Electromagnetic radiation shielding by composites of conducting polymers and wood

Polyaniline or polypyrrole composites with fir or oak wood have been prepared by in situ polymerization of the corresponding monomers in an aqueous suspension of wood sawdust. The percolation threshold of compressed coated particles is located below 5 wt % of the conducting component and, above this limit, the conductivity of most composites was higher than 10^?3 S cm^?1. The conductivity of composites containing ca 30 wt % of conducting polymer was of the order of 10^?1 S cm^?1, an order of magnitude lower than that of the corresponding homopolymers, polyaniline and polypyrrole. The conductivity stability has been tested at 175°C. The polypyrrole‐based composites generally lasted for a longer time than pyrrole homopolymers, also on account of the improved mechanical integrity of the samples provided by the presence of wood. The reverse order was found with polyaniline composites. The dielectric properties of the composites were determined in the range of 100 MHz–3 GHz, indicating that thick layers of composite material, ～ 100 mm, are needed for the screening of the electromagnetic radiation below ?10 dB level in this frequency range. Nevertheless, considering the potential production cost of composites and their low weight, such composite materials could be of practical interest in the shielding of electromagnetic interference. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 807–814, 2005     

Electrochemical synthesis: a novel technique for processing multi-functional coatings

Electrochemical synthesis is a powerful tool for surface modification, substrate cleaning and formulation of thin films and bulk materials. It is especially suited for surface modification of fibers, metals and films. In the past decade electrochemical method has become the preferred technique for in situ passivation, and coating of commodity metals such as aluminum, zinc, copper and steel.

We have successfully synthesized different kinds of conducting polymers, including polypyrrole (PPy)–polyaniline (PANi) composites. The processability and corrosion performance of PPy/PANi, composite coatings are significantly better than those for either PPy or PANi, coatings.

In this paper, we will discuss the use of electrochemical technique in the synthesis and characterization of multi-functional corrosion resistant conducting polymer coatings for aerospace and automotive applications.     

Isobutylaluminum aryloxides as metallocene activators in Homo‐ and copolymerization of olefins

The article describes that sterically hindered isobutylaluminum aryloxides with bulky ^tBu substituents at 2,6‐ positions of aryl fragment, i.e. (2,6‐di‐^tBu,4‐R‐C₆H₂O)AlⁱBu₂ (R = H ( 1‐DTBP ), Me ( 1‐BHT ), ^tBu ( 1‐TTBP )) and (2,6‐di‐^tBu,4‐R‐C₆H₂O)₂AlⁱBu (R=H( 2‐DTBP ), Me( 2‐BHT )) can serve as cocatalysts for metallocene complexes. Isobutylaluminum aryloxides have been applied for activation of rac‐Et(2‐MeInd)₂ZrMe₂ in homopolymerization of ethylene, propylene, copolymerization of ethylene and propylene, and terpolymerization of ethylene, propylene, and 5‐ethylidene‐2‐norbornene at Al/Zr = 300 mol/mol. The type of R substituent at 4‐position has a significant effect on catalyst activity. The catalytic system with 1‐TTBP showed the highest activity in all homo‐ and copolymerization processes. Diisobutylaluminum aryloxides provide much higher activity to the systems in all polymerization processes and stronger ability for propylene incorporation in copolymer than diaryloxides. The activities of the systems with isobutylaluminum aryloxides are similar or exceed that of the system with MAO as activator as have shown for propylene polymerization. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43276.     

Exposure parameters for MeV proton beam writing on SU-8

Proton beam writing was performed on a lithographic resist to determine the main parameters required to achieve the minimum feature size, maximum pattern lateral density and maximum aspect ratio. A 2.5 MeV proton beam focused to sizes between 1.5 and 2.5 μm was used to expose SU-8 negative resist. The number of protons per pixel was varied in the exposure of SU-8 with thicknesses between 5 and 95 μm. Patterns consisting of single pixels, single-pixel lines and multi-pixel areas with different densities were fabricated. The smallest structures achieved were posts 1.5 μm in diameter with 4:1 structure-space ratio in 15 μm thick resist and the highest aspect ratio structures of 20:1 in 40 μm resist were produced. It was found that the minimum feature size depended only on the beam size, and ±10% post size accuracy could be achieved within 40-70% variation of the number of protons. MeV proton beam allows a direct fabrication of complex shapes without a mask in single-step irradiation and, in addition, no proximity correction is needed. We present examples of MeV proton beam written single and multi-pixel microstructures with easily reproducible high aspect ratios and densities.     

Reviewing 25 Years of Testing Technique Experiments

Mature knowledge allows engineering disciplines the achievement of predictable results. Unfortunately, the type of knowledge used in software engineering can be considered to be of a relatively low maturity, and developers are guided by intuition, fashion or market-speak rather than by facts or undisputed statements proper to an engineering discipline. Testing techniques determine different criteria for selecting the test cases that will be used as input to the system under examination, which means that an effective and efficient selection of test cases conditions the success of the tests. The knowledge for selecting testing techniques should come from studies that empirically justify the benefits and application conditions of the different techniques. This paper analyzes the maturity level of the knowledge about testing techniques by examining existing empirical studies about these techniques. We have analyzed their results, and obtained a testing technique knowledge classification based on their factuality and objectivity, according to four parameters.     

