A fully bio-based monomer derived from undecylenic acid,glycerol, and CO2 useful for the synthesis of polyhydroxyurethanes

Undecylenic acid, glycerol, and CO₂ were used as building blocks for obtaining a fully bio-based carbonated monomer, useful for polyurethanes. The functionality of the monomer was close to 3 cyclic carbonates/mol, located in terminal positions. In a first stage, a synthetic triglyceride was obtained with 99% selectivity by esterification of glycerol and undecylenic acid at 160°C. The triglyceride was then epoxidized using H₂O₂ and Amberlyst 15 or Amberlite IR-120 acidic exchange resins at 57°C. The selectivity to epoxide was kept constant at 98% using Amberlite IR-120. Terminal cyclic carbonates were then inserted through epoxide moieties under mild conditions by the chemical fixation of CO₂ at 80°C and 6 MPa in 6 h. A complete conversion was obtained in 6 h reaction while the selectivity to carbonate groups was near to 99% during all the reaction time. An elastomeric polyhydroxyurethane was obtained by aminolysis of the carbonated monomer with ethylenediamine at 70°C, affording a Young's modulus of 22.6 MPa and T_g of −15.2°C. The material showed a good thermal stability below 240°C.     

Profiling glucosinolates in vegetative and reproductive tissues of four Brassica species of the U‐triangle for their biofumigation potential

Glucosinolates are amino acid derived allelochemicals present in all plants of the order Capparales. These compounds are degraded by myrosinase isoenzymes, releasing a series of biologically active products defined by the parent glucosinolate and the reaction conditions. Species within the Brassicaceae are found to differ in their glucosinolate profile and glucosinolate concentrations. Different tissues within a single plant also show such variations, which are further influenced by the growth stage and environmental conditions. In the experiments described in this paper, four Brassica species of the U‐triangle (B. carinata, B. nigra, B. juncea and B. rapa) were compared with respect to their glucosinolate profiles in roots, stems, leaves and reproductive organs at different developmental stages. The glucosinolate profile of corresponding ripe seeds was also determined. Prop‐2‐enylglucosinolate was identified as the major glucosinolate in the three mustards, where it represented over 90% of the total glucosinolate concentration of ripe seeds and over 50% of green tissues. The relative concentration of this glucosinolate increased in all tissues during plant growth. Brassica rapa showed a different glucosinolate profile than the three mustards, with higher concentrations of but‐3‐enylglucosinolate, 2‐hydroxybut‐3‐enylglucosinolate and 2‐hydroxypent‐4‐enylglucosinolate. The concentration of indol‐3‐ylmethylglucosinolates was also higher in B. rapa than in the mustard plants, with 4‐hydroxyglucobrassicin representing 30% of the total glucosinolate concentration in ripe seeds. The total glucosinolate concentration of the species studied varied with growth stage and the mustards achieved a maximum towards the end of the period monitored. Glucosinolate concentration decreased in roots and leaves but increased in reproductive tissues. The determined glucosinolate profiles are an initial step in assessing the biofumigation potential of these species of the Brassicaceae family. Copyright © 2007 Society of Chemical Industry     

Characterization of Edible Active Coating Based on Alginate–Thyme Oil–Propionic Acid for the Preservation of Fresh Chicken Breast Fillets

Chicken meat presents serious problems of processing and storage. Edible coatings are used commercially to improve the shelf life of fresh foods. The aim of this study is to develop an effective antimicrobial edible coating to improve the shelf life and safety of fresh chicken meat. The effect of propionic acid and thyme essential oils as antimicrobial and antioxidant compounds incorporated into alginate‐based edible coating was evaluated. Physical, antimicrobial and sensorial analyses were performed in coated and uncoated samples. Sensorial analysis showed no significant differences between coated and uncoated samples, which do not influence the buying decisions of consumers. The pH of the meat surface, color and sensorial analysis changed during storage time, showing similar behavior between coatings, the principal parameters to determine the shelf life of this product were weight loss and microbiological deterioration, where coatings had different behaviors. The selected coating increased the shelf life by about 33% with the lowest dehydration.     

Formation Routes of Nanocomposite Coatings in Detonation Spraying of Ti3SiC2-Cu Powders

In thermally sprayed coatings, nano-sized features of the microstructure may be either inherited from the nanostructured agglomerates of the feedstock powder or form as a result of rapid cooling of molten particles upon deposition. Applying a process of the computer-controlled detonation spraying (CCDS) to Ti₃SiC₂-Cu composite powders produced by high-energy mechanical milling, we show that both routes are possible depending on the spraying conditions. When the nanostructure of the Ti₃SiC₂-Cu coating is inherited from the feedstock powder—under very mild conditions of detonation spraying, which exclude melting, so is the phase composition of the coating. In higher-temperature conditions of spraying, a significant fraction of the copper matrix melts and the interaction between Ti₃SiC₂ and Cu occurs. The TiC _x -Cu(Si) coatings that form show crystallites of both phases in the nano-range. In this case, rapid solidification of the molten fraction of the particles is responsible for the formation of the coatings with a nanostructured matrix. Due to the flexibility of the CCDS process, conditions of spraying were found such that a composite coating with very fine crystallites of the Cu(Si) matrix (30 nm) and a hardness of 273 HV could be obtained.     

