Synthesis and characterization of caprolactone based polyurethane with degradable and antifouling performance

In this work,a degradable polyurethane composed of caprolactone(CL)and L-Lactide(LLA)as soft seg-ments,and 4,4'-methylenebis(cyclohexyl isocyanate)(H12MDI)and polytetramethylene ether glycol(PTMEG)as hard segments,was prepared.Hydrolytic degradation experiment revealed that the degrad-able polyurethane(PU)could be degraded in artificial seawater.It also showed that caprolactone-co-polyurethane(CL-PU)copolymer with higher crystallinity degraded much slower in artificial seawater.However,the introduction of LLA resulted in an increase in the hydrophilicity and reduction in the crys-tallinity of degradable PU,as demonstrated by the contact angle analysis.The result of the scanning elec-tron microscope showed that the surface of degradable PU renewed under static condition.Moreover,degradable PU was able to be used as a carrier,and it controlled the release rate of 4,5-dichloro-2-octyl-isothiazolone(DCOIT).The anti-diatom(Navicula incerta)test demonstrated that the(caprolactone-co-L-lactide)-co-polyurethane 4(CL/LAx-PU4)with DCOIT contents prevented the adhe-sion of diatom Navicula incerta(88.37％reduction)due to their self-polishing and the release of antifou-lants.Therefore,the degradable PU consisted of CL,LLA,and DCOIT could be a durable resin with good antifouling activity for the application in the marine anti-biofouling field.     

PAN/FPU Composite Nanofiber Membrane with Superhydrophobic and Superoleophobic Surface as a Filter Element for High-Efficiency Protective Masks

Recently, because of the outbreak of COVID-19, the demand for various types of filter elements in protective materials has increased globally. Furthermore, new requirements for the filtration performance of PM2.5 liquid (oil) particles have been put forward. In this work, Superhydrophobic and superoleophobic composite nanofibers with excellent filtration capacity for oil and salt particles are developed through the modification of polyacrylonitrile (PAN) by fluoro-polyurethane (FPU) doping. The results show that the PAN/FPU composite nanofibers doped with 9 wt% FPU has a uniform fiber morphology with a diameter of 240 ± 30 nm. Compared to the pure PAN nanofibers, the water-based contact angle of PAN/FPU increases from 90 ± 5° to 151 ± 5°, and the oil-based contact angle increases from 58 ± 2° to 152 ± 3°. Importantly, at a high flow rate of 95 L min⁻¹, the filtration efficiency of the PAN/FPU nanofiber membrane for 0.3 µm oil particles increases from 92 ± 1% to 99.2 ± 0.1%. After cyclic loading, the filtration efficiency of 0.3 µm oil particles remains above 98%. Meanwhile, the filtration efficiency for 0.3 µm salt particles remains at 98.23 ± 0.1%. The PAN/FPU nanofiber membrane developed in this work is effective in applications and has good market prospects as a protective filtration material.     

改性环氧树脂在立磨主减速机基础修复的应用

某公司一条60万t/年矿渣微粉生产线,使用的是其他公司出售的二手立磨设备,经过异地拆卸、分解运输至新生产线进行组装和调试。经过3个月左右的使用,立磨主减速机出现了较大幅度的周期性摆动（无需仪器检测,肉眼可见摆动幅度）,基础钢底板周期性弹动。     

Co-colouration Effects in the Systems of Metal(Ⅱ)-Rare Earth(Ⅲ)-Xanthene Dye and Their Influences on Photometric Determination of Metal Ions

After comparing the influences of each rare earth(Ⅲ),11 species of metal(Ⅱ)and 8 species of acidictriphenylmethane dye on the formation of coloured coordination compound in the system of Metal(Ⅱ)-RE(Ⅲ)-Dye,it was proven that the co-colouration effect can be caused only by the xanthene dyes(XD)con-taining substituting hydroxy.group on the ortho-position of etheric oxygen group.Besides,the radius of met-al(Ⅱ)must not be smaller than a definite limit;otherwise,no co-colouration appears.Furthermore,the acid-ity of medium is another important factor to affect co-colouration,Bromopyrogallol red causesco-colouration of Pb(Ⅱ)-RE(Ⅲ)only,owing to its higher chromophoric acidity;while alizarin violet causesco-colouration of M(Ⅱ)-RE(Ⅲ)(M=Pb,Ca,Sr and Ba),due to its lower chromophoric acidity.The condi-tions causing co-colouration,the regularities of co-colouration and the influences of co-colouration inphotometric determination of metals were discussed.     

The improvement of thermal error modeling and compensation on machine tools by CMAC neural network

In this paper, a cerebellar model articulation controller (CMAC) neural network is proposed for thermal error modeling in machine tools. The CMAC is a systematic learning algorithm which can search for the nonlinear and interaction characteristics between the thermal errors and temperature field on the machine tools. The CMAC is investigated in terms of accuracy in prediction, robustness to sensor placement, speed of learning, and tolerance to sensor failures. Experimental measurements of the spindle drift errors for both a horizontal machining center and a CNC turning center were performed using capacitance sensors and thermal sensors. Results show that the CMAC model has better performance than other modeling methods in robustness to sensor placement and speed of learning. This makes determination of the sensor locations easier, and reduces calibration time. In addition, a sensor failure detection algorithm is developed to provide better reliability.     

含B4C中性盐浴渗硼工艺问题的研究

在含Ｂ４Ｃ中性盐浴渗硼的高温反应研究的基础上，对该盐浴存在的工艺问题进行了分析研究。指出了渗硼能力均匀性，工件表面腐蚀斑与玻璃体的关系，分析了老化盐致使工件清洗困难的成因。     

PZT／Terfenol-D／PVDF层状复合磁电材料谐振特性

采用热压法制备出二层锆钛酸铅(PZT)／聚偏氟乙烯(PVDF)与1层Tb0.28Dy0.72Fe2(Terfenol-D)／PVDF叠层结构的三元复合磁电材料，研究了不同PVDF含量，以及不同层厚比tp／L对样品的介电常数、介电损耗、电阻率、谐振频率以及磁电转换系数αE33，αE31的影响规律，结果显示PVDF的含量和层厚比都存在最佳值(最佳值出现在产0．5，tp／L=2／7)，并且在这个最佳值处，磁电转换系数达到最大。     

报废车回收离国际化标准还有多远

国家发改委、科技部、环保总局正式对外发布的<汽车产品回收利用技术政策>中明确指出,加强汽车生产者责任的管理,在汽车生产、使用、报废、回收等环节建立起以汽车生产企业为主导的管理体系,并提出自2010年起,我国汽车生产企业或进口汽车总代理商要负责回收处理其销售的汽车产品及其包装物品.     

双包络TI-环面蜗杆传动的二次包络分析

在一次包络分析的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。齿面接触分析表明：齿面呈双线接触,润滑条件好,承载能力大,在重型机械传动装置中具有实用价值。     

低成本钛合金制备技术研究进展

为了降低钛合金的生产成本,美、俄、日、中等国家都在此领域进行了广泛的研究。对国际上新出现的以降低钛合金生产成本为目的的新冶金方法、新的低成本合金化钛合金和新的加工生产技术进行了综述。目前,国际上研究较为活跃的低成本钛冶炼新方法有FFC剑桥法、Armstrong工艺、EMR复合阳极工艺、SRI工艺、Idaho钛工艺及OS工艺。其中,以FFC剑桥法为代表的TiO2直接电解还原方法,最有希望成为替代传统Kroll工艺的新方法。