A Genomics-Based Model for Prediction of Severe Bioprosthetic Mitral Valve Calcification

Severe bioprosthetic mitral valve calcification is a significant problem in cardiovascular surgery. Unfortunately, clinical markers did not demonstrate efficacy in prediction of severe bioprosthetic mitral valve calcification. Here, we examined whether a genomics-based approach is efficient in predicting the risk of severe bioprosthetic mitral valve calcification. A total of 124 consecutive Russian patients who underwent mitral valve replacement surgery were recruited. We investigated the associations of the inherited variation in innate immunity, lipid metabolism and calcium metabolism genes with severe bioprosthetic mitral valve calcification. Genotyping was conducted utilizing the TaqMan assay. Eight gene polymorphisms were significantly associated with severe bioprosthetic mitral valve calcification and were therefore included into stepwise logistic regression which identified male gender, the T/T genotype of the rs3775073 polymorphism within the TLR6 gene, the C/T genotype of the rs2229238 polymorphism within the IL6R gene, and the A/A genotype of the rs10455872 polymorphism within the LPA gene as independent predictors of severe bioprosthetic mitral valve calcification. The developed genomics-based model had fair predictive value with area under the receiver operating characteristic (ROC) curve of 0.73. In conclusion, our genomics-based approach is efficient for the prediction of severe bioprosthetic mitral valve calcification.     

A Novel Insight into the Cardiotoxicity of Antineoplastic Drug Doxorubicin

Doxorubicin is a commonly used antineoplastic agent in the treatment of many types of cancer. Little is known about the interactions of doxorubicin with cardiac biomolecules. Serious cardiotoxicity including dilated cardiomyopathy often resulting in a fatal congestive heart failure may occur as a consequence of chemotherapy with doxorubicin. The purpose of this study was to determine the effect of exposure to doxorubicin on the changes in major amino acids in tissue of cardiac muscle (proline, taurine, glutamic acid, arginine, aspartic acid, leucine, glycine, valine, alanine, isoleucine, threonine, lysine and serine). An in vitro interaction study was performed as a comparison of amino acid profiles in heart tissue before and after application of doxorubicin. We found that doxorubicin directly influences myocardial amino acid representation even at low concentrations. In addition, we performed an interaction study that resulted in the determination of breaking points for each of analyzed amino acids. Lysine, arginine, β-alanine, valine and serine were determined as the most sensitive amino acids. Additionally we compared amino acid profiles of myocardium before and after exposure to doxorubicin. The amount of amino acids after interaction with doxorubicin was significantly reduced (p = 0.05). This fact points at an ability of doxorubicin to induce changes in quantitative composition of amino acids in myocardium. Moreover, this confirms that the interactions between doxorubicin and amino acids may act as another factor most likely responsible for adverse effects of doxorubicin on myocardium.     

Effect of temperature on hot-air drying rate and on retention of antioxidant capacity in apple leathers

Fruit leathers are pectic gels, eaten as snack or dessert, obtained by dehydrating fruit purees. In this work, apple leathers were prepared by a hot-air drying process which allows the formation of a gel, following the “saccharide–acid–high methoxyl pectin” gelation mechanism. Leathers were produced at 50, 60 and 70 °C, from two formulations: control and added with potassium metabisulphite (KM) as antioxidant. The drying process was studied applying a diffusive model, while antioxidant capacity (AC) losses were represented by a first-order model. Activation energy for drying (20.6 kJ/mol) was lower than those estimated for AC losses in control (31.5 kJ/mol) and KM-added (37.9 kJ/mol) leathers. Therefore, the drying time reduction achieved by increasing air temperature is not sufficient to decrease AC losses in the range covered. AC retention decreased in both formulations at increasing air temperature. KM-added samples showed higher AC retention than the controls, except for those dried at 70 °C. Kinetic constants were lower for KM-added samples, suggesting a protective effect of the additive, especially at moderate air temperatures. In the most favorable situation, AC retention was of only 16%. Therefore, the functional character of these products may not be preserved if dried with hot air and the research on economically viable, less-severe drying technologies should be intensified.     

Emulsifier‐free reversible addition–fragmentation chain transfer emulsion polymerization of alkyl acrylates mediated by symmetrical trithiocarbonates based on poly(acrylic acid)

Emulsifier‐free batch emulsion polymerization of n‐butyl acrylate and its semi‐batch copolymerization with 2,2,3,3,4,4,5,5‐octafluoropentyl acrylate and 2,2,3,4,4,4‐hexafluorobutyl acrylate both mediated by poly(acrylic acid) containing the trithiocarbonate group in the chain was employed to produce amphiphilic triblock copolymers. The polymerization‐induced self‐assembly of these copolymers in aqueous media gave rise to spherical core–shell particles. Irrespective of the experimental conditions, the polymeric product was characterized by a bimodal molecular weight distribution. The apparent violation of the reversible addition–fragmentation chain transfer polymerization mechanism may be attributed to restricted accessibility of the trithiocarbonate group in the self‐assembled block copolymers for propagating radicals that enter into the particle. Mean‐field theoretical arguments were employed to explain the exclusively spherical morphology of the particles observed in the experiment. © 2019 Society of Chemical Industry     

