Mechanism of void formation in cable covering

Solidification after extrusion of coaxial cables has been experimentally simulated. Solidification tests were performed with two HDPE grades and under several pressures; the extrusion velocity was varied in a suitable range so as to detect the critical velocity for void formation. A qualitative analysis of the void formation mechanism is carried out, and the predicted trends favorably compare with the critical velocity data.     

Phase Studies Concerning Sintering in Aluminas Doped with Ti4+

Previous solid state analyses of sintering in Ti⁴⁺-doped-commercial alumina are shown to be in error because a liquid phase exists in the appropriate region of the Al₂O₃−TiO₃−Na₂Ophase diagram at least by 1350^°C, a temperature lower than that at which "solid state" studies were conducted. It is suggested that liquid-phase sintering is a much more common occurrence than was realized formerly.     

The function of bleaching earths in the processing of palm,palm kernel and coconut oils

The results presented in the literature, which attempt to elucidate the mechanisms by which triglyceride oils are bleached by earths, are reviewed. The impact of this work and how the mechanistic proposals affect changes in oil properties are considered, with particular emphasis on the needs of the palm oil processor. Important properties include color, metals and phosphorus content and oxidative stability of the oil. Investigations made in our own laboratories have been aimed at elucidating the effect of varying physical and chemical properties of the bleaching earth on the quality of bleached and deodorized oils. Techniques used in this work are pore-size distribution, surface area, scanning and transmission electron microscopy and a variety of chemical and X-ray analysis methods. The ability to vary such parameters in montmorillonite clays by alteration of process conditions to give materials with specific performance characteristics is demonstrated. Comparisons are made between acid-activated montmorillonites and other clay types.     

Perturbation techniques for detecting domain errors

Perturbation testing is an approach to software testing which focuses on faults within arithmetic expressions appearing throughout a program. This approach is expanded to permit analysis of individual test points rather than entire paths, and to concentrate on domain errors. Faults are modeled as perturbing functions drawn from a vector space of potential faults and added to the correct form of an arithmetic expression. Sensitivity measures are derived which limit the possible size of those faults that would go undetected after the execution of a given test set. These measures open up an interesting view of testing, in which attempts are made to reduce the volume of possible faults which, were they present in the program being tested, would have escaped detection on all tests performed so far. The combination of these measures with standard optimization techniques yields a novel test-data-generation method called arithmetic fault detection     

Hydrodynamic loadings due to the motion of large offshore structures

A very effective non-reflecting boundary condition is proposed for the three-dimensional finite element analysis of hydrodynamic loads on offshore structures under motion due to earthquake, waves or machinery forces. The effect of surface waves is considered and the analysis is conducted in the frequency domain. The structure is assumed to be sufficiently large such that the non-linear effect of drag force is negligible. The unbounded extent of water surrounding the structure is assumed to be incompressible. The boundary condition, which is derived for the general analysis of structure-water interaction, is found to depend on the frequency of excitation, the location of the truncation boundary and the depth of water in the far field. Through some simplified numerical examples, it is shown that the proposed technique is very efficient for a wide range of the frequency of excitation. Incorporation of the boundary condition into a finite element program requires practically no extra effort.     

Conversion of acrylonitrile-based precursors to carbon fibres

The progress of stabilization of two compositions of acrylic fibres with various orientations has been followed by a variety of techniques. The thermooxidative treatments for stabilization have been carried out in a continuous process and also in a batch process under free shrinkage, constant length and constant tension conditions. The morphological model of acrylic fibres consists of an alternating sequence of laterally ordered and laterally disordered regions along the fibre direction. This structure is consistent with the observations based on small-angle X-ray scattering of copper- impregnated precursor fibres and thermomechanical response, thermal stress development, calorimetry, wide- and small-angle X-ray scattering and sonic modu-lus measured at different extents of stabilization. Lateral as well as orientational order in these fibres can be increased markedly through a high-temperature deformation process prior to stabilization. An increase in perfection and extent of order is observed in the early stages of stabilization. There is also a simultaneous decrease in the orientation of the disordered phase at this stage and the extent of this decrease depends on the axial constraints imposed on the fibre. Little difference in the rate of stabilization is observed as measured by density or oxygen uptake for fibres with different extents of orientation, lateral order or restraint. Fibres containing itaconic add, a stabilization catalyst did show an increased rate of stabilization. Inferences have been drawn regarding additional research pertaining to achieving high order in precursor fibres, minimizing orientational relaxation during oxidative stabilization, and the techniques for monitoring the extents of the stabilization treatment and the changes in relevant morphological parameters.     

