New Approach for Macro Porous RB‐SiC Derived from SiC/Novolac‐type Phenolic Composite

A novel fabrication route to make macroporous silicon carbide (SiC) has been proposed in this study. The route is composed of the following two steps: the fabrication of porous α‐SiC/novolac‐type phenolic composite using hexamethylenetetramine (HMT) as a curing/blowing agent for the novolac monomer and a conventional reaction‐bonded (RB) sintering of the composite. The α‐SiC/novolac‐type phenolic composite was carbonized at 800°C for 2 h in N₂ gas and then reacted with the molten silicon at 1450°C for 30 min under vacuum, resulting in the macroporous RB‐SiC with an open porosity of 48% and relatively large pore size of ~110 μm. The compressive strength of the macroporous RB‐SiC was 113 MPa, which is relatively high compared to those reported for macroporous SiC of equivalent porosities and pore sizes.     

MicroRNA-331-3p Suppresses Cervical Cancer Cell Proliferation and E6/E7 Expression by Targeting NRP2

Aberrant expression of microRNAs (miRNAs) is involved in the development and progression of various types of cancers. In this study, we investigated the role of miR-331-3p in cell proliferation and the expression of keratinocyte differentiation markers of uterine cervical cancer cells. Moreover, we evaluated whether neuropilin 2 (NRP2) are putative target molecules that regulate the human papillomavirus (HPV) related oncoproteins E6 and E7. Cell proliferation in the human cervical cancer cell lines SKG-II, HCS-2, and HeLa was assessed using the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt (MTS) assay. Cellular apoptosis was measured using the TdT-mediated dUTP nick end labeling (TUNEL) and Annexin V assays. Quantitative RT-PCR was used to measure the messenger RNA (mRNA) expression of the NRP2, E6, E7, p63, and involucrin (IVL) genes. A functional assay for cell growth was performed using cell cycle analyses. Overexpression of miR-331-3p inhibited cell proliferation, and induced G2/M phase arrest and apoptosis in SKG-II, HCS-2 and HeLa cells. The luciferase reporter assay of the NRP2 3′-untranslated region revealed the direct regulation of NRP2 by miR-331-3p. Gene expression analyses using quantitative RT-PCR in SKG-II, HCS-2, and HeLa cells overexpressing miR-331-3p or suppressing NRP2 revealed down-regulation of E6, E7, and p63 mRNA and up-regulation of IVL mRNA. Moreover, miR-331-3p overexpression was suppressed NRP2 expression in protein level. We showed that miR-331-3p and NRP2 were key effectors of cell proliferation by regulating the cell cycle, apoptosis. NRP-2 also regulates the expression of E6/E7 and keratinocyte differentiation markers. Our findings suggest that miR-331-3p has an important role in regulating cervical cancer cell proliferation, and that miR-331-3p may contribute to keratinocyte differentiation through NRP2 suppression. miR-331-3p and NRP2 may contribute to anti-cancer effects.     

Frictional properties of diamond-like carbon, glassy carbon and nitrides with femtosecond-laser-induced nanostructure

This paper reports macro and micro frictional properties of DLC, TiN, CrN films and GC substrate of which surfaces are nanostructured with femtosecond (fs) laser pulses. The friction coefficient μ of the nanostructured surface was measured at a usual load with a ball-on-disk friction test machine. The results have shown that carbon materials of DLC and GC provide lower values of μ than TiN and CrN, and μ of DLC and TiN measured with a hardened steel ball decreases with an increase of the laser pulse energy. On the other hand, μ of nanostructured surfaces of thin films monotonously increases with an increase in laser pulse energy, which was measured with a micro-scratch test at an ultralight load of 1.5 mN utilizing a diamond tip. The friction coefficient of the GC substrate irradiated at a low fluence around the ablation threshold has shown a lower value than that of the non-irradiated surface.     

Detection of cytochrome P450 substrates by using a small-molecule droplet array on an NADH-immobilized solid surface

Seeing below the surface: A small-molecule droplet array platform on an NADH-immobilized solid surface and a biotinylated acetophenone derivative were developed to identify the substrate candidates for soluble P450 enzymes of interest. This methodology is thought to be easily applicable to other class I P450 systems, including those that use NADPH as cofactor.     

