Excess Solute Carbon and Retained Tetragonality in Tempered Fe-0.6C-1Mn Martensite and the Effect of Silicon Addition

The tetragonality and carbon distribution in tempered Fe-0.6C-1Mn martensite were investigated by X-ray diffraction and atom probe tomography to elucidate strain relaxation in the tetragonal lattice during tempering and its relationship with the solubility of excess carbon in martensite. Even though tetragonality (c/a) decreased with an increase in the tempering temperature, it persisted at low levels up to 400 °C. Si addition suppressed the decrease in tetragonality at 400 °C by inhibiting recovery in the dislocated matrix. Such persistence implies that dislocation migration is crucial for the complete release of tetragonal lattice strain at such a temperature, in addition to the decrease in the amount of solute carbon in martensite. A low level of tetragonality was observed for martensite containing carbon in the solid solution below the critical value of ~ 0.2 mass pct, at which a bcc structure was predicted. The amount of solute carbon after tempering was linearly correlated with tetragonality in the solute carbon content range of 0.07 to 0.6 mass pct, and the correlation coefficient was similar to those for as-quenched auto-tempered martensite and bainitic ferrite; these results indicate that the amount of excess carbon is simply determined by the amount of tetragonal lattice distortions remaining after carbide precipitation and recovery.

     

Effects of solid lubricants in backward extrusion

In the present paper, some solid lubricants were tested in backward extrusion friction tests with flat-headed punches using aluminium at room temperature. The results showed that anti-seizure ability was improved when wax was added to the solid lubricant samples. In addition, a water-based graphite lubricant and an ultrahigh molecular weight polyethylene (UHMW-PE) lubricant were tested using aluminium workpieces heated to 500°C. The lubricity of the UHMW-PE lubricant was found to be superior to that of the graphite lubricant.     

Burning Rate Augmentation of BAMO Based Propellants

Thermal decomposition and the burning properties of BAMO based propellants with HMX or AN/HMX have been investigated. The heat generated by the azide binder decomposition initiated and accelerated the thermal decomposition of HMX and AN. Ammonium perchlorate (AP) and lead stearate with carbon black significantly altered the mechanisms of the thermal decomposition and the burning properties of the HMX based propellants. AP showed an increase in burning rate with a slight decrease in burning rate pressure exponent. The lead catalyst yielded high value of the burning rate with the lowest pressure exponent. The ammonium dichromate also influenced the mechanisms of the thermal decomposition and the burning properties of the AN/HMX samples. The combination of ammonium dichromate and copper chromite was the most effective on the burning rate augmentation of AN/HMX based propellants. AN sublimed and evaporated from the condensed phase and mainly reacted exothermically in the gas phase HMX and AN/HMX based propellants showed smokeless burning characteristics in the small rocket motor combustion tests.     

Chemical reaction kinetics dataset of Cs-I-B-Mo-O-H system for evaluation of fission product chemistry under LWR severe accident conditions

In order to improve LWR source term under severe accident conditions, the first version of a fission product chemistry database named ‘ECUME’ was developed. The ECUME is intended to include several datasets of major chemical reactions and their effective kinetic constants for representative severe accident sequences. It is expected that the ECUME can serve as a fundamental basis from which fission product chemical models can be elaborated for use in the severe accident analysis codes. The implemented chemical reactions in the first version were those for representative gas species in Cs-I-B-Mo-O-H system from 300 to 3000 K. The chemical reaction kinetic constants were evaluated from either literature data or calculated values using ab-initio calculations. The sample chemical reaction calculation using the presently constructed dataset showed meaningful kinetics effects at 1000 K. Comparison of the chemical equilibrium compositions by using the dataset with those by chemical equilibrium calculations has shown rather good consistency for the representative Cs-I-B-Mo-O-H species. From these results, it was concluded that the present dataset should be useful to evaluate fission product chemistry in Cs-I-B-Mo-O-H system under LWR severe accident conditions, where kinetics effects should be considered.     

Effect of light intensity and frequency of flashing light from blue light emitting diodes on astaxanthin production by Haematococcus pluvialis

Flashing light from blue light emitting diodes is an effective method for the reduction of energy consumption in the bioproduction of astaxanthin by Haematococcus pluvialis. We investigated the effects of light intensity and frequency on the final astaxanthin concentration in bioproduction by H. pluvialis grown mixotrophically. The final astaxanthin concentration under illumination with flashing light, with frequencies ranging from 25 to 200 Hz, was dependent on the light intensity and on the duty cycle and was equivalent, or higher, in comparison with that under illumination with continuous light at the same incident intensity. The light intensity determined the maximum attainable concentration of astaxanthin under continuous illumination. Under illumination with flashing light, the ratio of the final astaxanthin concentration to the maximum concentration at a specific light intensity was correlated to the duty cycle in the frequency range from 25 to 200 Hz. The effect of lower frequencies on enhanced astaxanthin production under flashing light was also studied; at levels as low as 1 Hz, higher final astaxanthin concentrations were observed under flashing light compared to concentrations attained under continuous light.     

Study of pesticide residues in agricultural products for the "Positive List" system

During a 3-year monitoring survey (April 2002-March 2005) of pesticide residues in agricultural products, 592 samples (324 domestic; 268 imported) collected in Hyogo prefecture, Japan were analyzed. The number of pesticides tested increased from 232 in FY 2002 to 323 in FY 2004. The purpose of the study was to clarify the residue status by accumulating information about pesticides detected frequently, to allow effective and efficient regulation under the new "Positive List" legislation to be implemented in FY 2006. Overall, 47% of domestic and 61% of imported samples contained detectable residues and ca. 60% of positive samples contained multiple residues. The limit of quantitation was set at 0.01 microg/g and the limit of detection was 0.001-0.003 microg/ g. Most of the residues were present at low concentrations: 80% of the detections in samples excluding imported citrus fruits were < 0.05 microg/g. More than 5 different pesticides (> 0.01 microg/g) were detected simultaneously in 13 samples. The sum of the ratios of residues to MRLs was calculated as one of the indexes to represent the risk of multiple residues, and they exceeded 100% in 3 imported frozen vegetables; baby kidney bean, spinach, Welsh onion. Samples in violation of the Food Sanitation Law were not found in our survey, but 1.9% of the samples might be in conflict with the new "Positive List" legislation.     

Evaluation of drug toxicity with hepatocytes cultured in a micro-space cell culture system

A micro-space cell culture system was recently developed in which cells such as hepatocytes can be cultured and formed into a multicellular three-dimensional (3D) architecture. In this study, we assessed the performance of HepG2 cells cultured in this micro-space cell culture system in a drug toxicity test, and evaluated the effects of micro-space culture on their hepatocyte-specific functions. The micro-space cell culture facilitated the formation of 3D HepG2 cell architecture. HepG2 cells cultured in a micro-space culture plate exhibited increased albumin secretion and enhanced mRNA expression levels of cytochrome P450 (CYP) enzyme compared to those cultured in a monolayer culture. When the cells were exposed to acetaminophen, a hepatotoxic drug, the damage to the HepG2 cells grown in micro-space culture was greater than the damage to the HepG2 cells grown in monolayer culture. In addition, human primary hepatocytes grown in micro-space culture also exhibited increased albumin secretion, enhanced CYP mRNA expression levels and increased sensitivity to acetaminophen compared to those grown in monolayer culture. These results suggest that this micro-space culture method enhances the hepatocyte-specific functions of hepatocytes, including drug-metabolizing enzyme activities, making hepatocytes grown in the micro-space culture system a useful tool for evaluating drug toxicity in vitro.