Toward customer-usable all-optical networks

Although all-optical networks were being thought about almost ten years ago, until recently it would have been premature to talk about such networks as being truly usable. Now, ways of removing most of the roadblocks to practicality have come clearly into view. It is generally agreed that time-division packet switching in the form of asynchronous transfer mode (ATM) is likely to constitute the next generation of networking, both local and wide area; but what about the generation after that? While people are evolving SONET/ATM, the present Internet, and such emerging ambitions as the National Information Infrastructure (NII), in order to serve the needs anticipated for the next decade, optical fiber is being steadily installed at a rate of 700 miles per day in the United States alone. Furthermore, this resource is being extended steadily outward from the telco or cable provider backbone into customer premises, so that within the lifetime of the ATM generation, we may expect extremely rich fiber connectivity of a large number of homes and offices     

A neural network control system with parallel adaptive enhancementsapplicable to nonlinear servomechanisms

In this paper, we present a technique for using an additional parallel neural network to provide adaptive enhancements to a basic fixed neural network-based nonlinear control system. This proposed parallel adaptive neural network control system is applicable to nonlinear dynamical systems of the type commonly encountered in many practical position control servomechanisms. Properties of the controller are discussed, and it is shown that if Gaussian radial basis function networks are used for the additional parallel neural network, uniformly stable adaptation is assured and the approximation error converges to zero asymptotically. In the paper, the effectiveness of the proposed parallel adaptive neural network control system is demonstrated in real-time implementation experiments for position control in a servomechanism with asymmetrical loading and changes in the load     

Efficacy and Safety Evaluation of Ozonation to Degrade Aflatoxin in Corn

ABSTRACT: This study determined the efficacy and safety of ozonation in degrading aflatoxin in corn. Ozonation (10 to 12 wt%) reduced aflatoxin levels by 92% and no reversion to the parent compound was observed. Ozonation had minimal effect on fatty acids of uncontaminated corn, but had significant effect on fatty acids of contaminated corn. Crude extracts showed no mutagenic potential in the Ames assay using TA98 and TA100. Clean-up using hexane increased their mutagenic potentials. Clean-up using Mycosep columns increased the mutagenic potentials 18 to 617%. Hexane extracts from ozone-treated contaminated corn had lower inhibitory effect. This suggested that a fat-soluble mutagen is being formed or natural inhibitors of mutagenicity are being destroyed.     

Tabletability of Maltodextrins and Acetaminophen Mixtures

Tabletability of five types of maltodextrin, a filler/binder excipient, was studied by testing their loading potentials with acetaminophen. The formulations consisted of excipient and acetaminophen at five different ratios and magnesium stearate at a 0.5% concentration. These mixtures were compacted employing an Integrated Compaction Research System at a constant punch velocity of 100 mm/sec. under varying applied pressures from 50 to 450 MPa. Compaction data were evaluated using the total work of compaction vs applied pressure plots whilst the post-compaction tests included the measurements of crushing force, disintegration time, and friability of the resulting tablets. Both the energy involved during the compaction of a formulation and the crushing force values of the resulting tablets decreased as the amount of the maltodextrin in a formulation was reduced. Maltodextrins exhibited adequate binding potential at acetaminophen drug loading levels of only up to twenty-five percent. The disintegration times of the tablets containing maltodextrins were generally prolonged and this was found to be due to the formation of a “gel” layer around the tablet which formed on immersion into water. The tabletability of maltodextrins were also compared to that of Fast-Flo lactose, and the compactability of these excipients were found to be similar.     

Evolution of flat-panel displays

The evolution in performance and manufacturability of liquid-crystal displays has created a new reality in the electronic information displays industry. LCD's now outnumber all other flat-panel displays in production volume, by more than two orders of magnitude. LCD's may equal CRT's in market sales by the year 2000. However, LCD's are still an order of magnitude more expensive than comparable performing CRT's. LCD's are enabling new products, such as personal digital assistants, moving map navigators, picture telephones, etc., which could not he readily done with CRTs because of their size and sensitivity to ambient illuminations. The LCD technology in various modes, from passive twisted nematic to active matrix, is being used in all product sizes, from the 0.7-in camcorder viewfinder to the 14-in full-color display with XGA resolution. Full color is very important in future products and any flat-panel display technology without it will be relegated to niche markets     

