsed. Silages stored for only a few weeks may be susceptible to deterioration when air is infiltrated or where fewer ingredients are used in the TMR mixture. Copyright © 2007 Society of Chemical Industry     

Toward an information-integrated control system—the control-theoretic view of intelligent control technology

Recent computing technology is providing alternative strategies for the functionality and implementation of controllers for practical complex systems. An important issue will be how to integrate all information about control problems. In this paper, we present the control-theoretic view of intelligent control technology, and discuss a paradigm for an information-integrated control system. This work was presented, in part, at the Third International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–21, 1998     

Influence of the introduction of flexible alkyl chains on the thermal behavior and mechanical properties of mesogenic epoxy thermosets

A mesogenic epoxy resin (DGETAM) was cured with a series of curing agents having different lengths of long alkyl chain (nBAB, n = 4, 8, 12). Properties of the curings were compared with those of the DGEBA cured with the same curing agents revealing the achievement of a balance between certain levels of thermal properties and excellent mechanical properties. Moreover, some curing systems were prepared with twin mesogenic type epoxy resins (DGEnMA, n = 4, 6, 8, 10, 12) having different lengths of alkyl chain as a flexible spacer and the same curing agents (n′BABs). Combinations of the same concentrations of chemical structures in the basic units of the network structure were applied, and the thermal and mechanical properties of their curing systems were investigated. The fracture energy of each system increased considerably with the increase of the alkyl chain length that adjoins the two mesogenic groups in the epoxy resins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44244.     

Nonsalt 1‐(arylmethyloxy)pyrene photoinitiators capable of initiating cationic polymerization

Analysis of photoproducts derived from 1‐(methoxynaphthalen‐1‐ylmethyloxy)pyrene initiators and polymer end groups demonstrated that methoxynaphthalen‐1‐ylmethyl carbocation is involved in the initiation steps for both styrene (St) and cyclohexene oxide (CHO) polymerization. Charge transfer from the pyrenyloxy oxygen atom to the methoxynaphthalen‐1‐ylmethyl chromophore in the singlet excited state is assumed to be responsible for the efficient generation of the carbocation species, which also initiates the copolymerization of St and CHO. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40510.