Planning Belgian Congo’s network of medical infrastructure: type-plans as tools to construct a medical model-colony, 1949–1959

ABSTRACT

Throughout the 1950s, the Belgian colonial government constructed a vast network of hospital infrastructure as part of its Ten-Year Plan, a colony-wide socio-economic scheme emblematic for the era of ‘welfare colonialism.’ This network played a key role in Belgian colonialism, by providing healthcare, but also by boosting labour productivity, facilitating state presence and control, and by advertising Congo as a medical model-colony. In this article, we unpack the extensive administrative apparatus that was necessary to buttress this ambitious building programme, and we highlight type-plans as crucial government tools to construct such a vast network of healthcare infrastructure. At first glance, the use of type-plans confirms classic characterizations of the Belgian colonial government as an omnipotent and technocratic state apparatus that implemented large, top-down government plans through authoritative methods, often discarding local realities. However, tracing hospital construction on the ground reveals that type-plans did not function as immutable models, but rather as modular blueprints that allowed local administrations to adapt hospitals to local needs and contingencies. As such, our article illustrates how, facilitated by surprisingly flexible type-plans, everyday colonial policymaking in Belgian Congo was, contrary to the still dominant discourse, deeply reliant on the agency and aptitude of local officials.     

水泥混凝土路面固化翘曲试验研究

在水泥混凝土路面硬化过程中,由于各种因素引起的固化翘曲将长期存在,会对其平整度、耐久性产生重要影响.通过野外铺筑水泥混凝土足尺试验路面,观测、分析了5种养生方式下其早期、终凝时的温度场.结果表明：普通养护剂养生和塑料薄膜养生分别使水泥混凝土路面产生了7.1,6.5℃/26cm的内嵌温度梯度;虽然不同养生方式下水泥混凝土路面早期温度场变化规律基本相同,但差异也较为明显,而且这种差异主要由养生材料的太阳辐射吸收率、热交换系数等参数不同所致.     

铁路无砟轨道水泥乳化沥青砂浆吸振与隔振特性

采用加速度计测定了冲击荷载作用下普通混凝土与水泥乳化沥青砂浆（CA砂浆）试件以及试件下部钢板的振动加速度随时间的变化,并用落锤法对比了普通混凝土与CA砂浆的抗冲击破坏特性.研究表明：普通混凝土受到冲击后,其振动加速度随时间衰减不明显,且振动时间较长,其下部钢板也有类似规律;CA砂浆受到冲击后,其振动加速度表现为3个明显的衰减阶段,振动时间也要短于普通混凝土,同样CA砂浆下部钢板也有类似规律;与普通混凝土相比,CA砂浆表现出较好的吸振与隔振功能.抗冲击破坏的结果表明,CA砂浆的抗冲击性能优于普通混凝土.     

An artificial neural network model for the prediction of critical submergence for intake in a stratified fluid medium

Density differences may occur because of temperature differentials, suspended sediments, dissolved salts or other chemicals. Most of the large surface reservoirs are stably stratified throughout most, or all, of the year. One of the means of assisting the management is to allow a selective withdrawal from the reservoir. And while an intake is used for withdrawal (from the lower layer), a maximum discharge is required not allowing the uptake of the upper layer fluids. The value of the intake's vertical distance from the upper layer elevation (submergence) when the upper layer fluids begin to be drawn into the intake is known as ‘critical submergence’. In this study, the critical submergence for a circular intake pipe in a stratified body (which has different layer thickness) is investigated. Experiments were conducted on a vertically flowing downward intake pipe in a still-water reservoir. Artificial neural network (ANN) models and formulas, which are found by the theoretical analysis of critical spherical sink surface (CSSS), are used for the analysis of experimental results. The CSSS has the same centre and discharge as the intake. The ANN model and CSSS results are compared with the experimental results.     

On education

The following observations are intended only to outline some concerns about, and to offer observations on, the teaching of design disciplines in the University of Buenos Aires and to rehearse the current educational challenges relating to achieving the standards expected of a professional graduate competent to improve our environmental demands.     

Revised stratigraphy of the Tertiary deposits of Istanbul and their engineering properties

For over 50 years, the Upper Oligocene–Upper Miocene sedimentary sequence in Istanbul has been considered to be formed of two distinct sequences separated by an unconformity. However, recent field observations and an analysis of numerous borehole data indicate the Gürp?nar, Çukurçe?me and Güngören Formations are in fact a single sequence of alternating clay–sand/sandstone beds/lenses, here named the Avc?lar Formation. The Bak?rköy Formation, which is typically composed of carbonate rocks, conformably overlies the Avc?lar Formation. The paper provides the geotechnical parameters of the units within the Avc?lar Formation which it is hoped will facilitate selecting suitable geotechnical and engineering geological parameters to represent the deposits and minimize errors in the interpretation/evaluation of in-situ conditions.     

