STRUCTURAL CHARACTERIZATION OF ARABIAN HEAVY CRUDE OIL RESIDUE

The residue (370°C+) from Arabian Heavy Crude Oil was separated into four fractions, asphaltenes, resins, aromatcis and saturates. The four fractions were found to be free of artifacts and analytically significant in themselves. Each fraction was further characterized by elemental analysis, infrared spectroscopy, n.m.r. spectroscopy and mass spectroscopy. The aromatics are the major constituent of the residue and the ratio of asphaltenes, resins, aromatics and saturates is about 2:3:8:3. The strucutral characterization study led to the conclusion that asphaltene fraction is maximum hydrogen deficient followed by resins, aromatics and saturates thus suggesting larger degree of ring condensation in the structure of asphaltenes than resins and aromatics.     

Response of Different Genotypes of Faba Bean Plant to Drought Stress

Drought stress is one of the major abiotic stresses that are a threat to crop production worldwide. Drought stress impairs the plants growth and yield. Therefore, the aim of the present experiment was to select the tolerant genotype/s on the basis of moprpho-physiological and biochemical characteristics of 10 Vicia faba genotypes (Zafar 1, Zafar 2, Shebam, Makamora, Espan, Giza Blanka, Giza 3, C4, C5 and G853) under drought stress. We studied the effect of different levels of drought stress i.e., (i) normal irrigation (ii) mild stress (iii) moderate stress, and (iv) severe stress on plant height (PH) plant⁻¹, fresh weight (FW) and dry weight (DW) plant⁻¹, area leaf⁻¹, leaf relative water content (RWC), proline (Pro) content, total chlorophyll (Total Chl) content, electrolyte leakage (EL), malondialdehyde (MDA), hydrogen peroxide (H₂O₂) content, and activities of catalase (CAT), peroxidase (POD) and superoxide dismutase (SOD) of genotypes of faba bean. Drought stress reduced all growth parameters and Total Chl content of all genotypes. However, the deteriorating effect of drought stress on the growth performance of genotypes “C5” and “Zafar 1” were relatively low due to its better antioxidant enzymes activities (CAT, POD and SOD), and accumulation of Pro and Total Chl, and leaf RWC. In the study, genotype “C5” and “Zafar 1” were found to be relatively tolerant to drought stress and genotypes “G853” and “C4” were sensitive to drought stress.     

A comparative study using direct hydrothermal and indirect fusion methods to produce zeolites from coal fly ash utilizing single-mode microwave energy

This paper investigates the effects of microwave irradiation on the synthesis of zeolite Na-A from coal fly ash at atmospheric pressure. Microwave irradiation has shown to accelerate zeolitization from several hours to several minutes. A single-mode laboratory-scale microwave was employed, which enabled control of irradiated power and temperature of the reaction mixture, while the pressure was controlled by affixing a condenser on the 40 mL Teflon reactor vessel with a working volume 20 mL. Design of Experiment was used to compare two methods of converting CFA to zeolite-A, direct hydrothermal method and indirect fusion method. Experiments conducted were two level four factorial designs. The first factor considered was the categorical factor of conversion method (hydrothermal vs fusion), while the other three factors investigated were power (P), time (θ), and aluminate concentration (δ). Zeolite produced from CFA (CFAZA) was characterized using XRD, FTIR, SEM, TGA, BET, and cation exchange capacity. It was observed that the crystallinity of the product was influenced by factors such as, conversion method, power, time, and aluminate concentration. The hydrothermal and fusion products were comparable to each other in their characteristics, however, hydrothermal CFAZA performed better at immobilizing heavy metal ions and showed better crystalline structure, whereas fusion CFAZA had a higher BET surface area and a slightly higher CEC. Regardless of the performance of the categorical factors the other factors, i.e., power, time, and aluminate concentration followed the same trend for both types of CFAZA.     

Cardiac Arrival Time Analyzer

The sequence of excitation of cardiac muscles is greatly affected by any abnormality in the conduction system of the heart. Epicardial mapping for the measurement of activation time at different points is helpful for the diagnosis of such abnormalities. For the measurement of activation time at different points of the epicardial surface, a number of sophisticated instruments, including microcomputer-based ones, have been reported. However, the need for a reliable, low-cost, and easy to operate instrument cannot be denied. In this note, such a cardiac arrival time analyzer is described.     

