Polyurethane composites based on oil palm empty fruit bunches: Effect of isocyanate/hydroxyl ratio and chemical modification of empty fruit bunches with toluene diisocyanate and hexamethylene diisocyanate on mechanical properties

This study focuses on the effect of isocyanate (NCO)/hydroxyl (OH) group ratios and chemical modification of oil palm empty fruit bunches (EFBs) with toluene diisocyanate (TDI) and hexamethylene diisocyanate (HMDI) on the mechanical properties of EFB–polyurethane (PU) composites. The tensile, flexural, and impact properties are affected by the NCO/OH ratios. The tensile strengths, flexural strengths, and toughness increase as the NCO/OH increases; however, the modulus decreases. The reduction in the modulus is attributable to the increased flexibility of the PU linkages. Chemical modification of the EFBs increases the tensile strength, flexural strength, and toughness; however, the modulus is lowered as the percentage of treated EFB is increased. Impact strength results show that the strength increases as the NCO/OH ratio is increased. At NCO/OH ratios of 1.0 and 1.1, the composites with HMDI‐treated fibers exhibit higher impact strength than those with TDI‐treated and untreated fibers, respectively. This may be due to the longer and more flexible chain length of HMDI as compared to TDI, which enables the composites to absorb more energy before failure. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Multimedia framework to support eHealth applications

Limited bandwidth resources lead to a number of challenges especially for eHealth applications, which are communicated over IP and wireless networks. These multimedia services include high-resolution videos and have very large file sizes that require a high level of compression to overcome this limitation. Therefore, there is an acute demand for the research community to provide an efficient multimedia framework to encode medical videos with high quality specifically under the conditions of an error-prone environment. Both an affordable delivery framework and effective coding techniques are extremely desirable for the delivery of high-quality eHealth video applications for transmission over heterogeneous networks and devices. In this paper, we propose and demonstrate a multimedia framework to support eHealth applications, which has an improved coding scheme that uses an SVC-scalable extension of MPEC-4 AVC/H.264. Simulation results show that the proposed scheme achieves a significant improvement in terms of the PSNR-Y gain and reduces the picture quality degradation caused by artifacts and distortions, compared to the existing scheme.     

The impact of interaction quality factors on the effectiveness of Web-based information system: the mediating role of user satisfaction

Recently, IS researchers have focused on the assessment of Web-based information system (WBIS) at the individual level as it highly contributes to the organizations’ employees. The evaluation and development of WBIS is significantly needed because the top management is in need of justifying their costly IT investment in terms of its impacts on employee performance. For this purpose, this study is primarily concerned with the development and validation of new multidimensional instrument, and also a theoretical framework for assessing the impacts of user interface quality, online communication quality, and user satisfaction on the effectiveness of Web employee portals. The effectiveness is assessed in terms of contextual performance. In a large-scale study, a sample of 384 United Nations Relief and Works Agency for Palestine Refugees respondents are gathered in order to validate and check the reliability of the adapted study instrument. The results of validity and reliability analysis provide enough confidence to proceed toward validating the proposed theoretical framework. The results of multiple-regression analysis indicate that there is a positive significant relationship between user interface quality, communication quality, user satisfaction, and effectiveness at significance level (sig. < 0.01). As another important point, the results of hierarchical regression showed that user satisfaction has a mediating role on the relationship between user interface quality, communication quality, and contextual employee performance. The findings and implications of this research are discussed. Finally, it is expected that this study would contribute to empirical studies in the fields of IS and user behavior assessment.     

Insecticidal Effects of Organotin(IV) Compounds on Plutella Xylostella (L.) Larvae. II. Inhibitory Potencies Against Acetylcholinesterase and Evidence for Synergism in Tests With Bacillus Thuringiensis(BER.) and Malathion

Features of pesticide synergism and acetylcholinesterase (AChE) inhibition (in vitro) were studied using a selected range of organotin compounds against the early 4th instar larvae of a highly resistant strain of the diamondback moth (DBM), Plutella xylostella, a major universal pest of cruciferous vegetables.Fourteen triorganotin compounds were evaluated for their ability to enhance the toxicity of the microbial insecticide, Bacillus thuringiensis (BT) and of the commercial insecticide, Malathion to Plutella xylostella larvae. Supplemental synergism was observed with triphenyl- and tricyclopentyltin hydroxides in combinations with Bacillus thuringiensis. Increased synergism was observed with an increase in the number of cyclopentyl groups on tin in the mixed series, Cyp(n) Ph(3-n) SnX, where X = OH, and 1-(1,2,4-triazolyl). The combination of (p-chlorophenyl)diphenyltin N,N-dimethyldithiocarbamate at LD(10) and LD(25) concentrations with sublethal concentrations of Malathion as well as of tricyclohexyltin methanesulphonate at the 0.01% (w/v) concentration with Malathion exerted strong synergistic effects (supplemental synergism) with toxicity index (T.I) values of 7.2, 19.8 and 10.1, respectively.Studies on the in vitro inhibition of acetylcholinesterase prepared from the DBM larvae showed that while most of the triorganotin Compounds tested were without effect on the enzyme, compounds containing the thiocarbamylacetate or the dithiocarbamylacetate moieties demonstrated appreciable levels of inhibition, being comparable in efficacy to commercial grades of Malathion and Methomyl.     

