Numerical simulation of aerosol collection in filters with staggered parallel rectangular fibres

 In this paper, filters with rectangular fibres arranged in a staggered and parallel array and placed transverse to the flow are studied numerically. A two- dimensional flow field is obtained by solving Navier–Stokes equations with the control volume method. Periodic boundary conditions are introduced in the calculation. In order to achieve higher accuracy, a second-order upwind scheme is adopted and a fine mesh is arranged near the fibre and the symmetrical plane of the flow field where large gradients in velocity are expected. Particle trajectories are calculated by solving the corresponding Lagrangian equation of motion to obtain the collection efficiency of a single rectangular fibre, in which positions of the approaching particles on the inlet plane of the flow field are randomly distributed according to the Monte-Carlo principle. The simulation considers all the important mechanisms of particle capture including interception, inertial impaction and Brownian motion. Effects of fibre aspect ratio, filter packing density, particulate size and Reynolds number on the collection efficiency are numerically determined. The volumetric packing density ranges from 0.4 to 4% and the particle diameter is from 0.01 μm to 2 μm. Reynolds number based on the height of computational domain varies from 20 to 100 and the aspect ratio is from 0.1 to 10. Simulations with and without Brownian motion are carried out for different Reynolds numbers, packing densities and aspect ratios and the results show that Brownian effects are significant for particles smaller than 1 μm. Received 25 May 2001     

A circular crossed-field amplifier for in situ measurements, studyof reentrant beam effects, and comparison with numerical simulation

A low frequency, injected beam, circular format crossed-field amplifier has been designed and constructed for the purpose of studying electron-radio frequency wave interaction in reentrant devices. The device has been designed to allow in situ diagnostic probe measurements in the space between the anode and sole. The device has been operated in nonreentrant, fully reentrant, and reentrancy controlled configurations. Details of the design and operating parameters are described. Device characteristics are examined with respect to the amount of circulating charge or degree of reentrancy. A large increase in gain has been achieved from nonreentrant to the fully reentrant format. A gain of 7.2 dB has been obtained for the latter whereas only 3.8 dB has been obtained for the former with 30 mA of injected beam current. A maximum gain of 14.4 dB has been achieved for the fully reentrant configuration. Electron beam and noise measurements versus the degree of reentrancy have also been examined. Results from the nonreentrant amplifier performance have been directly compared with the MASK simulation code and good agreement has been obtained. These experiments will provide the basis for more detailed investigations on the effect of reentrancy on CFA operation and will also allow for the development of more accurate computer models of the reentrant system for numerical simulation of CFA operation     

The relationship between preparation convergence and retention of extracoronal retainers

PURPOSE: Although traditional ideal convergence (the sum of taper of the opposite sides) for crown preparation has been arbitrarily set at 4 degrees to 10 degrees, some believe absolute parallelism yields the highest retention. This study examined the relationship between the degree of convergence of a machined metal die and the retention of its casting. MATERIALS AND METHODS: The method used was that of cementing cast metal crowns onto full crown preparations on brass dies with varying convergence angles, and then recording the force required to remove the crowns from the dies in a vertical direction using a Tate-Emery Testing Machine and Load Indicator. RESULTS: It was found that retention (i.e., the force needed to remove the cemented castings from the die in their common long axis) increases from 0 degree convergence to peak between 6 degrees to 12 degrees convergence. It also seems that a critical film thickness does exist for optimum retention, and that film thicknesses smaller than the critical thickness may be responsible for the phenomenon that we have observed and directly related to the convergence angle itself. CONCLUSIONS: There seems to be experimental data supporting the use of traditionally taught convergence. Our study found that convergence angles between 6 degrees and 12 degrees seem to be optimum for tooth crown preparation when one plans to use zinc phosphate cement. Convergence angles of less than 6 degrees may not be desirable even if they can be clinically achieved. The results of our study indicate that a relationship exists between the convergence angle and the critical cement thickness that is necessary to realize the maximum strength properties of zinc phosphate cement.     

Low RF noise and power loss for ion-implanted Si having an improved implantation process

Very-low-transmission line noise of <0.25 dB at 18 GHz and low power loss /spl les/0.6 dB at 110 GHz have been measured on transmission lines fabricated on proton-implanted Si. In contrast, a standard Si substrate gave much higher noise of 2.5 dB and worse power loss of 5 dB. The good RF integrity of proton-implanted Si results from the high isolation impedance to ground, as analyzed by an equivalent circuit model. The proton implantation is also done after forming the transmission lines at a reduced implantation energy of /spl sim/4 MeV. This enables easier process integration into current VLSI technology.     

New design and realization techniques for a class of perfect reconstruction two-channel FIR filterbanks and wavelets bases

This paper proposes two new methods for designing a class of two-channel perfect reconstruction (PR) finite impulse response (FIR) filterbanks (FBs) and wavelets with K-regularity of high order and studies its multiplier-less implementation. It is based on the two-channel structural PR FB proposed by Phoong et al (1995). The basic principle is to represent the K-regularity condition as a set of linear equality constraints in the design variables so that the least square and minimax design problems can be solved, respectively, as a quadratic programming problem with linear equality constraints (QPLC) and a semidefinite programming (SDP) problem. We also demonstrate that it is always possible to realize such FBs with sum-of-powers-of-two (SOPOT) coefficients while preserving the regularity constraints using Bernstein polynomials. However, this implementation usually requires long coefficient wordlength and another direct-form implementation, which can realize multiplier-less wavelets with K-regularity condition up to fifth order, is proposed. Several design examples are given to demonstrate the effectiveness of the proposed methods.     

Key management approaches to offer data confidentiality for secure multicast

Multicasting is an efficient way to deliver data to a large group of users in applications such as Internet stock quotes, audio and music delivery, file and video distribution, etc. Many of these applications require the security feature of data confidentiality, which is not readily offered by the "open" nature of multicast. In order to offer such confidentiality, the encryption and decryption keys must be constantly changed upon a membership change. In this article, after discussing some performance criteria to offer secure multicast, we present a number of the proposed key management schemes for data confidentiality. We categorize these schemes into four groups: key tree-based approaches, contributory key agreement schemes supported by the Diffie-Hellman algorithm, computational number theoretic approaches, and secure multicast framework approaches. Through examples, we describe the operation of the schemes and compare their performances.     

Semiautomatic implementation of protocols using an Estelle-Ccompiler

The basic ideas underlying an Estelle-C compiler, which accepts an Estelle protocol specification and produces a protocol implementation in C, are presented. The implementation of the ISO (International Organization for Standardization) class-2 transparent protocol, using the semiautomatic approach, is discussed. A manual implementation of the protocol is performed and compared to the semiautomatic implementation. The semiautomatic approach to protocol implementation offers several advantages over the conventional manual one, including correctness and modularity in protocol implementation code, conformance to the specification, and reduction in implementation time. Finally, ongoing development of a new Estelle-C compiler is presented     

柱体自由扭转时的最优横截面形式

当柱体自由扭转时，柱体的抗扭性能与横截面形式有关，针对单连通域下的具有最优抗扭性能的横截面形式问题，本文建立了相应的最优形式控制模型，并通过变分法求解得到：在横截面面积相等的情况下，圆截面是所有截面中使结构整体应变能最小和扭转刚度最大的截面形式，这与圣维南所给的一般性结论是一致的。