Improved selectivity in discriminating handedness and diameter of single-walled carbon nanotubes with N-substituted 3,6-carbazolylene-bridged chiral diporphyrin nanotweezers

Chiral diporphyrin nanotweezers 1 consisting of two chiral porphyrins with N-substituted 3,6-carbazolylene in between have been studied for the separation of single-walled carbon nanotubes (SWNTs). As compared to the analogous nanotweezers 2 without an N-substitutent, nanotweezers 1 with the N-octylcarbazolylene spacer exhibit much higher extraction ability and better selectivity for SWNTs. A narrower diameter range of SWNTs, from 0.88 to 0.92 nm, was selectively extracted with nanotweezers 1. In addition, only (7,6)-SWNTs of 0.90 nm diameter were optically enriched through extraction with 1, while SWNTs extracted with 2 showed lower optical purity of (7,6)-SWNTs. These enhanced extraction and discrimination abilities of 1 can be attributed to the formation of a more stable SWNT complex of 1 than of 2 in methanol.     

In situ binary sol–gel reaction of various trifunctional alkoxysilane in the silane‐grafted polyolefin matrix and its effect upon the mechanical properties

The vinyltrimethoxysilane‐grafted ethylene‐propylene copolymer/trifunctional methoxysilane (EPR‐g‐VTMS/RTMS) composites were prepared via in situ silica sol–gel reactions. Five trifunctional methoxysilane compounds (n‐hexyltrimethoxysilane, n‐decyltrimethoxysilane, n‐tetradecyltrimethoxysilane, n‐octadecyltrimethoxysilane, and phenyltrimethoxysilane) have been selected for this study. The water‐cross‐linked EPR‐g‐VTMS/RTMS composites were characterized by attenuated total reflectance‐Fourier transform infrared spectroscopy, gel content, solid‐state ²⁹Si CP/MAS NMR, wide‐angle x‐ray scattering, tensile strength, and field emission scanning electron microscopy measurements. The type of RTMS additive has a substantial influence on the nature of siloxane band networks and eventually the mechanical tensile properties. This finding suggests that the interaction and/or entanglement between the EPR‐g‐VTMS matrix and the substituent of the RTMS additives are crucial for the modifying mechanical properties. Moreover, for the water‐cross‐linked EPR‐g‐VTMS/CnTMS (n = 6, 10, 14, and 18) composites, the joint evidence provided by attenuated total reflectance‐Fourier transform infrared spectroscopy, ²⁹Si CP/MAS NMR, and wide‐angle x‐ray scattering results suggested the formation of ladder‐type poly(n‐alkyl silsesquioxane)s and the presence of the highly ordered structure with a thickness equal to the length of two n‐alkyl groups in all‐trans conformation. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers.     

Micro-flowers of poly(p-phenylene pyromelliteimide) crystals

Morphology control of poly(p-phenylene pyromelliteimide) (PPPI) crystals was examined using reaction-induced crystallization of oligomers during solution polymerization of self-polymerizable N-(4′-aminophenyl)-3-carboxyl-4-alkoxycarbonylphthalimide. Micro-flowers of the PPPI needle-like crystals were formed in which the needle-like crystals grew radially from the center part as petals. The molecules aligned regularly along the long axis of the needle-like crystal. The structure of alkoxy group in the monomer and the monomer concentration influenced the size of the needle-like crystals, and their average length and width were changeable from 640 nm to 1.69 μm and from 110 nm to 210 nm, respectively. The average thickness was 20 nm. The obtained micro-flowers possessed high crystallinity and exhibited excellent thermal stability.     

Phase structure in the blend of atactic poly(vinyl alcohol) with atactic poly(vinyl alcohol‐block‐vinyl acetate)

An almost fully saponified atactic poly(vinyl alcohol) and an atactic poly(vinyl alcohol‐block‐vinyl acetate) of which degree of saponification is 89 mol % were blended by a solution casting method. The phase structure of the blend film was analyzed by optical microscopy, ¹³C‐NMR, and differential scanning calorimetry. The most remarkable structure of the blend was composed of cylindrical domains penetrating the film. The swelling behavior of the blend films was also investigated in the dimethylsulfoxide and water mixed solvents to find differences in solubility and diffusion behavior between the matrix and the domain. The cylindrical domains could be selectively dissolved away in water and the film became porous. We tried to change the size of the cylindrical domain with various film preparation conditions. This aimed to turn the film into the useful filter membrane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1807–1815, 2002