Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealing

Carbon contamination from the carbon paper/dies during spark-plasma-sintering (SPS) processing was examined in the MgAl₂O₄ spinel. The carbon contamination sensitively changes with the heating rate during the SPS processing. At the high heating rate of 100 °C/min, the carbon contamination having organized structures occurred over almost the entire area from the surface to deep inside the SPSed spinel disk. In contrast, at the slow heating rate of 10 °C/min, the carbon contamination having disordered structures occurred only around the surface area. The carbon phases transform into high pressure CO/CO₂ gases by post-annealing in air and lead to pore formation along the grain junctions. The pore formation significantly occurs at the high heating rate due to the large amount of the contaminant carbon phases. This suggests that if once the carbon contamination was formed in the materials, it is very difficult to remove the carbon phases from the materials.     

Synthesis and Initial Characterization of a Selective,Pseudo-irreversible Inhibitor of Human Butyrylcholinesterase as PET Tracer

The enzyme butyrylcholinesterase (BChE) represents a promising target for imaging probes to potentially enable early diagnosis of neurodegenerative diseases like Alzheimer's disease (AD) and to monitor disease progression in some forms of cancer. In this study, we present the design, facile synthesis, in vitro and preliminary ex vivo and in vivo evaluation of a morpholine-based, selective inhibitor of human BChE as a positron emission tomography (PET) tracer with a pseudo-irreversible binding mode. We demonstrate a novel protecting group strategy for ¹⁸F radiolabeling of carbamate precursors and show that the inhibitory potency as well as kinetic properties of our unlabeled reference compound were retained in comparison to the parent compound. In particular, the prolonged duration of enzyme inhibition of such a morpholinocarbamate motivated us to design a PET tracer, possibly enabling a precise mapping of BChE distribution.     

Autophagic Cell Death and Cancer

Programmed cell death (PCD) is a crucial process required for the normal development and physiology of metazoans. The three major mechanisms that induce PCD are called type I (apoptosis), type II (autophagic cell death), and type III (necrotic cell death). Dysfunctional PCD leads to diseases such as cancer and neurodegeneration. Although apoptosis is the most common form of PCD, recent studies have provided evidence that there are other forms of cell death. One of such cell death is autophagic cell death, which occurs via the activation of autophagy. The present review summarizes recent knowledge about autophagic cell death and discusses the relationship with tumorigenesis.     

Mucin 1 Gene (MUC1) and Gastric-Cancer Susceptibility

Gastric cancer (GC) is one of the major malignant diseases worldwide, especially in Asia. It is classified into intestinal and diffuse types. While the intestinal-type GC (IGC) is almost certainly caused by Helicobacter pylori (HP) infection, its role in the diffuse-type GC (DGC) appears limited. Recently, genome-wide association studies (GWAS) on Japanese and Chinese populations identified chromosome 1q22 as a GC susceptibility locus which harbors mucin 1 gene (MUC1) encoding a cell membrane-bound mucin protein. MUC1 has been known as an oncogene with an anti-apoptotic function in cancer cells; however, in normal gastric mucosa, it is anticipated that the mucin 1 protein has a role in protecting gastric epithelial cells from a variety of external insults which cause inflammation and carcinogenesis. HP infection is the most definite insult leading to GC, and a protective function of mucin 1 protein has been suggested by studies on Muc1 knocked-out mice.     

Optical resolution of racemic amino acid derivatives with chiral polyamides bearing glutamyl residue as a diacid component

Novel chiral polyamides with chiral environment in their main chains were obtained from aromatic diamine, 4,4′‐diaminodiphenylmethane (DADPM), and the D ‐isomer or the L ‐isomer of N‐α‐protected glutamic acid, such as N‐α‐benzyloxycarbonyl‐D ‐glutamic acid (Z‐D ‐Glu‐OH) or N‐α‐benzyloxycarbonyl‐L ‐glutamic acid (Z‐L ‐Glu‐OH), in the presence of triphenyl phosphite (TPP). Two types of newly prepared polyamide showed optical rotation, implying that there were asymmetric carbons in their main chains. Circular dichroism studies demonstrated that resulting chiral poly‐ amides took a helical structure. Optical resolution ability of those two types of polyamide was studied by adopting potential difference as a driving force for membrane transport. Membranes showed permselectivity toward racemic mixture of N‐α‐acetyltryptophan (Ac‐Trp). The permselectivity was dependent on the absolute configuration of diacid component. The permselectivity was expressed by diffusivity selectivity, which was determined by the presence of chiral helicity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Solidification of Al2O3–YAG eutectic composites with off-metastable eutectic composition from undercooled melt produced by melting Al2O3–YAP eutectics

