Synthesis and characterization of 15% efficient CIGSSe solar cells from nanoparticle inks

We report a total‐area power conversion efficiency of 15% for a copper indium gallium disulfoselenide (CIGSSe) solar cell fabricated from a copper indium gallium disulfide (CIGS) nanoparticle ink based process. Careful optimization of the fabrication process has resulted in a significant improvement in efficiency compared to our previously reported efficiency of 12%. This efficiency ranks among the highest reported in the literature for solution processed CIGSSe. Despite having an absorber thickness of approximately 700–800 nm, which is less than half the thickness of high efficiency devices grown by both coevaporation and solution processes in the literature, our devices show good short‐circuit current (32.1 mA/cm²). Surprisingly, the sintered film shows lateral composition fluctuations, which have not been reported for other high efficiency devices and may be responsible for the lower open circuit voltage (636 mV) observed here. This suggests an avenue for further improvement through optimization of the nanoparticle selenization process to better control composition in the sintered film. Copyright © 2015 John Wiley & Sons, Ltd.     

Phase development and pore stability of yttria- and ytterbia-stabilized zirconia aerogels

High-porosity yttria- and ytterbia-stabilized zirconia aerogels offer the potential of extremely low thermal conductivity materials for high-temperature applications. Yttria- and ytterbia-doped zirconia aerogels were synthesized using a sol-gel approach over the dopant range of 0-20 atomic percent. Surface area, pore volume, and morphology of the as-dried aerogels and materials thermally exposed for short periods of time to temperatures up to 1200°C were characterized by nitrogen physisorption, scanning and transmission electron microscopy, and X-ray diffraction. The aerogels as supercritically dried all were X-ray amorphous. At a 5% dopant level, a tetragonal structure with a smaller monoclinic phase developed on thermal exposure. Mixed tetragonal and cubic phases or predominantly cubic materials were observed at higher dopant levels, depending on the dopant level, temperature and exposure time. The formation of crystalline phases was accompanied by loss of surface area and pore volume, although some mesoporous structure was maintained on short-term exposure to 1000°C. Incorporation of the smaller Yb atom into the lattice structure resulted in smaller lattice dimensions on crystallization than was seen with Y doping and favored a more highly equiaxed structure. Aerogels synthesized with 15% Y maintained the smallest particle size without evidence of sintering at 1100°C. Largest shrinkage and loss of pore volume occurred on crystallization from the amorphous phase, with further loss of pores at temperatures above 1000°C attributable to changes in lattice parameters.     

The Future IS Organization in a Flat World

ABSTRACT

The business world is becoming increasingly “flat” with regard to access to global markets and a global workforce. New operational priorities are emerging that require new IS capabilities. The linkage between these operational shifts and the changes required by an IS organization to develop new IS capabilities for a flattening world are identified and discussed.     

An information-processing model of the decision to seek professional help.

Despite the presence of quality mental health care in many communities, people tend to avoid seeking help and wind up languishing in their problems unnecessarily. For the professional to better understand how to reach these individuals, an information-processing model is presented that examines the effects of people's interpretation of their environment and their symptoms on their decision to seek mental health services. Using the model as a guide, suggestions are presented for practitioners who wish to provide services to those who are in need of professional help, yet are hesitant to obtain it. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Investigation of the N-substituent conformation governing potency and mu receptor subtype-selectivity in (+)-(3R, 4R)-dimethyl-4-(3-hydroxyphenyl)piperidine opioid antagonists

