Cutset enumeration of network systems with link and node failures

Network reliability analysis has received considerable attention and is thus widely studied to predict and prevent any network failure. However, most of such works presume perfectly reliable nodes. Although a few studies have considered both link and node failures, none of these methods has utilized the minimal paths or cuts, which are considered as fundamental approaches in the network reliability evaluation. An efficient method for deducing the minimal cutsets of a system subject to both link and node failures from the minimal cutsets of the system, which assumes perfect node reliability, is presented. The proposed method does not require re-enumeration of minimal cutsets for the additional consideration of the node failures. For a simple extension of such a method, the proposed approach can be embedded in any exact or approximate algorithm to account for link failures as well as node failures. As a result, the application of this method would be more realistic and valuable in practice for the reliability evaluation of networks with unreliable nodes.     

Functionalization of Electrospun Titanium Oxide Nanofibers with Silver Nanoparticles: Strongly Effective Photocatalyst

In the present study, we are introducing silver-doped titanium oxide nanofibers produced by electrospinning technique. Calcination of dry nanofiber mats consisting of silver nitrate–titanium isopropoxide/PVAc in air at 600°C for 1 h leads to produce Ag-doped titania nanofibers. Two dyes have been invoked to check the photocatalytic ability of the produced nanofibers; methylene blue dihydrate and methyl red. The obtained results indicated that the silver-doped titanium oxide nanofibers can eliminate >92% of the methylene blue dye within 10 min only. In a case of methyl red, almost the dye was decayed (93%) within 3 h.     

One‐Pot Thioetherification of Aryl Halides Using Thiourea and Alkyl Bromides Catalyzed by Copper(I) Iodide Free from Foul‐Smelling Thiols in Wet Polyethylene Glycol (PEG 200)

In this article, we have developed a new protocol for the thioarylation of structurally diverse alkyl bromides such as benzyl, cinnamyl, n‐octyl, cyclohexyl, cyclopentyl, and tert‐butyl bromides with aryl iodides, bromides and an activated chloride using thiourea catalyzed by copper(I) iodide in wet polyethylene glycol (PEG 200) as an eco‐friendly medium in the presence of potassium carbonate at 80 and 100 °C under an inert atmosphere. The process is free from foul‐smelling thiols which makes this method more practical for the thioetherification of aryl halides. Another important feature of this method is the variety of alkyl bromides which are commercially available for the in situ generation of thiolate ions with respect to the existing protocols in which the less commercially available thiols are directly used for the preparation of arylthio ethers.     

Polymeric nanofibers containing solid nanoparticles prepared by electrospinning and their applications

Generally, polymer solution or sol–gel is used to produce electrospun nanofibers via the electrospinning technique. In the utilized sol–gel, the metallic precursor should be soluble in a proper solvent since it has to hydrolyze and polycondensate in the final solution; this strategy straitens the applications of the electrospinning process and limits the category of the electrospinnable materials. In this study, we are discussing electrospinning of a colloidal solution process as an alternative strategy. We have utilized many solid nanopowders and different polymers as well. All the examined colloids have been successfully electrospun. According to the SEM and FE SEM analyses for the obtained nanofiber mats, the polymeric nanofibers could imprison the small nanoparticles; however, the big size ones were observed attaching the nanofiber mats. Successfully, the proposed strategy could be exploited to prepare polymeric nanofibers incorporating metal nanoparticles which might have interesting properties compared with the pristine. For instance, PCL/Ti nanofiber mats exhibited good bioactivity compared with pristine PCL. The proposed strategy can be considered as an innovated methodology to prepare a new class of the electrospun nanofiber mats which cannot be obtained by the conventional electrospinning technique.     

Influence of steel-concrete interface condition on galvanic corrosion currents in carbonated concrete

This paper presents specific experiments which were developed in order to assess galvanic currents in macrocell corrosion specimens involving active steel in carbonated concrete and passive steel in sound concrete. The influence of the steel-concrete interface condition on the galvanic current was also experimentally investigated. To focus on macrocell corrosion rate assessment, the initiation time of the corrosion process (concrete carbonation) was accelerated. FEM simulations were carried out in order to enhance the physical comprehension of these corrosion experiments. It was found that, in realistic condition, the electrical coupling of active and passive steel areas leads to high galvanic currents and consequently high corrosion levels according to RILEM recommendation. Moreover, steel-concrete interfacial defaults significantly increase the macrocell driving potential and, therefore, the galvanic corrosion current.     

Stochastic flow-shop scheduling with minimizing the expected number of tardy jobs

In this research, minimizing the expected number of tardy jobs in a dynamic m machine flow-shop scheduling problem, i.e., $ {F_m}\left| {{r_j}\left| {{\text{E}}\left[ {\sum {{U_j}} } \right]} \right.} \right. $ is investigated. It is assumed that the jobs with deterministic processing times and stochastic due dates arrive randomly to the flow-shop cell. The due date of each job is assumed to be normally distributed with known mean and variance. A dynamic method is proposed for this problem by which the m machine stochastic flow-shop problem is decomposed into m stochastic single-machine sub-problems. Then, each sub-problem is solved as an independent stochastic single-machine scheduling problem by a mathematical programming model. Comparison of the proposed method with the most effective rule of thumb for the proposed problem, i.e., shortest processing time first rule shows that the proposed method performs 23.9 % better than the SPT rule on average for industry-size scheduling problems.     

Effect of Reactor Ambient Pressure on the Morphology of Spray Dried Magnesium Sulphate Powders

The effect of reducing the reactor air pressure on the morphology of spray dried magnesium sulphate powders is investigated, experimentally. A reactor, capable of drying and pyrolyzing solution sprays at low pressures, is designed and manufactured. A vibrating mesh nebulizer is employed to generate the spray. Four different pressures, starting from 60 Torr to the atmospheric pressure, and two different reactor air temperatures of 130°C and 420°C, are considered. In addition, two different concentrations of magnesium sulphate solutions are tested. The results are explained based on the effect of reactor air pressure on the droplet evaporation rate.     

Fluorescent dye labeled bacteriophages--a new tracer for the investigation of viral transport in porous media: 1. Introduction and characterization

A new method for the study of pathogen transport in porous media is presented. The method is based on conjugation of fluorescent dyes to target bacteriophages and application of the modified bacteriophages for tracer studies. We demonstrate that the relevant transport determining properties of Rhodamine and several fluorescein-labeled phages are practically identical to those of the native bacteriophages. The advantages of the proposed method relative to direct enumeration of bacteriophages by plaque forming unit method, turbidity, fluorescent microspheres, and other alternative tracers are discussed. Notable advantages include simple quantitation by optical methods, unbiased signals even when virus aggregates are formed, and the ability to decouple inactivation kinetics from transport phenomena. Additionally, the signal reflects the removal and transport of the studied microorganism and not a surrogate.