Experimental investigation of forced and mixed convection heat transfer in a foam-filled horizontal rectangular channel

An experimental study was performed to investigate the heat transfer characteristics of the mixed convection flow through a horizontal rectangular channel where open-cell metal foams of different pore densities (10, 20 and 30 PPI) were situated. A uniform heat flux was applied at all of the bounding walls of the channel. For each of three values of the uniform heat flux, temperatures were measured on the entire surfaces of the walls. Results for the average and local Nusselt numbers are presented as functions of the Reynolds and Richardson numbers. The Reynolds number based on the channel height of the rectangular channel was varied from 600 to 33000, while the Richardson number ranged from 0.02 to 103, extending over forced, mixed and natural convection. Second important parameter that influences the heat transfer is the aspect ratio of the foams. Three different aspect ratios (AR) as 0.25, 0.5 and 1 are tested. Based on the experimental data, new empirical correlations have been constructed to link the Nusselt number. The results of all cases were compared to that of the empty channel and the literature. We found that our results were in agreement with those that are mentioned in the literature.     

Energetic–exergetic-economic analyses of a cogeneration thermic power plant in Turkey

In present study the exergy and economical analysis of a cogeneration plant system in Turkey (Esenyurt Thermic Power Plant) was performed based on the measured data during the operation time of the system. First and second laws of thermodynamics are adapted to the measured data. Furthermore, fuel-utilization efficiency, rate of power heat and rate of process heat are determined. The system is considered as a steady-state open thermodynamic system.     

Determination of Critical Aggregation Concentration in the Poly-(vinylpyrrolidone)–Sodium Dodecyl Sulfate System by Capillary Electrophoresis

We introduce an alternative separation method, i.e., capillary electrophoresis to examine the polymer/surfactant interaction. The migration behavior of the poly-(vinylpyrrolidone)–sodium dodecyl sulfate (PVP–SDS) model system was screened under a high electrical field for seven different PVP initial concentrations. From the electrophoretic mobilities of formed polymer–surfactant species, the critical aggregation concentration (CAC) of SDS for PVP was determined. The CAC value in the present study was very well matched with the CAC values of this system reported by alternative methods. A strong interaction between polymer and SDS under CAC concentration was observed and the independence of CAC on polymer concentration was experimentally demonstrated.     

THE METHOD OF LINES SOLUTION OF THE DISCRETE ORDINATES METHOD FOR RADIATIVE HEAT TRANSFER IN ENCLOSURES

A radiation code based on the method of lines (MOL) solution of the discrete ordinates method (DOM) for transient three-dimensional radiative heat transfer in rectangular enclosures for use in conjunction with a computational fluid dynamics (CFD) code based on the same approach was developed. Assessment of the predictive accuracy of the code by benchmarking its steady-state solutions against exact solutions on one- and three-dimensional test problems shows that the MOL solution of the DOM provides accurate and computationally efficient solutions for radiative heat fluxes and source terms and can be used with confidence in conjunction with CFD codes for transient problems.     

Consumption of green coffee and the risk of chronic diseases

ABSTRACT

Green coffee contains macro nutrients such as carbohydrates, protein, fat, as well as minor components such as caffeine, trigonelin and chlorogenic acid. Phenolics, chlorogenic acids and brown pigments are sources of natural antixodants. High polypehonic materials found in green coffee and especially chlorogenic acid in it have an important place. It is considered that; green coffee has effects on body mass, blood glucose and lipid levels, blood pressure, prevention from cardiovascular diseases which is based on chlorogenic acid consisting antioxidant activity. However, many topics like toxicological effects, doses, amounts, usage in the body, advantages and disadvantages, etc. of these active molecules need to be examined. For these reasons this article was rewieved to evaluate health effects of green coffee.     

A deep learning–based method for the design of microstructural materials

Structural and Multidisciplinary Optimization - Due to their designable properties, microstructural materials have emerged as an important class of materials that have the potential for used in a...     

Synthesis of bisphenol a novolac epoxy resins for coating applications

Bisphenol A novolacs were synthesized in both melting and solution processes using p‐formaldehyde and formalin solution in presence of oxalic acid catalyst, respectively. Hydrogen nuclear magnetic resonance, ¹H NMR, investigations show a high methylene bridge contents in the novolacs synthesized in a melting process. These novolacs were analyzed by gel permation chromatography (GPC) and fourier transform infrared spectroscopy (FTIR). The bisphenol A novolac was cured with 1‐(2‐amino ethyl) piprazine (AEP) as a curing agent for epoxy resins. The cured resins were evaluated as organic coating for steel. The mechanical properties of the cured epoxy resins were evaluated. The chemical resistances of the cured resins were evaluated through salt spray resistance, hot water, solvents, acid and alkali resistance measurements. The data indicate that the cured epoxy resins have excellent chemical resistances as organic coatings among other cured resins. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A remote scanning Raman spectrometer for in situ measurements of works of art

In conservation science, one of the main concerns is to extract information from an artistic surface without damaging it. Raman spectroscopy has emerged in recent years as a reliable tool for the non-destructive analysis of a wide range of inorganic and organic materials in works of art and archaeological objects. Nevertheless, the technique is still mainly limited to the analysis of micro-samples taken from artistic surfaces. The development of an instrument able to perform non-contact analysis of an area of a few square centimeters aims to further increase the employment of this technique. This paper describes the development of a prototype Raman scanning spectrometer based on a diode laser, a 2D scanning mirror stage and a custom optical system, which can map a surface of 6 cm in diameter at a working distance of 20 cm. The device exhibits collecting optics with a depth of field close to 6 cm, which makes the Raman system suitable for the analysis of non-flat surfaces and three-dimensional objects. In addition, the overall dimensions and weight of the instrument have been limited in order to make the device transportable and, in principle, usable for in situ measurements. Details on the design of the device, with particular emphasis on the collecting optical system, and on results of the characterization tests carried out to assess its performances are reported. Finally, an example of an application involving the identification of pigments from a model painting is presented.     

The effect of substrate on the composition of polyhydroxyalkanoates in enhanced biological phosphorus removal

This paper primarily evaluates the effect of external substrate type on the composition of polyhydroxyalkanoates in enhanced biological phosphorus removal (EBPR). Two sets of sequencing batch reactors (SBRs) are operated for this purpose, one with acetate and the other with propionate as the sole carbon source at different influent COD/phosphate ratios in the range 6.7–20 mgCOD mg^?1P. Results indicate that propionate is a more efficient substrate for EBPR, enabling total phosphate removal regardless of the change in COD/phosphate ratio. Total polyhydroxyalkanoates formation of 267–291 mgCOD L^?1 with a slight increase at higher influent phosphorus levels is observed for acetate experiments, and a slightly lower level of 250–280 mgCOD L^?1, with a similar trend for propionate experiments. The volatile fatty acid type and composition in the influent induces a significant difference in the polyhydroxyalkanoates composition of the two sets of activated sludge sustained in corresponding SBR systems. Propionate is mostly stored as 3‐hydroxy‐2‐methylvalerate and polyhydroxyvalerate, while acetate is stored as polyhydroxybutyrate. The P uptake rate in SBRs fed with propionate is considerably higher than that in the acetate reactors. Parallel batch experiments yield different results, especially for systems fed with acetate, indicating that the enzymatic system to metabolize propionate is not rapidly established, always yielding a dominant polyhydroxybutyrate fraction in the generated polyhydroxyalkanoates regardless of the level of propionate in the feed. Copyright © 2007 Society of Chemical Industry