Monitoring of human enteric viruses and coliform bacteria in waters after urban flood in Jakarta, Indonesia.

Floodwaters in Kampung Melayu village, Jakarta, Indonesia, as well as river water and consumable water (including groundwater and tap water) samples in flooded and non-flooded areas, were quantitatively analysed to assess occurrence of viruses and total coliforms and E. coli as bacterial indicators after flooding event. High numbers of enterovirus, hepatitis A virus, norovirus (G1, G2) and adenovirus were detected at high concentration in floodwaters and waters sampled from Ciliwung River which runs across metropolitan Jakarta and is used widely for agriculture and domestic purposes by poor residents. One out of three groundwater wells in the flooded area was contaminated with all viruses tested while no viruses were found in groundwater samples in non-flooded areas and tap water samples. The results revealed that human enteric viruses, especially hepatitis A virus and adenovirus, were prevalent in Jakarta, Indonesia. This study suggested that flooding posed a higher risk of viral infection to the people through contamination of drinking water sources or direct contact with floodwaters.     

Boosting nitrification by membrane-attached biofilm.

Nitrification is a key step for reliable biological nitrogen removal. In order to enhance nitrification in the activated sludge (AS) process, membrane-attached biofilm (MAB) was incorporated in a conventional activated sludge tank. Simultaneous organic carbon removal and nitrification of the MAB incorporated activated sludge (AS + MAB) process was investigated with continuous wastewater treatment. The effluent TOC concentration of AS and the AS + MAB processes were about 6.3 mg/L and 7.9 mg/L, respectively. The TOC removal efficiency of both AS and AS + MAB were above 95% during the wastewater treatment, indicating excellent organic carbon removal performance in both processes. Little nitrification occurred in the AS process. On the contrary, successful nitrification was obtained with the AS + MAB process with nitrification efficiency of about 90%. The volumetric and surface nitrification rates were about 0.14 g/Ld and 6.5 g/m2d, respectively. The results clearly demonstrated that nitrification in the conventional AS process was boosted by MAB. Furthermore, the microfaunal population in the AS + MAB process was different from that in the AS process. The high concentration of rotifers in the AS + MAB process was expected to decrease the generation of excess sludge in the process.     

Optimal algorithms for adjacent side routing

We consider the switchbox routing problem of two-terminal nets in the case when all thek nets lie on two adjacent sides of the rectangle. Our routing model is the standard two-layer model. We develop an optimal algorithm that routes all the nets whenever a routing exists. The routing obtained uses the fewest possible number of vias. A more general version of this problem (adjacent staircase) is also optimally solved.This research was supported in part by NSA Contract No. MDA-904-85H-0015, NSF Grant No. DCR-86-00378, and by NSF Engineering Research Centers Program NSFD CDR 88003012.     

Nanolayered lightweight flexible shields with multidirectional optical transparency

New nanolayered coatings are designed and deposited on flexible plastic substrate having the thickness of 100 /spl mu/m, in order to realize lightweight ultrathin transparent shielding foils. The structure of the coating is optimized considering three figures of merit: the average transmittance in the visible range for normal incidence, the normalized average transmittance for oblique incidence at 550 nm, and the transmittance quality factor. The nanotechnology exploited for the deposition of the transparent metals is the dual ion beam sputtering. Tests of durability, optical transmission, and shielding effectiveness demonstrate that the film has a high adhesion under mechanical solicitation, high resistance against aging, peak transmittance in the visible range higher than 70%, omnidirectional properties in the range 0/spl deg/-60/spl deg/, and shielding effectiveness of 40 dB up to 6 GHz.