A 1.3-GHz fifth-generation SPARC64 microprocessor

A fifth-generation SPARC64 processor is fabricated in 130-nm partially depleted silicon-on-insulator CMOS with eight layers of Cu metallization. At V/sub dd/ = 1.2 V and T/sub a/ = 25/spl deg/C, it runs at 1.3 GHz and dissipates 34.7 W. The chip contains 191 M transistors with 19 M logic circuits in an area of 18.14 mm /spl times/ 15.99 mm and is covered with 5858 bumps, of which 269 are for I/O signals. It is mounted in a 1360-pin land-grid-array package. The 16-byte-wide system bus operates with a 260-MHz clock in single-data-rate or double-data-rate modes. This processor implements an error-detection mechanism for execution units and data path logic circuits in addition to on-chip arrays to detect data corruption. Intermittent errors detected in execution units and data paths are recovered via instruction retry. A soft barrier clocking scheme allows amortization of the clock skew and jitter over multiple cycles and helps to achieve high clock frequency. Tunability of the clock timing makes timing closure easier. A relatively small amount of custom circuit design and the use of mostly static circuits contributes to achieve short development time.     

A 950-MHz rectifier circuit for sensor network tags with 10-m distance

This paper presents a 950-MHz wireless power transmission system and a high-sensitivity rectifier circuit for ubiquitous sensor network tags. The wireless power transmission offers a battery-life-free sensor tag by recharging the output power of a base station into a secondary battery implemented with the tag. For realizing the system, a high-sensitivity rectifier with dynamic gate-drain biasing has been developed in a 0.3-/spl mu/m CMOS process. The measurement results show that the proposed rectifier can recharge a 1.2-V secondary battery over -14-dBm input RF power at a power conversion efficiency of 1.2%. In the proposed wireless system, this sensitivity corresponds to 10-m distance communication at 4-W output power from a base station.     

Electronically controlled high-speed wavelength-tunable femtosecondsoliton pulse generation using acoustooptic modulator

The compact system of electronically controlled high-speed wavelength-tunable femtosecond (fs) soliton pulse generation is realized for the first time using a passively mode-locked fs fiber laser, a polarization maintaining optical fiber, and an acoustooptic (A-O) modulator. The wavelength of the output pulses can be continuously tuned simply by controlling the input voltage into the A-O modulator. The wavelength of the soliton pulses can be changed at 2.5-μs intervals. Wavelength stabilization, time division wavelength multiplexed soliton pulse generation, and a wavelength scanner have been demonstrated     

Subcellular localization of fructosyl amino acid oxidases in peroxisomes of Aspergillus terreus and Penicillium janthinellum

Fructosyl amino acid oxidase (FAOD) is the enzyme catalyzing the oxidative deglycation of Amadori compounds, such as fructosyl amino acids, yielding the corresponding amino acids, glucosone, and H(2)O(2). In a previous report, we determined the primary structures of cDNAs coding for FAODs from two fungal strains Aspergillus terreus AP1 and Penicillium janthinellum and we found that both fungal FAODs included the putative peroxisome targeting signal 1 (PTS1) at the carboxyl terminal (Yoshida, N. et al., Eur. J. Biochem., 242, 499-505, 1996). In this study, we determined the intracellular localization of FAODs in these two fungi. Subcellular fractionation experiments and immuno-electronmicroscopic observations, together with the previous findings indicated that the FAODs were localized in peroxisomes of A. terreus AP1 and P. janthinellum. These FAODs were also found to belong to a new member of "peroxisomal sarcosine oxidase family protein" in eucaryotic cells.     

1 Tbit/s (111 Gbit/s/ch X 10 ch) no-guard-interval CO-OFDM transmission over 2100 km DSF

Spectrally efficient (2bit/s/Hz) 1 Tbit/s DWDM transmission of 111 Gbit/s no-guard-interval PDM CO-OFDM signals with 50 GHz spacing over DSF is demonstrated. The record transmission distance of 2100 km was achieved for a 100 Gbit/s-data-rate CO-OFDM system.     

Spectral restoration and energy resolution improvement of electron energy-loss spectra by Pixon reconstruction: II. Application to practical ELNES analysis of low SNR

We applied Pixon deconvolution as introduced in Part I to several practical, examples of low signal-to-noise ratio (SNR), electron energy-loss spectra with a goal toward restoring their fine spectral features and/or improving the energy resolution. We demonstrate that by directly fitting the two-dimensional spectral data recorded on the CCD; the method enables us to reveal fine spectral structures. Consequently, Pixon reconstruction extends the ability to probe electronic states in very spatially localized areas, a capability currently unique to our method.     

In situ high-resolution transmission electron microscopy of photocatalytic reactions by excited electrons in ionic liquid

A transmission electron microscope (TEM) sample for observing photocatalysis in a liquid was prepared by using N,N,N-trimetyl-N-propylammonium-bis(trifluoromethanesulfonyl)imide. The ionic liquid (IL) was used as a reaction solvent. Tetrachloroauric acid was dissolved in the IL as gold ion species. Rutile particles were added in the solution as a photocatalyst. The low vapor pressure of the IL enables a diffusing system in high vacuum of TEM. Rutile particles were UV irradiated in that liquid phase. After 3 h UV irradiation, a gold particle of 8 nm diameter was grown on the TiO2 surface. Photonucleation of Au/TiO2 system was discussed from the high-resolution TEM images.     

Hierarchical Self‐Assembly of Peptide‐Coated Carbon Nanotubes

Numerous applications, from molecular electronics to super‐strong composites, have been suggested for carbon nanotubes. Despite this promise, difficulty in assembling raw carbon nanotubes into functional structures is a deterrent for applications. In contrast, biological materials have evolved to self‐assemble, and the lessons of their self‐assembly can be applied to synthetic materials such as carbon nanotubes. Here we show that single‐walled carbon nanotubes, coated with a designed amphiphilic peptide, can be assembled into ordered hierarchical structures. This novel methodology offers a new route for controlling the physical properties of nanotube systems at all length scales from the nano‐ to the macroscale. Moreover, this technique is not limited to assembling carbon nanotubes, and could be modified to serve as a general procedure for controllably assembling other nanostructures into functional materials.     

12300 ps/nm, 2.4 Gb/s nonregenerative optical fiber transmissionexperiment and effect of transmitter phase noise

A nonregenerative optical transmission experiment with a chromatic dispersion of more than 10000 ps/nm is reported. Externally intensity-modulated 2.4 Gb/s optical signals were transmitted over 710 km of nondispersion-shifted optical fiber using ten Er-doped fiber amplifiers with a total net optical gain of 125 dB. Although the total chromatic dispersion amounted to 12300 ps/nm, the power penalty observed was as small as 0.5 dB, and an error floor was not observed. The effect of transmitter phase noise associated with fiber chromatic dispersion was experimentally investigated     

Extremely narrow spectral linewidth and low chirping of theMQW-DFB-PPIBH laser diode

The low threshold current of 9 mA, the high side-mode suppression ratio of more than 45 dB, the extremely narrow spectral linewidth of 1.1 MHz, and the low chirping of 2.8 Å at -20 dB at 2 Gb/s nonreturn to zero (NRZ) modulation have been achieved in the multiple quantum well (MQW) distributed feedback (DFB) p-substrate partially inverted buried heterostructure (PPIBH) laser diode. The spectral linewidth of 1.1 MHz is the narrowest value among 300-μm-length solitary laser diodes. These results suggest that the MQW-DFB laser diodes are a promising light source for longer distance and higher bit-rate optical communication systems and coherent optical communication systems