The effects of D1 or D2 dopamine receptor antagonism in the medial preoptic area, ventral pallidum, or nucleus accumbens on the maternal retrieval response and other aspects of maternal behavior in rats.

The medial preoptic area (MPOA), ventral pallidum (VP), and nucleus accumbens (NA) receive dopaminergic afferents and are involved in maternal behavior. Experiments investigated whether dopamine (DA) receptor antagonism in NA disrupts maternal behavior, determined the type of DA receptor involved, and investigated the involvement of drug spread to VP or MPOA. Injection of SCH 23390 (D1 DA receptor antagonist) into NA of postpartum rats disrupted retrieving at dosage levels that were ineffective when injected into MPOA or VP. Motor impairment was not the cause of the deficit. Injection of eticlopride (D2 DA receptor antagonist) into NA or VP was without effect. Results emphasize the importance of DA action on D1 receptors in NA for retrieval behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Interplay Between Conducting and Magnetic Systems in the Antiferromagnetic Organic Superconductor <Emphasis Type="Italic">κ</Emphasis>-(BETS)<Subscript>2</Subscript>FeBr<Subscript>4</Subscript>

The mutual influence of the conduction electron system provided by organic donor layers and magnetic system localized in insulating layers of the molecular charge transfer salt κ-(BETS)₂FeBr₄ has been studied. It is demonstrated that besides the high-field re-entrant superconducting state, the interaction between the two systems plays important role for the low-field superconductivity. The coupling of normal-state charge carriers to the magnetic system is reflected in magnetic quantum oscillations and can be evaluated based on the angle-dependent beating behavior of the oscillations. On the other hand, the conduction electrons have their impact on the magnetic system, which is revealed through the pressure-induced changes of the magnetic phase diagram of the material.     

Designing Efficient Energy Funneling Kinetics in Ruddlesden–Popper Perovskites for High‐Performance Light‐Emitting Diodes

Mixed Ruddlesden–Popper (RP) perovskites are of great interest in light‐emitting diodes (LEDs), due to the efficient energy transfer (funneling) from high‐bandgap (donor) domains to low‐bandgap (acceptor) domains, which leads to enhanced photoluminescence (PL) intensity, long PL lifetime, and high‐efficiency LEDs. However, the influence of reduced effective emitter centers in the active emissive film, as well as the implications of electrical injection into the larger bandgap donor material, have not been addressed in the context of an active device. The electrical and optical signatures of the energy cascading mechanisms are critically assessed and modulated in a model RP perovskite series ((C₈H₁₇NH₃)₂(CH(NH₂)₂)_m?1Pb_mBr_3m+1). Optimized devices demonstrate a current efficiency of 22.9 cd A^?1 and 5% external quantum efficiency, more than five times higher than systems where funneling is absent. The signature of nonideal funneling in RP perovskites is revealed by the appearance of donor electroluminescence from the device, followed by a reduction in the LED performance     

Decolorization of ionic liquids for spectroscopy

It has been widely recognized that although ionic liquids should be colorless, they are frequently not. Colored samples appear to be pure by most analytical techniques (e.g., NMR spectroscopy, mass spectrometry, HPLC, and ion chromatography), and there have been many attempts to identify the source of color in our own laboratories and others-after 20 years the best that can be said is that the impurities are at a very low level (probably parts per billion) with very high molar extinction coefficients. In this paper, we do not identify these impurities but describe a practical method for removing them for spectrochemical applications. We clearly note that the method is not "green", but we anticipate that it will only be applied to the small volumes of ionic liquids required for fundamental spectroscopic studies in academia but not in industrial processes.     

Assessment of biocompatibility of chronically implanted polyimide and platinum intrafascicular electrodes

Longitudinal intrafascicular electrodes (LIFEs) are electrodes designed to be placed inside the peripheral nerve to improve stimulation selectivity and to increase the recording signal-to-noise ratio. We evaluated the functional and morphological effects of either Pt wire LIFEs or polyimide-based thin-film LIFEs implanted in the rat sciatic nerve for 3 mo. The newly designed thin-film LIFEs are more flexible, can be micromachined and allow placement of more active electrode sites than conventional Pt LIFEs. Functional results at 1 mo indicated an initial decline in the nerve conduction velocity and in the amplitude of muscle responses, which recovered during the following 2 mo towards normal values. Morphological results showed that both types of LIFEs induced a mild scar response and a focal but chronic inflammatory reaction, which were limited to a small area around the electrode placed in the nerve. Both types of LIFEs can be considered biocompatible and cause reversible, minimal nerve damage.