Unsupervised Scale-Consistent Depth Learning from Video

International Journal of Computer Vision - We propose a monocular depth estimation method SC-Depth, which requires only unlabelled videos for training and enables the scale-consistent...     

Smart remote-controller designed with combining speech-recognition microprocessor and wireless sensor networks

Microsystem Technologies - The objective of this study was to design a smart remote-controller combining with speech-recognition and self-learning function Module and blue-tooth wireless sensor...     

Stretchable,Antifreezing, Non-Drying,and Fast-Response Sensors Based on Cellulose Nanocomposite Hydrogels for Signal Detection

Conductive hydrogels have received widespread attention in the applications of biosensors, human–machine interface, and health recording electrodes. Herein, the conductive hydrogels integrated with antifreezing, water retention, reusable, and sensing performances are fabricated by introducing polyvinyl alcohol, cellulose nanofibril, MXene nanosheets, and glycerol. The as-prepared hydrogels present prominent electrical conductivity (2.58 mS cm⁻¹) and flexibility even at −18 °C. In addition, the hydrogels have favorable water retention performance and can reuse after heating and cooling. When used as sensors, the hydrogels illustrate high sensitivity (gauge factor of 2.30), fast response time (0.165 s), wide working strain range (559%), favorable linearity (R² = 0.999), and wide operating temperature range (−18 to 60 °C). The hydrogels can detect not only large strains of 10–200%, but also small strains of 1–5%, making them promising candidates for wearable sensors to monitor large and subtle movements.     

低熔点Cu-P基中间合金及其变质效果

利用差示扫描量热仪(DSC)、扫描电子显微镜(SEM)和金相显微镜等手段对Cu-P基中间合金进行了研究。结果表明，在二元共晶Cu-P中间合金中加入一定量的Sn可制成低熔点的Cu-16Sn-8P中间合金；在此基础上研制出一种熔点为630℃左右的低熔点的多元Cu-P基中间合金。与Cu-P中间合金相比，该低熔点多元Cu-P基中间合金对过共晶AI-24Si合金具有更好的变质效果。同时，该中间合金对ZL109合金也具有良好的变质效果。     

Ce对过共晶Al—Si合金熔体粘滞性和结构的影响

研究了Ce对Al—16％Si合金熔体粘滞性的影响。结果表明：Ce的加入增加了合金熔体的粘度，且随着Ce含量的增加粘度值也增加。结合加入Ce的Al—16％Si合金氢含量的变化、凝固组织和DSC曲线研究了熔体结构的变化，分析了粘度与液态结构变化之间的关系。     

机床的静压系统及润滑

对机床的静压系统及其发展过程进行了综述 ,介绍了静压系统的基本结构、特点及其在机床中的各种运用。     

辅锅控制程序在CENTUM-CS上的实现

全面介绍辅锅点火系统，从硬件配置、安全条件、点火逻辑和软件组态等几个方面论述辅锅控制程序的原理及其在CENTUM—CS上的实现方法，对CS系统的进一步开发利用具有较大的启发和借鉴作用。     

溴素法α-溴代间氯苯丙酮合成研究

在金属卤化物催化剂 HD2 0 0 1存在下 ,溴与间氯苯丙酮在乙酸中反应得到盐酸安非他酮中间体 α-溴代间氯苯丙酮。最佳反应条件是 :n(间氯苯丙酮 )∶n(溴 ) =1∶ 1 ,催化剂用量为 1 %(质量分数 ) ,溴滴加时间为 1 h,反应温度为 1 0°C,此条件下 ,产物纯度为 98.83%,收率为 96.1 %。     

氧化焰烧成铜红釉

本研究以SiC作还原剂，采用氧化焰烧成，试制成功了在1250～1260℃下烧成的铜红釉，克服了传统的还原焙烧成方法的不足，简化了生产工艺，提高了铜红釉的成品率。     

聚丙烯塑料中二叔丁基过氧化物的测定

研究了在冰醋酸－盐酸介质中，以ＮａＩ作还原剂，Ｆｅ３＋作催化剂，测定二叔丁基过氧化物的条件，建立了在１００℃条件下催化碘量法测定二叔丁基过氧化物的新方法。该法用于聚丙烯塑料中微量过氧化物的测定，准确、可靠、方便。回收率为９８．７％，相对标准偏差为０．６４％。