FDTD simulation of microwave sintering of ceramics in multimodecavities

Microwave sintering of ceramics in multimode cavities, particularly the use of picket-fence arrangements, has recently received considerable attention. Various types of ceramics have been successfully sintered and, in some cases, a desirable and unique “microwave effect” has been observed. At present, various aspects of the sintering profess such as preparation of sample sizes and shapes, types of insulations, and the desirability of including a process stimulus such as SiC rods are considered forms of art and highly dependent on human expertise. The simulation of realistic sintering experiments in a multimode cavity may provide an improved understanding of critical parameters involved and allow for the development of guidelines towards the optimization of the sintering process. In this paper, we utilize the FDTD technique to model various geometrical arrangements and material compatibility aspects in multimode microwave cavities and to simulate realistic sintering experiments. The FDTD procedure starts with the simulation of a field distribution in multimode microwave cavities that resembles a set of measured data using liquid crystal sheets. Also included in the simulation is the waveguide feed as well as a ceramic loading plate placed at the base of the cavity     

Describing collaborative forms: a profile of the team-writingprocess

The paper examines collaborative writing practices students in the Air Force Institute of Technology's Graduate School of Logistics and Acquisition Management use to produce team-authored theses. In analyzing how student writing teams plan, execute, and assess writing activities, the researchers identify and describe some of the forms that collaboration takes, thereby successfully connecting their work within a broader research continuum concerning collaborative writing, particularly when applied in academic settings     

Design and development of a multichannel potentiometer for monitoring an electrode array and its application in flow analysis

A versatile potentiometer that works with electrode arrays in flow injection and/or monosegmented flow systems is described. The potentiometer is controlled by a microcomputer that allows individual, sequential multiplexed or random accesses to eight electrodes while employing only one reference electrode. The instrument was demonstrated by monitoring an array of seven flow-through ion-selective electrodes for Ag(+) and for three electrodes for Cl(-), Ca(2+) and K(+). The figures of merit of the individual and multiplexed (summed) readings of the electrode array were compared. The absolute standard deviation of the measurements made by summing the potential of two or more electrodes was maintained constant, thus improving the precision of the measurements. This result shows that an attempt to combine the signals of the electrodes to produce a more intense signal in the Hadamard strategy is feasible and accompanied by a proportional improvement in the precision of individual measurements. The preliminary tests suggest that the system can allow for 270 determinations per hour, with a linear range from 1.0 x 10(-2) to 1.0 x 10(-4) mol l(-1) for the three di inverted exclamation markerent analytes. Detection limits were estimated as 3.1 x 10(-5), 3.0 x 10(-6) and 1.0 x 10(-5) mol l(-1) for Cl(-), Ca(2+) and K(+), respectively.     

A frequency domain ultrasonic model for the pulse-echo transducer response of an arbitrary scatterer in a fluid

A very general model formulation is presented in the frequency domain for the pulse-echo ultrasonic response of an arbitrary scatterer in a fluid. The transducer is modeled as a piston source and the scatterer can be located anywhere in the transducer wavefield. The model is computationally efficient and is shown to agree well with initial experiments.     

Adhesion improvement of thermoplastic isotropically conductive adhesive

Generally, isotropically conductive adhesive formulations include epoxy resin as the polymeric matrix. Although epoxy has superior adhesion capability, its drawbacks include the tendency to absorb moisture and lack of reworkability (thermosetting polymer). In this study, a thermoplastic polymer with low moisture absorption (0.28 wt%), called polyarylene ether (PAE2), is used in isotropically conductive adhesive (ICA) formulation. Previous research work by Lu et al. showed that the moisture absorbed into epoxy caused galvanic corrosion, which result in the formation of metal oxide . By using a polymer with low moisture absorption, the amount of water present in ICA will be small, and the corrosion rate and formation of metal oxide can be reduced. However, previous measurements of contact resistance stability of PAE2-based ICA showed that they are not stable on all surface finishes. It was determined that for thermoplastic-based ICA, poor adhesion was the main mechanism for unstable contact resistance. Two methods of adhesion improvement will be evaluated in this work. The first is to use coupling agents and the second is to blend the thermoplastic with epoxy. Both methods showed promise in improving the contact resistance stability of polyarylene ether based ICA.