It has been reported that solidification of the Al₂O₃–YAG equilibrium eutectic structure follows melting of the Al₂O₃–YAP metastable eutectic structure. Since the exothermic heat due to solidification was consumed by the endothermic heat due to melting, a fine and uniform eutectic structure was obtained. However, the composition of the Al₂O₃–YAG eutectic structure is restricted to the metastable eutectic composition. In this paper, Al₂O₃–YAG eutectic compacts with an off-metastable eutectic composition were prepared by the addition of Al₂O₃ particles to Al₂O₃–YAP eutectic particles with diameters less than 20 μm. In compositions ranging from 18.5 mol%Y₂O₃ to 13.5 mol%Y₂O₃, dense Al₂O₃–YAG eutectic compacts were formed without any Al₂O₃ segregation. The flexural strength and the fracture toughness remained almost unchanged with the increase in the Al₂O₃ phase. The addition of Al₂O₃ particles to the Al₂O₃–YAP eutectic particles enabled the matrix phase to change from the YAG phase to the Al₂O₃ phase.     

Doping effect on sinterability of polycrystalline yttria: From the viewpoint of cation diffusivity

The sintering behavior of Y₂O₃ doped with 1 mol% of a trivalent or tetravalent cation was investigated by pressureless sintering in air. Ga³⁺ or Ge⁴⁺-doped Y₂O₃ bodies exhibited higher relative densities than the undoped Y₂O₃, while the La³⁺ or Zr⁴⁺-doping suppressed the densification of Y₂O₃. An interdiffusion experiment was performed on the diffusion couples of polycrystalline Er₂O₃ and Y₂O₃ doped with Ni²⁺ or Zr⁴⁺, which are some of the most effective and least effective dopants for the improvement of the sinterability, respectively. The lattice and grain boundary diffusion coefficients of the Er³⁺ cation in Y₂O₃ were increased by the Ni²⁺-doping, but were decreased by the Zr⁴⁺-doping. High-resolution transmission electron microscopy observations and nano-probe X-ray energy dispersive spectroscopy analyses confirmed that the dopant cations segregate along the grain boundaries without forming an amorphous phase. The doping effect on the sinterability of Y₂O₃ must result from the change in the diffusivity in Y₂O₃.     

Non‐Enzymatic Geometry‐Selective Acylation of Tri‐ and Tetrasubstituted α,α′‐Alkenediols

A highly geometry‐selective organocatalytic acylation of tri‐ and tetra‐substituted 2‐alkylidene‐1,3‐propanediols has been developed. The highly E‐selective acylation of various tetrasubstituted 2‐alkylidene‐1,3‐propanediols was achieved in 96 to >99% selectivity for the first time by a non‐enzymatic protocol.     

Synthesis,properties, and biodegradability of three-branched copolyamide (4/6)

Previous studies on polyamide 4, excellent properties, functionalities, and biodegradation in natural condition have been shown. In this study, three-branched (star-shaped) copolyamides constituted of polyamide 4 and polyamide 6 constitutional unit were synthesized by anionic ring-opening copolymerization of 2-pyrrolidone with ε-caprolactam. The thermal and mechanical properties and the biodegradability of the obtained copolyamides have been systematically investigated. The weight-average molecular weight of the copolyamides was as high as tens of thousands (M_w 10–80 × 10³ g/mol). The composition of the copolyamides was approximately in accord with the monomer feed ratio, thereby being controllable. The thermal and mechanical properties changed readily as the composition was varied (T_m 146–266°C, ΔH_m 10–70 J/g, T_d 278–369°C, tensile strength 28–64 MPa, elongation at break 80–750%). The copolyamide having 2-pyrrolidone unit of 96–51 mol% exhibited biodegradability by an activated sludge. The biodegradation of the copolyamide proceeded uniformly without disproportion in constitutional unit.