A study of the binding site requirements associated with the N-substituent of (+)-(3R,4R)-dimethyl-4-(3-hydroxyphenyl)piperidine (4) derivatives was undertaken using a set of rigid vs flexible N-substituents. The study showed that compounds 7-9 bearing the trans-cinnamyl N-substituent most closely reproduced the potency at the opioid receptor of the flexible N-propylphenyl or N-propylcyclohexyl analogues previously reported. Neither the N-substituted cis-cinnamyl nor the cis-phenylcyclopropylmethyl compounds 10 and 11, respectively, showed high affinity for the opioid receptor. However, the N-trans-phenylcyclopropylmethyl compound 12 closely approximated the affinity of compounds 7-9. Additionally, we found that free rotation of the phenyl ring is necessary for high affinity binding and mu receptor subtype selectivity as the planar N-substituted thianaphthylmethyl and benzofuranylmethyl compounds 13 and 14 had significantly lower binding affinities. Altogether, these findings suggest that the high binding affinity, selectivity, and antagonist potency of N-propylphenyl or N-propylcyclohexyl analogues of (+)-(3R, 4R)-dimethyl-4-(3-hydroxyphenyl)piperidine (4) are achieved via a conformation wherein the connecting chain of the N-substituents is extended away from piperidine nitrogen with the appended ring system rotated out-of-plane relative to the connecting chain atoms. This conformation is quite similar to that observed in the solid state for 5, as determined by single crystal X-ray analysis. Additionally, it was found that, unlike naltrexone, N-substituents bearing secondary carbons attached directly to the piperidine nitrogen of 4 suffer dramatic losses of potency vs analogues not substituted in this manner. Using a functional assay which measured stimulation or inhibition of [35S]GTP-gamma-S binding, we show that the trans-cinnamyl analogues of (+)-(3R, 4R)-dimethyl-4-(3-hydroxyphenyl)piperidine (4) retain opioid pure antagonist activity and possess picomolar antagonist potency at the mu receptor.     

Arrangement of subunits in 20 S particles consisting of NSF, SNAPs, and SNARE complexes

The present study attempts to identify the antigen-presenting cells in the retina, utilizing bone marrow-transplanted chimeric rats. Two types of chimeras were used: one produced by transplanting bone marrow cells from F1 hybrids of Lewis and Brown Norway (BN) into sublethally irradiated Brown Norway rats (LBN/F1-->BN), followed by adoptive transfer of S-antigen-specific T cells obtained from Lewis rats; the second produced by transplanting bone marrow cells from BN rats into sublethally irradiated F1 hybrids (BN-->LBN/F1), followed by adoptive transfer of S-antigen-specific T cells obtained from F1 hybrids. As controls, Lewis, F1 hybrids and BN rats also received adoptive transfer of syngeneic uveitogenic T cell lines. All animals were killed on the seventh day after adoptive transfer and their eyes and pineal glands were analysed immunohistochemically, utilizing antibody directed against Lewis specific MHC class II molecules(OX-3). The analyses revealed the development of uveoretinitis and pinealitis in both types of chimeras and in the Lewis and F1 hybrid rats. BN rats did not develop uveoretinitis. OX-3-positive cells were found in the retina and the pineal glands of both types of chimeras, and in the Lewis and F1 hybrid rats but not in the BN rats. These cells in the retina expressed dendritic morphology and perivascular distribution. Retinal pigment epithelia, Müller cells and the vascular endothelia of both chimeras, the two strains, and the F1 hybrid rats did not demonstrate OX-3-positive staining. These results suggest that the bone marrow-derived cells in the retina and pineal gland may present S-antigen to T cells, initiating the cascade of uveoretinitis and pinealitis.     

Calculation of performance of fire retardant ceiling systems

With equations, Part I describes the thermal behavior of a composite system consisting of a noncombustible ceiling board suspended below a concrete floor slab. Part II shows how the equations have been successfully adapted to digital computer operation. The computed results agree with experimental measurements for two specific systems exposed to a standard test furnace heated at a prescribed rate. Note: References 1 through 11, Table 1, and Figures 1 and 2 will be found in Part I of this paper published inFire Technology, Vol. 5, No. 4, November 1969, on pages 323–331.     

Program verification with interacting analysis plugins

In this paper we propose and argue for a modular framework for interprocedural program analysis, where multiple program analysis tools are combined in order to exploit the particular advantages of each. This allows for “plugging together” such tools as required by each verification task and makes it easy to integrate new analyses. Our framework automates the sharing of information between plugins using a first order logic with transitive closure, in a way inspired by the open product of Cortesi et al. We describe a prototype implementation of our framework, which performs static assertion checking on a simple language for heap-manipulating programs. This implementation includes plugins for three existing approaches—predicate abstraction, 3-valued shape analysis and a decidable pointer analysis—and for a simple type system. We demonstrate through a detailed example the increase in precision that our approach can provide. Finally we discuss the design decisions we have taken, in particular the tradeoffs involved in the choice of language by which the plugins communicate, and identify some future directions for our work. R. Lazic, R. Nagarajan and J. C. P. Woodcock