Long-term microleakage trends in access cavities conditioned with phosphoric acid and deproteinizing agent for root-canal-treated teeth: an investigation of fluid filtration and microscopy analysis

This study evaluated the long-term microleakage of access cavities conditioned with phosphoric acid and deproteinizing agents for root-canal-treated teeth using fluid filtration and microscopical analysis. Occlusal surfaces of extracted human mandibular premolars (N = 90) were removed leaving a 4 mm coronal length from the cemento-enamel junction. After root canal treatment, the specimens were randomly divided into four experimental groups (n = 21) and the remaining teeth were used for positive control group (n = 6): SB: 35% H₃PO₄ + Adper Single Bond 2; SSB: 35% H₃PO₄ + 5.25% NaOCl + 10% Sodium ascorbate (C₆H₇NaO₆) + Adper Single Bond 2; XP: 35% H₃PO₄₊XP Bond; SXP: 35% H₃PO₄₊5.25% NaOCl + 10% Sodium ascorbate + XP Bond. All cavities were restored with a resin composite (Filtek Z250). After removing the root filling from the apical side, teeth were subjected to fluid filtration test for 1 week, 6 and 12 months followed by ×2500 thermocycling after 1st week and 6th months each. Data were analyzed using one-way ANOVA and Dunnet T3 tests (α = 0.05). SEM analyses were carried out after each microleakage evaluation in two random teeth from all groups. Microleakage values in groups SB and XP presented no significant difference in any of the evaluated period (p > 0.05). Microleakage results of SXP (0.01665) group showed significant difference compared to XP (0.03377) and SB (0.03049) groups after 12 months. SSB group (0.00901) showed significantly less microleakage among all other groups (0.01665–0.03377) (p < 0.05). Prior to endodontic treatment, in access cavities, acid etching with 35% H₃PO₄ followed by the application of NaOCl and sodium ascorbate completely destroyed the collagen layer, reducing the microleakage and resin–dentin interface degradation up to 12 months.     

Effect of desensitizers on the microleakage of previously restored Class V resin composite restorations

Objectives: The aim of this in vitro study was to evaluate the effect of different desensitizers’ application on the microleakage of previously restored Class V composite resin restorations.

Materials and methods: Class V cavities were prepared on the buccal surfaces of 40 extracted human third molars. Forty box-shaped cavities were divided into four groups, based on the desensitizers used (n = 10). All teeth were restored with the same bonding agent and composite material. No desensitizer was applied in the control group. In the experimental groups, BisBlock, Gluma and Universal bonding agents were the desensitizers. The desensitizers were applied after completion of composite restorations according to manufacturers’ instructions. All specimens were then thermocycled at 5–55 °C, with a 10-s dwell time for 500 cycles. The samples were then immersed in 0.5% methylene blue dye for 24 h, sectioned into two equal halves, evaluated for microleakage using a stereomicroscope at 30× magnification and scored on a scale of 0–3. The data were analysed using the Kruskal–Wallis test at the significance level p < 0.05.

Results: There were no significant differences in microleakage after desensitizer application (p > 0.05). However, based on the obtained numerical values in our study, while the BisBlock and bonding groups showed lower microleakage at the occlusal margin, BisBlock, Gluma and bonding group showed lower microleakage at the gingival margin compared to the control group.

Conclusions: The application of desensitizers as a post-treatment option could be considered an advisable procedure to minimize microleakage.     

Comparison of the mechanical and biological properties of self-adhering materials

Purpose: The purpose of the present study was to compare the Vickers hardness numbers (VHNs), roughness numbers (RNs) and biological compatibility of glass carbomer (Glass Fill), resin-modified glass ionomer (Fuji II LC) and self-adhering flowable composite (Vertise Flow) materials. Materials and methods: Disc-shaped specimens of test materials (n = 15/group) were prepared, and VHNs and RNs were determined after 24 h. A direct contact test was used for cytotoxicity evaluation. Cell viability was measured for 24 h post-exposition with a photometric test (MTT assay; n = 16). Data were analysed using one-way analysis of variance with a post hoc Tukey’s test, the Kruskal–Wallis test and the Mann–Whitney U-test (p < 0.05). Results: Fuji II LC had the highest VHN. The VHN of Fuji II LC differed significantly from those of the other materials (p < 0.05). The RNs of Fuji II and Glass Fill were higher than that of Vertise Flow (p < 0.05). The self-adhering materials were not significantly cytotoxic compared with the control group (p > 0.05). Conclusions: The materials tested in this study showed a similar lack of cytotoxicity. The VHN of Fuji II LC was the highest, and the RN of Vertise Flow was the lowest.     

Au/TS‐1 catalyst for propene epoxidation with H2/O2: A novel strategy to enhance stability by tuning charging sequence

For propene epoxidation with H₂ and O₂, the catalytic performance of Au/TS‐1 catalyst is extremely sensitive to preparation parameters of deposition‐precipitation (DP) method. In this work, effect of charging sequence in DP process on catalyst structure and catalytic performance of Au/TS‐1 catalyst is first investigated. For different charging sequences, the compositions of Au complexes (e.g., [AuCl(OH)₃]^?) and pore property of TS‐1 (i.e., with or without H₂O prefilling micropores) could affect the transfer of Au complexes into the micropores, resulting in different Au locations and thus significantly different catalytic performance. Notably, when TS‐1 is first filled with H₂O and then mixed with Au complexes, the reduced Au/TS‐1 catalyst could expose Au nanoparticles on the external surface of TS‐1 and show high stability. The results provide direct evidence showing that micropore blocking is the deactivation mechanism. Based on the results, a simple strategy to design highly stable Au/Ti‐based catalysts is developed. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3963–3972, 2016