Issues in building dynamic real-time systems

The issues involved in building dynamic, hard real-time systems, in which resource availability and requirements are not fixed, are discussed. It is shown that the problem of ensuring timing correctness in dynamic real-time systems has three aspects: resource requirements, resource availability, and guarantees. These issues overlap, and a single mechanism or technique may address several issues. The R-Shell, an object-oriented framework that structures resources in a class hierarchy so that they can be selected or substituted dynamically is described     

Growth and development ofThiobacillus ferrooxidans for engineering applications

A bioprocessing approach for the extraction of base, nuclear and precious metals from refractory and lean grade ores has been reviewed in this paper. Characteristic morphological features ofThiobacillus ferrooxidans, the organism which has been extensively used for biooxidation of sulphide ores have been discussed. Mechanisms of chemoautotrophy and mineral oxidation have been illustrated. The current engineering applications of this microorganism have also been brought out. Various methods for accelerating the growth ofThiobacillus ferrooxidans for faster biooxidation and genetic manipulation for development of desired strains have been outlined.     

Preventive health care for children

This article discusses immunization, development, vision, blood pressure, dentition, behavioral, and environmental screening for preschool children. The authors then discuss screening for children in the early school years. Injury and violence prevention and topics of sexuality for the preadolescent are also presented.     

In-situ observation of faceted growth of benzophenone single crystals

Melt growth of benzophenone was in-situ observed under various cooling rate and temperature gradient. The melt growth experiments were performed for various cooling rate of melt and various temperature gradients. The movement of growth interface with time was measured for various growth faces such as (001), (101) and (011) and the growth rates of the respective faces were calculated. It was found that the growth rate of all the faces increased with cooling rate of the melt. Steady state growth was observed in the experiments with low temperature gradient while, the steep gradient leads to unstable growth of crystal. The observed growth rate variation was explained using the attachment energy model.     

High temperature rate coefficient for the reaction of O(P) with H2 obtained by the resonance absorption of O and H atoms

The reaction of O(³P) with H₂ has been studied behind reflected shock waves in the temperature range of 1713–3532K at total pressures of about 1.4–2.0 bar by Atomic Resonance Absorption Spectroscopy using mixtures of N₂O and H₂ highly diluted in Ar. The O atoms were generated by the fast thermal decomposition of N₂O and the reaction with H₂ was followed by monitoring the time dependent O and H atom concentrations in the postshock reaction zone. For the experimental conditions chosen, the measured O and H atom concentrations were primarily sensitive to the well-known N₂O dissociation and to the studied reaction and hence its rate coefficient could be deduced. The measured rate coefficient data are fitted by the least-squares method to obtain the following three parameter expression: K₄=3.72×10⁶(T/K)^2.17exp(−4080K/T)cm³ mol⁻¹8⁻, which is in excellent agreement with the recent ab initio calculations for the rate coefficient of this reaction in the overlapping temperature range. The present result is also compared to the experimental results reported by earlier investigators.     

A study on defect controlled morphology of Organic/Inorganic composite nanofibers with different heat flow rates

One dimensional nanofibers of organic and inorganic materials have been used in filters, optoelectronic devices, sensors etc. It is difficult to obtain ultra fine fibers of inorganic materials having lengths in the order of millimeter as they tend to break during formation due to thermal and other mechanical stresses. In this study, we have investigated the mechanism to prevent the defect formation and the breaking ZnO nanofibers by using optimized heat flow rates. ZnO nanofibers were obtained by heat treating the PVA composites fibers formed by electrospinning. The morphology and structural characteristic of prepared samples were investigated by Scanning electron microscopy and X-ray diffraction. It was found that the morphology of the composite and annealed nanofibers could be influenced by the concentration of the polymer content and heat flow rate during thermal treatment respectively. A lower concentration favors the formation of defects along the fiber and the number of defects reduces when the concentration is increased. The reasons for the formation of defects and their reduction, and the observed structural changes of ZnO nanofibers during heat treatment are also discussed.     

Flexible polymer microtubes and microchannels via electrospinning

Here we report an approach to fabricate flexible polymer self standing films embedded with continuous aligned microtubes/microchannels via electrospinning. The scheme is to wash the electrospun fibers selectively to form either microtubes/microchannels. Optical microscope (OM) and Scanning electron microscope images are evident for the well aligned microtubes and microchannels respectively with a diameter of ~ 8 μm and a length of ~ 4 cm. Meniscus of tetrahydrofuran in the microtubes can be observed explicitly in the OM images. Mutually perpendicular microtubes are also fabricated on a polymer film. Angular distribution of aligned microstructures indicates the standard deviation is not more than 1°. These tubes/channels can be potential for tissue engineering as they could provide a directional template for the growth when a biodegradable polymer such as Poly(vinylalcohol) is used.     

Vibrational excitations in molecular layers probed by ballistic electron microscopy

We demonstrate the information on molecular vibrational modes via the second derivative (d(2)I(B)/dV(2)) of the ballistic electron emission spectroscopy (BEES) current. The proposed method does not create huge fields as in the case of conventional derivative spectroscopy and maintains a zero bias across the device. BEES studies carried out on three different types of large polycyclic aromatic hydrocarbon (PAH) molecular layers show that the d(2)I(B)/dV(2) spectra consist of uniformly spaced peaks corresponding to vibronic excitations. The peak spacing is found to be identical for molecules within the same PAH family though the BEES onset voltage varies for different molecules. In addition, injection into a particular orbital appears to correspond to a specific vibrational mode as the manifestation of the symmetry principle.