Moisture barrier and physical properties of acetylated derivatives with increasing acetylation degree

Four acetostearin products with increasing acetylation degree were synthesized by chemical interesterification followed by fractionation/blending stages. Their physical properties and functional barrier properties were studied and compared to the properties of technical tristearin. Increasing acetylation degree (AD) modified the triacylglycerols crystal habits and probably led to an increase in acyl chain fluidity, which induced, at macroscopic levels, a decrease in solid fat content (SFC), in melting point, in surface and bulk material hydrophobicity, and an increased moisture effective diffusivity. Water vapor permeability (WVP) coefficients of the materials were partially influenced by the AD factor, but also by the development of macroscopic cracks in lipids presenting high SFC. Acetylated stearin up to 47% (acetyl mol/mol of esterified chain) presented the lowest WVP at 20 °C resulting from an adequate balance between hydrophobicity and mechanical properties of the material.     

Cold Compaction and Solid-State Sintering of WC-Co-Based Structures: Experiments and Modeling

Cold compaction (200-1900 MPa) and sintering (1250°-1350°C) of cermets based on WC-Co were experimentally studied using die compaction, cold isostatic pressing, sintering, and creep tests. Two different-sized WC powders were used. The cobalt content varied over a range of 10-30 wt%. Cold-compaction behavior has been described by using a Cam-Clay model. Die-wall friction was measured by using green powder compacts that had different aspect ratios. Friction coefficients were 0.28-0.85, depending on the WC particle size and cobalt content. Simple constitutive equations have been used to model the high-temperature behavior (sintering and creep). The constitutive equations were implemented in a finite-element program to model the compaction, ejection, and sintering of bilayer structures that had different cobalt contents. The model can represent the effect of die-wall friction on the average density, as well as deformation inside the green compact. Density gradients were generated; they were revealed during sintering, because the compact does not deform homogeneously. Simulation also can be used to evaluate deformations that are induced by sintering.     

Modéle complet des circuits à résonateur radial

The purpose of this paper is to present part of a computer aided design model which was developed for the analysis of millimeter wave rectangular waveguide circuits. This paper focuses on cap resonator circuits and pre-tuned modules for Gunn andimpatt oscillators in the W band. The theoretical results were verified through comparisons with experiments performed in the Ku band. The influence of the main cap circuit parameters are analyzed in order to provide a guidance for theptm design.     

13.3% efficient solution deposited Cu(In,Ga)Se2 solar cells processed with different sodium salt sources

In this work, we obtain the highest reported power conversion efficiency (13.3%) for sulfur‐free CIGSe solar cells by solution processing. Intentional sodium incorporation is achieved directly by dissolving sodium salts in the ink. The effect on solar cell properties of three sodium sources is investigated: NaCl, NaHCO₂, and NaSCN. A comparison is made with absorbers grown on soda‐lime glass substrates and in the absence of sodium sources. The incorporation via sodium salts yields significantly better results, which is attributed to enhanced‐sodium availability. A comparison with identically annealed sputtered metal precursor layers capable of delivering 15.1% module efficiency suggests that the cell results are limited by the selenization procedure. Copyright © 2015 John Wiley & Sons, Ltd.     

Conducting polyaniline composite: From syntheses in waterborne systems to chemical sensor devices

The development of a conducting composite from its one-step synthesis in aqueous dispersed medium to the characterization of its chemical sensor performance is detailed. Composite films of polyaniline and polyacrylate were processed from the crude dispersion with no need for post-formulation. The synthesis has been optimized to be as simple, cheap and transferable as possible. The composite composition is tunable, i.e. the nature of the dopant was varied and its effect on kinetic parameters was observed. Ab initio calculations have been performed on a series of six ionic systems to gain a deeper insight into the contribution of both the stability of the anilinium salts in the composite polymerization. The conductivities of all composites were recorded from room temperature to 150 °C and the thermal stability versus dopant highlighted. The conducting films were then studied as active layers in a chemical sensor. The results showed that these composites, easily synthesized and processed, are ammonia sensitive and exhibit a fast response when exposed to air pollution.     

Control of morphology and nanostructure of copper and cobalt oxalates: effect of complexing ions, polymeric additives and molecular weight

Precipitated oxalates are often nanostructured and can be used as precursors for nanostructured oxides for different applications. The modification of the particle shape and nanostructures of both copper and cobalt oxalates has been demonstrated using polymeric additives or complexing counter-ions. In the case of cobalt oxalate the characteristic elongated rod particle shape (axial ratio of 10) can be modified by using polymethymethacrylate (PMMA) to produce particles with lower axial ratios of 2, through cubes all the way to platelets (axial ratio 0.2). The PMMA inhibits the growth of the particles along the [101] direction more and more strongly as the concentration of the polymer increases. The crystallite size from XRD line broadening is not modified by the PMMA indicating that the PMMA does not influence the nucleation and growth but modifies the aggregation kinetics. Copper oxalates precipitated in the presence of different cellulose derived polymers with different molecular weights and functional groups (methyl and propyl) showed sensitivity to both molecular weight and functional group. Higher molecular weights did not influence the copper oxalate particle shape, whereas methyl cellulose gave elongated particles and propyl celluloses gave platelet like particles. Copper oxalate precipitated in the presence of acetate counter ions gave platelets with an axial ratio of 0.15 compared to the cushion-like morphology (axial ratio 0.5). The primary crystallites were more elongated along the [001] direction in the presence of acetate, modifying the proportion of the hydrophobic and hydrophilic surfaces and hence influencing the aggregation kinetics and particle shape. The copper and cobalt oxalate particle formation seems to be dominated by the primary particle aggregation with the different additives interacting specifically with different crystallographic faces of the primary particles. By tuning this interaction particles with different shapes and substructures can be formed.     

Sharing the ‘fame’ of ISO standard adoption: quality supply chain effects evidence

The objective of this paper is to provide an empirical evidence for whether the hierarchical position (determined by firm’s quality strength) of different types of quality supply chain categories implies the same hierarchy in terms of economic gains. Using data collected in France through a survey, we distinguish between four types of quality supply chain categories that help us to empirically construct a relationship between firms and their suppliers (quality certified/non-quality certified). Our findings, from a two-regime switching model, reveal that there is a positive correlation between the hierarchical positions of the quality supply chain categories and the impact on firm performance (measured by profit per employee).