Metal Triflates Incorporated in Mesoporous Catalysts for Green Synthesis of Fine Chemicals

Strong Lewis acid SnTf-MCM-41 and SnTf-UVM-7 catalysts with unimodal and bimodal pore systems were prepared in a two-step synthesis in which the triflic acid (Tf) was incorporated into previously synthesized mesoporous tin-containing silicas. The Sn incorporation inside the pore walls was carried out through the Atrane method. The SnTf-UVM-7 catalysts were prepared by aggregating nanometric mesoporous particles defining a hierarchic textural-type additional pore system. Catalysts with different Si/Sn ratios in the range 21.8–50.8 for SnTf-MCM-41 and 18.4 for SnTf-UVM-7 were found to be efficient catalysts for the acylation of aromatics and heteroaromatics. Under microwave irradiation the reaction was possible even with acetic acid. The selectivity to the desired product (o-hydroxyacetophenone for phenol) or the unfavored three-substituted five ring heterocycles was dramatically increased under these conditions. The process is green, environmentally safe, and heterogeneous.     

Pruritus in hemodialysis patients: The problem remains

Pruritus is still one of the most common and disturbing symptoms of end-stage renal disease. The objective of this study is to analyze the prevalence of pruritus in hemodialysis patients and the possible factors implicated in its genesis. In a cross-sectional study, 101 patients on hemodialysis at our center were screened for pruritus. The relationship of various factors with pruritus was evaluated. Of the 101 patients included, 31(30.7%) had pruritus at the time of examination. Patients with pruritus were significantly older than those without pruritus (P=0.0027). Pruritus tended to be more prevalent in patients undergoing dialysis 3 times a week than in those undergoing daily dialysis, but the difference did not reach statistical significance (P=0.0854). Lower transferrin saturation levels were found in patients with pruritus than in those without pruritus (P=0.0144). C-reactive protein levels were significantly higher in patients with pruritus than in those without pruritus (P=0.0013). There was no significant difference between the groups in the levels of the other inflammatory biomarkers measured. However, there was a tendency toward a correlation between the levels of α-1-glycoprotein and the intensity of pruritus (P=0.0834). Our results suggest a possible relationship of the inflammatory response upregulation to pruritus. Additionally, there was a positive relationship between pruritus and iron deficiency, possibly associated with inflammatory elevation of hepcidin. A better understanding of the factors implicated in the genesis of pruritus related to end-stage renal disease is crucial in the development of more effective treatments for this symptom.     

Structure Determination of the Top‐Loop of the Conserved 3′‐Terminal Secondary Structure in the Genome of Flaviviruses

To what extent small differences in RNA sequences (mutations) can have a profound impact on biology remains an intriguing question. This effect can be studied by using untranslated RNA regions as a model. We have studied the influence of mutations on the structure of an RNA hairpin that occurs in the 3′‐untranslated region (UTR) of Flaviviridae, and is known to have a large impact on the vector dependency of flaviviruses. Three related RNA sequences were studied by NMR spectroscopy. The selected sequences represent each one of the three clusters in the flavivirus genes (mosquito‐borne, tick‐borne, and no‐known‐vector viruses). A new strategy was used to obtain chemical shift signatures of carbonyl atoms in unlabeled uridine nucleobases to characterize their involvement in hydrogen bonding. Clear differences occur in the structures and stacking pattern of the three RNA hairpins. The observed differences cannot be predicted based on sequence analysis. A different biology can be correlated with a different RNA tertiary structure. The underlying biological mechanism, however, remains to be studied.     

Preparation and physicochemical characteristics of cryogel based on gelatin and oxidised dextran

In this study, a novel method of preparation of cryogels based on oxidised dextran (Ox.D) and gelatin (Gel) without sodium borohydride is proposed. The physico-chemical properties of obtained hydrogels were investigated. It was found that the stability of cryogels Ox.D–Gel is significantly depended on pH, and mechanical properties were improved after the freeze drying. The schemes of the reactions between Ox.D and Gel at different steps of the treatment of the material were suggested. According to ¹H-NMR data, the Amadori rearrangement occurred under the step of cryogelation. The increase of cross-linking degree through the formation of additional Schiff’s base group was observed as a result of incubation at high humidities or elevated temperature (60 °C). The obtained cryogels can be used as biocompatible and biodegradable scaffolds for proliferation of cells or other biomedical applications.