Silicon Mitigates Drought Stress in Wheat (Triticum aestivum L.) Through Improving Photosynthetic Pigments,Biochemical and Yield Characters

Silicon - Feeling prone to stress differs with plant production stage, water scarcity near commencement of grain filling phase has a significant reduced grain yield through fewer endosperm and sink...     

NS-2 based simulation framework for cognitive radio sensor networks

In this paper, we propose a simulation model for cognitive radio sensor networks (CRSNs) which is an attempt to combine the useful properties of wireless sensor networks and cognitive radio networks. The existing simulation models for cognitive radios cannot be extended for this purpose as they do not consider the strict energy constraint in wireless sensor networks. Our proposed model considers the limited energy available for wireless sensor nodes that constrain the spectrum sensing process—an unavoidable operation in cognitive radios. Our model has been thoroughly tested by performing experiments in different scenarios of CRSNs. The results generated by the model have been found accurate which can be considered for realization of CRSNs.     

Novel Cost Efficient Resource Allocation Technique Based on Deadline and Budget Constraints for Edge Users

Wireless Personal Communications - The edge computing paradigm has experienced quick development in recent years. This paradigm is featured by pushing the storage and computational resources closer...     

The membrane properties of alumina-coated alumina support layers and alumina-coated diatomite–kaolin composite support layers

ABSTRACT

Porous ceramic membranes are a current research focus because of their outstanding thermal and chemical stability. Recent research has utilised inexpensive natural materials such as diatomite to reduce the expense of these porous ceramic membranes. However, insufficient data exist for microfiltration applications using the diatomite-based membranes. The measured membrane properties of alumina-coated alumina support layers and alumina-coated diatomite–kaolin composite support layers have been compared. These experiments have been used to determine whether the average pore size could be reduced effectively by controlling the thickness of the alumina coating layer, while maintaining acceptable water permeability. The membrane properties of the alumina-coated alumina support layers and the alumina-coated diatomite–kaolin composite support layers were examined using the scanning electron microscopy, mercury porosimetry, and a dead-end microfiltration system.     

Failure Analysis of HAZ Cracking in Low C–CrMoV Steel Weldment

This case study describes the failure analysis of steel nozzle in which cracking was observed after a circumferential welding process. The nozzle assembly was made from low C–CrMoV alloy steel that was subsequently single pass butt welded using gas tungsten arc welding. No cracks were found in visual inspection of the welds; however, X-ray radiography showed small discontinuous cracks on the surface in the area adjacent to weld bead, i.e. heat affected zone. The welding of nozzle parts made of same material was a routine process and this type of cracking did not occur in the past. Therefore, it became essential to determine the root cause of the failure. A detailed investigation including visual examination, non-destructive testing, optical microscopy, microhardness measurements and residual stress measurements were carried out to find out the primary cause of failure and to identify actions required to avoid its reoccurrence in future. Results of the investigation revealed that the principal cause of failure was the presence of coarse untempered martensite in the heat affected zone due to localized heating. The localized heating was caused by high welding heat input or low welding speed and resulted in the high transformation stresses. These transformation stresses combined with the thermal stresses and the constraint conditions to cause intergranular brittle fracture.     

Adhatoda vasica in Conjunction with Binary Combinations of Metal Salts and Biomordants as an Effective Textile Dye to Produce novel Shades on Wool

This study was undertaken to propose an alternative use of Adhatoda vasica leaves extract as a potential source of natural dye for the coloration of woolen yarn/fibers. Premordanting technique was adopted with double metal salt combinations of ferrous sulfate, stannous chloride, and potassium aluminum sulfate and double biomordant combinations of gallnut, pomegranate, and babool, to achieve dyed textile materials of acceptable colorimetric and fastness properties. Sixty-three sober and elegant shades were developed on wool by varying the nature and the concentration of mordants involved in the combinations. The hue of color developed was found to be in yellow-red coordinate of color space diagram. All the dyed samples presented excellent color strength (K/S) values and highest values were found in case of gallnut + pomegranate peel extract (PPE) combination. Biomordants produced altogether different behavior in comparison to metal mordants in the development of ecofriendly shades of different hue and tune. Majority of the dyed samples showed excellent fastness properties with respect to light, washing, and rubbing which confirmed the possibility of using A. vasica leaves extract as an effective yellow natural dye.