13.3% efficient solution deposited Cu(In,Ga)Se2 solar cells processed with different sodium salt sources

In this work, we obtain the highest reported power conversion efficiency (13.3%) for sulfur‐free CIGSe solar cells by solution processing. Intentional sodium incorporation is achieved directly by dissolving sodium salts in the ink. The effect on solar cell properties of three sodium sources is investigated: NaCl, NaHCO₂, and NaSCN. A comparison is made with absorbers grown on soda‐lime glass substrates and in the absence of sodium sources. The incorporation via sodium salts yields significantly better results, which is attributed to enhanced‐sodium availability. A comparison with identically annealed sputtered metal precursor layers capable of delivering 15.1% module efficiency suggests that the cell results are limited by the selenization procedure. Copyright © 2015 John Wiley & Sons, Ltd.     

Conducting polyaniline composite: From syntheses in waterborne systems to chemical sensor devices

The development of a conducting composite from its one-step synthesis in aqueous dispersed medium to the characterization of its chemical sensor performance is detailed. Composite films of polyaniline and polyacrylate were processed from the crude dispersion with no need for post-formulation. The synthesis has been optimized to be as simple, cheap and transferable as possible. The composite composition is tunable, i.e. the nature of the dopant was varied and its effect on kinetic parameters was observed. Ab initio calculations have been performed on a series of six ionic systems to gain a deeper insight into the contribution of both the stability of the anilinium salts in the composite polymerization. The conductivities of all composites were recorded from room temperature to 150 °C and the thermal stability versus dopant highlighted. The conducting films were then studied as active layers in a chemical sensor. The results showed that these composites, easily synthesized and processed, are ammonia sensitive and exhibit a fast response when exposed to air pollution.     

Control of morphology and nanostructure of copper and cobalt oxalates: effect of complexing ions, polymeric additives and molecular weight

Precipitated oxalates are often nanostructured and can be used as precursors for nanostructured oxides for different applications. The modification of the particle shape and nanostructures of both copper and cobalt oxalates has been demonstrated using polymeric additives or complexing counter-ions. In the case of cobalt oxalate the characteristic elongated rod particle shape (axial ratio of 10) can be modified by using polymethymethacrylate (PMMA) to produce particles with lower axial ratios of 2, through cubes all the way to platelets (axial ratio 0.2). The PMMA inhibits the growth of the particles along the [101] direction more and more strongly as the concentration of the polymer increases. The crystallite size from XRD line broadening is not modified by the PMMA indicating that the PMMA does not influence the nucleation and growth but modifies the aggregation kinetics. Copper oxalates precipitated in the presence of different cellulose derived polymers with different molecular weights and functional groups (methyl and propyl) showed sensitivity to both molecular weight and functional group. Higher molecular weights did not influence the copper oxalate particle shape, whereas methyl cellulose gave elongated particles and propyl celluloses gave platelet like particles. Copper oxalate precipitated in the presence of acetate counter ions gave platelets with an axial ratio of 0.15 compared to the cushion-like morphology (axial ratio 0.5). The primary crystallites were more elongated along the [001] direction in the presence of acetate, modifying the proportion of the hydrophobic and hydrophilic surfaces and hence influencing the aggregation kinetics and particle shape. The copper and cobalt oxalate particle formation seems to be dominated by the primary particle aggregation with the different additives interacting specifically with different crystallographic faces of the primary particles. By tuning this interaction particles with different shapes and substructures can be formed.     

D.C. scanning thermal microscopy: Characterisation and interpretation of the measurement

The used Scanning Thermal Microscopy (SThM) probe is a thin Pt resistance wire acting as a heat source and as a detector simultaneously. Its energetic balance is investigated by the study of the temperature profile along the probe. A theoretical approach of the measurement, based on this investigation, is then proposed. Simulations with this modelling are shown to predict how the heat, electrically produced in the probe, is dissipated in the probe-sample system. In particular, it is shown that the steady-state of conduction losses to the thermal element support varies versus the thermal conductivity of the sample and can lead to bad interpretations of the measurement.     

Evaluation of small-scale combustion of an insensitive high explosive formulation containing 3-nitro-1,2,4-triazol-5-one (NTO), 2,4-dinitroanisole (DNAN), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX)