Effect of Composition on the Electromechanical Properties of (1-x)Pb(Mg1/3Nb2/3)O3−XPbTiO3 Ceramics

Ceramic lead magnesium niobate–lead titanate ((1-x)PMN_-xPT) of different compositions has been prepared by the columbite precursor method. This study discusses compositions ranging from 0.94PMN–0.06PT to 0.60PM–N0.40PT, focusing on two areas of the (1-x)PMN_xPT system: compositions that exhibit electrostrictive behavior, and those that show piezoelectric behavior. In electrostrictive compositions where x is in the range of 0.06–0.20, the dielectric constant and electromechanical coupling factor dependencies on the bias field are evaluated. The optimal electromechanical properties are obtained with the composition 0.82PMN–0.18PT, measured at temperature T = T_m (the temperature of maximum dielectric constant) = 80°C and with a dc bias of 5 kV/cm. X–ray diffractometry is used to show that the (1-x)PMN_-xPT system has a compositionally wide two–phase region and that 0.655PMN–0.345PT is the morphotropic phase boundary (MPB) composition. Electromechanical property evaluation shows that the optimal piezoelectric properties (piezoelectric charge coefficient ( d₃₃ ) value of 720 pC/N, dielectric constant ( K ) value of 5400, and electromechanical planar and thickness coupling coefficient ( k_p and k_t , respectively) values of 62% and 46%, respectively) are obtained at the MPB composition.     

Abutilon indicum Seed Oil — Characterisation of HBr-Reactive Acids

The seed oil of Abutilon indicum (Malvaceae) contains three HBr-reactive fatty acids. These are shown to be cis-12,13-epoxyoleic (vernolic) acid, 1.6% 9,10-methylene-octadec-9-enoic (sterculic) acid, 0.9%; as well as 8,9-methylene-heptadec-8-enoic (malvalic) acid, 2.3%. Quantitative results are obtained by combining informations about the HBr-titration, the preparative thin layer separation of oxygenated and non-oxygenated acids, and gas liquid chromatographic analysis.     

Dishwashing performance of mixed palm stearin sulfonated methyl esters and polyoxyethylene sorbitan esters

The detergency profiles of sodium salt α-sulfonated methyl esters derived from palm stearin (α-SMEPS) and polyoxyethylene (20) sorbitan monoesters (POESE) in mixed micelle systems were evaluated as a function of the weight ratios of α-SMEPS/POESE [polyoxyethylene (20) sorbitan monolaurate (12), polyoxyethylene (20) sorbitan monostearate (18∶0), and polyoxyethylene (20) sorbitan monooleate (18∶1)] at different water hardness values (5.12, 51.2, and 512.0 ppm CaCO₃) and temperatures (20, 30, 45, and 65°C), respectively. All the mixtures of α-SMEPS/POESE (12, 18∶0, and 18∶1) systems exhibited a synergistic effect at 65°C in the absence of hardness. This was evaluated by measuring the percentage of soil removed. The systems showed an increase in detergency with both the temperature and water hardness. Maximal detergency was observed with 5.12 ppm CaCO₃ in the mixed surfactant solution.     

Synthesis and Characterization of Nano-Composite Alumina–Titania Ceramic Membrane for Gas Separation

A ceramic composite membrane was prepared using a commercial titania ceramic membrane coated by alumina oxide via a sol–gel technique where polyvinyl alcohol (PVA) was used as a binder. The characteristic of the membrane was analyzed in terms of the effect of PVA concentration and sintering temperature on viscosity, pore size, density, porosity and surface area of the membrane. Two vol% of PVA solution containing 4 g of PVA in 100 mL of water was adequate to achieve an appropriate porosity level to avoid cracks on the gel layer. Sol viscosity and pore size of the membrane essentially increased when the PVA concentration was increased. The density of the membrane increased as the sintering temperature increased. The porosity level however, decreased when the temperature was increased. The composite membrane was further characterized in terms of permeability of pure gas at low-temperature region (301 K) where an experimental platform has been developed to perform the permeability studies.     

Investigations on the adhesion and interfacial properties of polyurethane foam/thermoplastic materials

The adhesion and interfacial properties of polyurethane (PU) foams with thermoplastic (TP) materials were investigated using different techniques. The adhesion performance of PU foam with TP materials was evaluated using the peel test method, and the adhesion durability was checked after different climate treatments. X‐ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements were used to study the surface and interface morphology of PU foam and TP material system. Three types of PU foam samples which differ in their composition and also five commercially available TP blends systems, based on poly(carbonate), poly(styrene‐co‐maleic anhydride), poly(acrylonitrile‐butadiene‐styrene), and silicone acrylate rubber have been used. The slow reacting foam shows the best adhesion properties with all the TP materials. The climate treatments strongly effected the PU foam adhesion durability with poly(carbonate) containing TP materials (70–80% loss in adhesion), but nearly no effect with poly(styrene‐co‐maleic anhydride). The samples with lowered adhesion could be separated by peeling without visible foam residues on the TP surface. AFM, XPS, and surface tension studies have shown that the surface properties of the TP material are still governed by the PU foam. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 479–488, 2007     

Augmented grasshopper optimization algorithm by differential evolution: a power scheduling application in smart homes

With the increasing number of electricity consumers, production, distribution, and consumption problems of produced energy have appeared. This paper proposed an optimization method to reduce the peak demand using smart grid capabilities. In the proposed method, a hybrid Grasshopper Optimization Algorithm (GOA) with the self-adaptive Differential Evolution (DE) is used, called HGOA. The proposed method takes advantage of the global and local search strategies from Differential Evolution and Grasshopper Optimization Algorithm. Experimental results are applied in two scenarios; the first scenario has universal inputs and several appliances. The second scenario has an expanded number of appliances. The results showed that the proposed method (HGOA) got better power scheduling arrangements and better performance than other comparative algorithms using the classical benchmark functions. Moreover, according to the computational time, it runs in constant execution time as the population is increased. The proposed method got 0.26?% enhancement compared to the other methods. Finally, we found that the proposed HGOA always got better results than the original method in the worst cases and the best cases.