Global survey and statistics of radio-frequency interference in AMSR-E land observations

Radio-frequency interference (RFI) is an increasingly serious problem for passive and active microwave sensing of the Earth. To satisfy their measurement objectives, many spaceborne passive sensors must operate in unprotected bands, and future sensors may also need to operate in unprotected bands. Data from these sensors are likely to be increasingly contaminated by RFI as the spectrum becomes more crowded. In a previous paper we reported on a preliminary investigation of RFI observed over the United States in the 6.9-GHz channels of the Advanced Microwave Scanning Radiometer (AMSR-E) on the Earth Observing System Aqua satellite. Here, we extend the analysis to an investigation of RFI in the 6.9- and 10.7-GHz AMSR-E channels over the global land domain and for a one-year observation period. The spatial and temporal characteristics of the RFI are examined by the use of spectral indices. The observed RFI at 6.9 GHz is most densely concentrated in the United States, Japan, and the Middle East, and is sparser in Europe, while at 10.7 GHz the RFI is concentrated mostly in England, Italy, and Japan. Classification of RFI using means and standard deviations of the spectral indices is effective in identifying strong RFI. In many cases, however, it is difficult, using these indices, to distinguish weak RFI from natural geophysical variability. Geophysical retrievals using RFI-filtered data may therefore contain residual errors due to weak RFI. More robust radiometer designs and continued efforts to protect spectrum allocations will be needed in future to ensure the viability of spaceborne passive microwave sensing.     

Analysis of Asynchronous Band-Limited DS-CDMA with MMSE Multiuser Detector over Generalized-<Emphasis Type="Italic">k</Emphasis> Fading Channels

In this paper, we investigate bit-error-rate (BER) performance of a minimum mean-squared error (MMSE) multiuser receiver for asynchronous band-limited direct- sequence code-division multiple-access (DS-CDMA) systems. We focus on the BER performance in the presence of multitone jamming (MTJ) over frequency-selective multipath fading channels. We consider the generalized-K fading model in our analysis, as it can model a large spectrum of fading-channel characteristics. We also analyze the effects of band- limited pulse shape on the BER performance of the system. Multipath diversity based on the maximal-ratio combining (MRC) scheme is employed to combat fading effects. Our analytical expressions are valid for arbitrary diversity levels and fading parameters. Spectrum raised cosine (SRC) and Beaulieu–Tan–Damen (BTD) pulse shapes are employed for numerical analysis. Numerical results show that in the presence of MTJ and under various channel conditions, the MMSE based receiver gives better BER performance than the one without it. Moreover, the system with BTD pulses outperforms the one with SRC pulses.     

AC-Boosting Frequency Compensation with Double Pole-Zero Cancellation for Multistage Amplifiers

In this paper, we present an AC-boosting compensation topology with double pole-zero cancellation (ACBC-DPZ) for a multistage amplifier driving a very large capacitive load. The proposed technique modifies the original AC-boosting compensation (ACBC) topology to increase the power-bandwidth efficiency and reduce the size for the output power transistor and compensation capacitor. Simulation results show that the ACBC-DPZ amplifier using a CSM 0.18 μm CMOS process can achieve a unity gain bandwidth of 14 MHz and an average slew rate of 3.88 V/μs at 1500 pF load. The amplifier dissipates 2.55 mW at a 1.8 V supply.     

Reservation arbitrated access for statistical multiplexing voicetraffic over dual-bus metropolitan area networks

Metropolitan area networks (MANs) are well suited to serve as broadband multiplexers for asynchronous transfer mode (ATM) networks, to facilitate enterprise networking and to support future wireless personal communication systems. We propose and analyze a novel reservation arbitrated (RA) access method which provides isochronous voice transport over dual-bus MANs while enabling statistical multiplexing among voice calls. In combination with a new cyclic capturing (CC) mechanism, RA access allows stations to capture and reserve isochronous voice channels in a fair and distributive manner. This paper presents the RA access protocol, derives an analytical model for general waste-free voice reservation protocols, and analyzes the performance of RA access by computer simulations validated by analytical calculations. To assess the actual voice quality, simulation results based on a real voice signal are also presented. Results indicate that RA access offers significant improvements in channel utilization, as compared to prearbitrated (PA) access, while providing an acceptable quality of service. Therefore, RA access offers an efficient voice transport mechanism for existing switched multimegabit data service (SMDS) networks employing the IEEE 802.6 protocol, as well as emerging ATM/MAN-based broadband networks     

Effect of nano Al2O3 additions on the microstructure, hardness and shear strength of eutectic Sn–9Zn solder on Au/Ni metallized Cu pads