ABSTRACT

Energetic materials are often disposed by open-burning or open-detonation as it is a cost-effective and efficient means of destroying explosive material, and often minimizes the need to transport hazardous explosives to treatment facilities. This practice is often scrutinized for the negative environmental impact of the odorous and unsightly toxic gaseous emissions as well as the resulting deposition residues, which often contain unburned energetic materials. With the increasing use of Insensitive High Explosive compositions in munitions, it is essential that the potential environmental impact of their disposal is assessed before their extensive use to prevent the kind of contamination incidents experienced with legacy explosives. Therefore, the aim of this work was to develop a controlled laboratory experiment to identify the gaseous emissions and the energetic material residues that are generated through the combustion of the IHE components 3-nitro-1,2,4-triazol-5-one (NTO), 2,4-dinitroanisole (DNAN), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX). A sealed vial containing small (mg) quantities of energetic material was heated until the energetic material combusted. Gas chromatography/mass spectrometry (GCMS) was used to calculate the oxygen consumption and to identify the gases that were generated. The solid residues were analyzed by high-performance liquid chromatography (HPLC) to quantify unburned energetic material. Results showed that DNAN was the most resistant to burning, thus leaving significant quantities of unreacted starting material in the vial. An interesting observation for the IHE formulation was that DNAN also inhibited the combustion of NTO and RDX. The gases emitted during the open burning of IHE components and mixtures included CO, CO₂, and N₂O as expected, but the proportions differed when the components and mixture were compared, reflecting the influence of DNAN on the burning behavior. From our data, we concluded that open-burning DNAN-based formulations is an environmentally unfavorable waste-management practice for the disposal of IHEs mainly due to generation of solid residues as well as unburnt DNAN.     

Threaded ensembles of autoencoders for stream learning

Anomaly detection in streaming data is an important problem in numerous application domains. Most existing model‐based approaches to stream learning are based on decision trees due to their fast construction speed. This paper introduces streaming autoencoder (SA), a fast and novel anomaly detection algorithm based on ensembles of neural networks for evolving data streams. It is a one‐class learner, which only requires data from the positive class for training and is accurate even when anomalous training data are rare. It features an ensemble of threaded autoencoders with continuous learning capacity. Furthermore, the SA uses a 2‐step detection mechanism to ensure that real anomalies are detected with low false‐positive rates. The method is highly efficient because it processes data streams in parallel with multithreads and alternating buffers. Our analysis shows that SA has a linear runtime and requires constant memory space. Empirical comparisons to the state‐of‐the‐art methods on multiple benchmark data sets demonstrate that the proposed method detects anomalies efficiently with fewer false alarms.     

Effect of persulfate on the oxidation of benzotriazole and humic acid by e-beam irradiation

These days, the use of persulfate in advanced oxidation processes (AOPs) has gained more attention as an emerging clean and efficient technology to degrade the organic pollutants. The objective of this study was to investigate the effect of the addition of persulfate on the oxidation of benzotriazole (BT) and humic acids (HAs) by irradiation. The degradation of BT (3.7 μM) was followed under the influence of persulfate addition (200-500 μM) in combination with a fixed radiation dose (15 Gy) in the absence and presence of HA (5 and 20mg/L) in deionized water. The main results obtained in this study on the degradation of BT in the presence of HA showed a different effect of S(2)O(8)(2-) addition during irradiation, depending on whether HA are oxidized or not-oxidized. (1) An inhibitory effect of S(2)O(8)(2-) was observed in the presence of non-oxidized HA. (2) The removal of BT was generally more important during irradiation in the presence of S(2)O(8)(2-) when HA is pre-oxidized. This could be explained by the different structures of humic acids. These differences of structures of HA were identified by physico-chemical parameters such as the absorbance in the UV (254 nm), the fluorescence and the SUVA measurement.     

Effect of biological and chemical oxidation on the removal of estrogenic compounds (NP and BPA) from wastewater: an integrated assessment procedure

A major source of the wide presence of EDCs (Endocrine Disrupting Compounds) in water bodies is represented by direct/indirect discharge of sewage. Recent scientific literature reports data about their trace concentration in water, sediments and aquatic organisms, as well as removal efficiencies of different wastewater treatment schemes. Despite the availability of a huge amount of data, some doubts still persist due to the difficulty in evaluating synergistic effects of trace pollutants in complex matrices. In this paper, an integrated assessment procedure was used, based on chemical and biological analyses, in order to compare the performance of two full scale biological wastewater treatment plants (either equipped with conventional settling tanks or with an ultrafiltration membrane unit) and tertiary ozonation (pilot scale).Nonylphenol and bisphenol A were chosen as model EDCs, together with the parent compounds mono- and di-ethoxylated nonylphenol (quantified by means of GC-MS). Water estrogenic activity was evaluated by applying the human breast cancer MCF-7 based reporter gene assay. Process parameters (e.g., sludge age, temperature) and conventional pollutants (e.g., COD, suspended solids) were also measured during monitoring campaigns.Conventional activated sludge achieved satisfactory removal of both analytes and estrogenicity. A further reduction of biological activity was exerted by MBR (Membrane Biological Reactor) as well as ozonation; the latter contributed also to decrease EDC concentrations.     

A comparison of MOSFETs aging under d.c., a.c. and alternating stress conditions

The effects of static, alternating and dynamic stress conditions on the degradation rate of 0.8μm n- and p-channel LDD MOS transistors have systematically been investigated and compared. The shifts of the threshold voltage, transconductance, linear drain current and charge pumping current were used to monitor the transistor degradation. The results suggest that the aging induced by a dynamic stress cannot be directly explained with static stress models, essentially because it is highly dependent on a larger number of parameters (biases and durations of the top and bottom levels of the pulses, transient times). The correlation of static and dynamic stresses also clarifies the degradation mechanisms, in particular the role of hot holes in the generation of interface states.