Photoluminescence and energy transfer in transparent glass-ceramics based on GdF3:RE3+ (RE = Tb,Eu) nanocrystals

In the present work,the transparent oxyfluoride glass-ceramic samples containing GdF_3:RE~(3+)(RE=Tb,Eu) nanocrystals(nGCs) were fabricated via controlled heat-treatment of precursor xerogels prepared using a sol-gel method.The formation of GdF_3 nanocrystalline phase from gadolinium(III) trifluoroacetate was verified based on XRD measurements.The average crystal sizes calculated from Scherrer formula were estimated to～10 nm as well as～6 nm for Tb~(3+)-and Eu~(3+)-doped samples,respectively.The optical behavior of prepared sol-gel samples was evaluated based on photoluminescence excitation(PLE) and emission spectra(PL) as well as luminescence decay analysis.Obtained samples exhibit the ~5D_4→~7F_J(J=6-3,Tb~(3+))and the ~5D_0→~7F_J(J=0-4,Eu~(3+)) emission bands recorded within the visible spectral area under excitation at near-UV(393 nm(Eu~(3+)),351,369,378 nm(Tb~(3+))) as well as middle-UV illumination(273 nm(Gd~(3+))).Additionally,based on recorded decay curves,the luminescence lifetimes(τ_m) for the ~5D_4(Tb3+) and the ~5D_0(Eu~(3+))excited states were also evaluated.In general,recorded luminescence spectra and double-exponential character of decay curves for nGCs indicate a successful migration of Tb~(3+) and Eu~(3+) dopant ions from amorphous silicate framework to lowphonon energy GdF_3 nanocrystal phase.     

High-Performance Liquid Chromatography Method for the Monitoring of the <Emphasis Type="Italic">Allium</Emphasis> Derivative Propyl Propane Thiosulfonate Used as Natural Additive in Animal Feed

A new simple analytical method for monitoring propyl propane thiosulfonate (PTSO) in animal feed is presented. PTSO is an active ingredient from Allium spp. (like onion and shallot), proposed as a natural additive for feed being an efficient alternative to antibiotics used as growth promoter due to its efficiency improving animal health. Reversed-phase liquid chromatography with UV detection has been used and a previous sample treatment based on solid-liquid extraction has been developed and optimized in order to extract PTSO from a feed for laying hens using acetone as extraction solvent. The method has been characterized obtaining limits of detection and quantification of 11.2 and 37.3 mg kg^?1, respectively, which are lower than the concentrations expected in samples containing this additive. The intra- and interday relative standard deviations (RSDs) were lower than 8.3 % in all the cases, and recoveries varied from 90.2 to 94.6 %. Finally, in order to check the unequivocal identification of PTSO, mass spectrometry detection was applied. The proposed method is a simple procedure for monitoring PTSO in commercial feed, being possible to implement it in routine laboratories for quantification purposes and stability studies of the distributed products.     

Disruption management in the airline industry—Concepts,models and methods

This paper provides a thorough review of the current state-of-the-art within airline disruption management of resources, including aircraft, crew, passenger and integrated recovery. An overview of model formulations of the aircraft and crew scheduling problems is presented in order to emphasize similarities between solution approaches applied to the planning and recovery problems. A brief overview of research within schedule robustness in airline scheduling is included in the review, since this proactive measure is a natural complement to disruption management.     

Polarizability,Susceptibility, and Dielectric Constant of Nanometer‐Scale Molecular Films: A Microscopic View

The size‐dependence of the polarizability, susceptibility, and dielectric constant of nanometer‐scale molecular layers is explored theoretically. First‐principles calculations based on density functional theory are compared to phenomenological modeling based on polarizable dipolar arrays for a model system of organized monolayers composed of oligophenyl chains. Size trends for all three quantities are primarily governed by a competition between out‐of‐plane polarization enhancement and in‐plane polarization suppression. Molecular packing density is the single most important factor controlling this competition and it strongly affects the bulk limit of the dielectric constant as well as the rate at which it is approached. Finally, the polarization does not reach its “bulk” limit, as determined from the Clausius–Mossotti model, but the susceptibility and dielectric constant do converge to the correct bulk limit. However, whereas the Clausius–Mossotti model describes the dielectric constant well at low lateral densities, finite size effects of the monomer units cause it to be increasingly inaccurate at high lateral densities.     

Effect of metal purity and testing procedure on surface tension measurements of liquid tin

The surface tension of liquid tin of three different grades of purity (99.85, 99.96, and 99.999%) was measured by the classical sessile drop method over the temperature range 523–1023 K, in heating and cooling regimes. The results obtained show that the metal purity affects the values of surface tension and its temperature dependence. The highest values of surface tension and smooth linear temperature dependence were obtained in cooling regime for tin of the highest purity. With increasing content of impurities, both surface tension and its temperature coefficient decrease while the scatter of the data increases. The surface tension values measured on heating regime show higher scatter, compared to those obtained in cooling regime, and the temperature dependence of the surface tension is curvilinear rather than linear.