Nano-sized, nonreacting, noncoarsening Al₂O₃ particles have been incorporated into eutectic Sn–Zn solder alloys to investigate the microstructure, hardness and shear strength on Au/Ni metallized Cu pads ball grid array substrate (BGA). In the plain Sn–Zn solder joint and solder joints containing Al₂O₃ nano-particles, a scallop-shaped AuZn₃ intermetallic compound layer was found at the interfaces. In the solder joints containing Al₂O₃ nano-particles, a fine acicular-shaped Zn-rich phase and Al₂O₃ nano-particles were found to be homogeneously distributed in the β-Sn matrix. The shear strengths and hardness of solder joints containing higher percentage of Al₂O₃ nano-particles exhibited consistently higher value than those of plain solder joint and solder joints containing lower percentage of Al₂O₃ nano-particles due to control the fine microstructure as well as homogeneous distribution of Al₂O₃ nano-particles acting as a second phase dispersion strengthening mechanism. The fracture surfaces of plain Sn–Zn solder joints exhibited a brittle fracture mode with smooth surfaces while Sn–Zn solder joints containing Al₂O₃ nano-particles showed a typical ductile failure with very rough dimpled surfaces.     

40 GHz Vertical Transition with a Dual‐Mode Cavity for a Low‐Temperature Co‐fired Ceramic Transceiver Module

A new vertical transition between a substrate integrated waveguide in a low‐temperature co‐fired ceramic substrate and an air‐filled standard waveguide is proposed in this paper. A rectangular cavity resonator with closely spaced metallic vias is designed to connect the substrate integrated waveguide to the standard air‐filled waveguide. Physical characteristics of an air‐filled WR‐22 to WR‐22 transition are compared with those of the proposed transition. Simulation and experiment demonstrate that the proposed transition shows a ?1.3 dB insertion loss and 6.2 GHz bandwidth with a 10 dB return loss for the back‐to‐back module. A 40 GHz low‐temperature co‐fired ceramic module with the proposed vertical transition is also implemented. The implemented module is very compact, measuring 57 mm × 28 mm × 3.3 mm.     

Phase-induced intensity noise in Bragg-grating-pair delay line signal processors

Investigation of the phase-induced intensity noise generated by fibre Bragg-grating-pair delay line signal processors is presented. The phase noise expressions of the transmissive and reflective Bragg-grating-pair structures are derived for the first time. They show that the transmissive and reflective structures have different phase noise spectra even though they have the same transfer characteristic. Experimental results are presented to verify the theory.     

Performance analysis of three-class classifiers: properties of a 3-D ROC surface and the normalized volume under the surface for the ideal observer

Classification of a given observation to one of three classes is an important task in many decision processes or pattern recognition applications. A general analysis of the performance of three-class classifiers results in a complex 6-D receiver operating characteristic (ROC) space, for which no simple analytical tool exists at present. We investigate the performance of an ideal observer under a specific set of assumptions that reduces the 6-D ROC space to 3-D by constraining the utilities of some of the decisions in the classification task. These assumptions lead to a 3-D ROC space in which the true-positive fraction (TPF) can be expressed in terms of the two types of false-positive fractions (FPFs). We demonstrate that the TPF is uniquely determined by, and therefore is a function of, the two FPFs. The domain of this function is shown to be related to the decision boundaries in the likelihood ratio plane. Based on these properties of the 3-D ROC space, we can define a summary measure, referred to as the normalized volume under the surface (NVUS), that is analogous to the area under the ROC curve (AUC) for a two-class classifier. We further investigate the properties of the 3-D ROC surface and the NVUS for the ideal observer under the condition that the three class distributions are multivariate normal with equal covariance matrices. The probability density functions (pdfs) of the decision variables are shown to follow a bivariate log-normal distribution. By considering these pdfs, we express the TPF in terms of the FPFs, and integrate the TPF over its domain numerically to obtain the NVUS. In addition, we performed a Monte Carlo simulation study, in which the 3-D ROC surface was generated by empirical "optimal" classification of case samples in the multidimensional feature space following the assumed distributions, to obtain an independent estimate of NVUS. The NVUS value obtained by using the analytical pdfs was found to be in good agreemen- t with that obtained from the Monte Carlo simulation study. We also found that, under all conditions studied, the NVUS increased when the difficulty of the classification task was reduced by changing the parameters of the class distributions, thereby exhibiting the properties of a performance metric in analogous to AUC. Our results indicate that, under the conditions that lead to our 3-D ROC analysis, the performance of a three-class classifier may be analyzed by considering the ROC surface, and its accuracy characterized by the NVUS.     

Novel Continuously Tunable Microwave Photonic Bandpass Filter

A new technique for tuning the passband frequency of a microwave photonic bandpass filter is presented. It is based on controlling the polarization state of the signal in an amplified recirculating delay line loop with a polarizer at the output. A fixed wavelength laser can be used as an optical source. The filter has a sharp passband, which can be tuned continuously while maintaining the same passband width. Experimental results demonstrate continuous tuning capability of the high-resolution bandpass filter.